Re: [PATCH v2] usb: serial: option: Add support for u-blox LARA-R6 family

[Johan Hovold <johan@kernel.org>]

On Mon, Jul 05, 2021 at 07:44:21PM +0000, Marco De Marco wrote:
> The patch is meant to support LARA-R6 Cat 1 module family.
> 
> Module USB ID:
> Vendor  ID: 0x05c6
> Product ID: 0x90fA
> 
> Interface layout:
> If 0: Diagnostic
> If 1: AT parser
> If 2: AT parser
> If 3: QMI wwan (not available in all versions)
> 
> Signed-off-by: Marco De Marco <marco.demarco@posteo.net>
> 
> ---
> 
> ADB interface is not available. 
> Diagnostic interface (If 0) can be used with option driver.
> 
> Output of usb-devices command (this version does not have QMI WWAN):
> T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  3 Spd=480 MxCh= 0
> D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
> P:  Vendor=05c6 ProdID=90fa Rev=00.00
> S:  Manufacturer=Qualcomm, Incorporated
> S:  Product=Qualcomm CDMA Technologies MSM
> S:  SerialNumber=7da8aacd
> C:  #Ifs= 3 Cfg#= 1 Atr=c0 MxPwr=500mA
> I:  If#=0x0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=(none)
> I:  If#=0x1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
> I:  If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=fe Prot=ff Driver=(none)
> 
> Thanks for your patience and the tireless endeavour.

Thanks for the update. I'll pick this one up next week when -rc1 is out.

Johan