From: Heikki Krogerus <heikki.krogerus@linux.intel.com>
To: Sven Peter <sven@svenpeter.dev>
Cc: "Greg Kroah-Hartman" <gregkh@linuxfoundation.org>,
"Guido Günther" <agx@sigxcpu.org>,
"Bryan O'Donoghue" <bryan.odonoghue@linaro.org>,
linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org,
"Hector Martin" <marcan@marcan.st>,
"Mohamed Mediouni" <mohamed.mediouni@caramail.com>,
"Stan Skowronek" <stan@corellium.com>,
"Mark Kettenis" <mark.kettenis@xs4all.nl>,
"Alexander Graf" <graf@amazon.com>,
"Alyssa Rosenzweig" <alyssa@rosenzweig.io>
Subject: Re: [PATCH v3 5/6] usb: typec: tipd: Switch CD321X power state to S0
Date: Thu, 30 Sep 2021 13:10:37 +0300 [thread overview]
Message-ID: <YVWNHad3Yubhk81h@kuha.fi.intel.com> (raw)
In-Reply-To: <20210928155502.71372-6-sven@svenpeter.dev>
On Tue, Sep 28, 2021 at 05:55:01PM +0200, Sven Peter wrote:
> The Apple CD321x comes up in a low-power state after boot. Usually, the
> bootloader will already power it up to S0 but let's do it here as well
> in case that didn't happen.
>
> Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
> Suggested-by: Stan Skowronek <stan@corellium.com>
> Signed-off-by: Sven Peter <sven@svenpeter.dev>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
> ---
> no changes since v2
>
> changes since v1:
> - dropped the supports_spss flag and only call this for the Apple chip
> - added Alyssa's r-b
>
> drivers/usb/typec/tipd/core.c | 37 +++++++++++++++++++++++++++++++
> drivers/usb/typec/tipd/tps6598x.h | 6 +++++
> 2 files changed, 43 insertions(+)
>
> diff --git a/drivers/usb/typec/tipd/core.c b/drivers/usb/typec/tipd/core.c
> index cc4a154eabcb..c74fc9ae1686 100644
> --- a/drivers/usb/typec/tipd/core.c
> +++ b/drivers/usb/typec/tipd/core.c
> @@ -30,6 +30,7 @@
> #define TPS_REG_INT_MASK2 0x17
> #define TPS_REG_INT_CLEAR1 0x18
> #define TPS_REG_INT_CLEAR2 0x19
> +#define TPS_REG_SYSTEM_POWER_STATE 0x20
> #define TPS_REG_STATUS 0x1a
> #define TPS_REG_SYSTEM_CONF 0x28
> #define TPS_REG_CTRL_CONF 0x29
> @@ -152,6 +153,11 @@ static int tps6598x_block_write(struct tps6598x *tps, u8 reg,
> return regmap_raw_write(tps->regmap, reg, data, len + 1);
> }
>
> +static inline int tps6598x_read8(struct tps6598x *tps, u8 reg, u8 *val)
> +{
> + return tps6598x_block_read(tps, reg, val, sizeof(u8));
> +}
> +
> static inline int tps6598x_read16(struct tps6598x *tps, u8 reg, u16 *val)
> {
> return tps6598x_block_read(tps, reg, val, sizeof(u16));
> @@ -635,6 +641,32 @@ static int tps6598x_psy_get_prop(struct power_supply *psy,
> return ret;
> }
>
> +static int cd321x_switch_power_state(struct tps6598x *tps, u8 target_state)
> +{
> + u8 state;
> + int ret;
> +
> + ret = tps6598x_read8(tps, TPS_REG_SYSTEM_POWER_STATE, &state);
> + if (ret)
> + return ret;
> +
> + if (state == target_state)
> + return 0;
> +
> + ret = tps6598x_exec_cmd(tps, "SPSS", sizeof(u8), &target_state, 0, NULL);
> + if (ret)
> + return ret;
> +
> + ret = tps6598x_read8(tps, TPS_REG_SYSTEM_POWER_STATE, &state);
> + if (ret)
> + return ret;
> +
> + if (state != target_state)
> + return -EINVAL;
> +
> + return 0;
> +}
> +
> static int devm_tps6598_psy_register(struct tps6598x *tps)
> {
> struct power_supply_config psy_cfg = {};
> @@ -707,6 +739,11 @@ static int tps6598x_probe(struct i2c_client *client)
> return ret;
>
> if (np && of_device_is_compatible(np, "apple,cd321x")) {
> + /* Switch CD321X chips to the correct system power state */
> + ret = cd321x_switch_power_state(tps, TPS_SYSTEM_POWER_STATE_S0);
> + if (ret)
> + return ret;
> +
> /* CD321X chips have all interrupts masked initially */
> ret = tps6598x_write64(tps, TPS_REG_INT_MASK1,
> APPLE_CD_REG_INT_POWER_STATUS_UPDATE |
> diff --git a/drivers/usb/typec/tipd/tps6598x.h b/drivers/usb/typec/tipd/tps6598x.h
> index e13b16419843..3dae84c524fb 100644
> --- a/drivers/usb/typec/tipd/tps6598x.h
> +++ b/drivers/usb/typec/tipd/tps6598x.h
> @@ -135,6 +135,12 @@
> #define APPLE_CD_REG_INT_STATUS_UPDATE BIT(8)
> #define APPLE_CD_REG_INT_PLUG_EVENT BIT(1)
>
> +/* TPS_REG_SYSTEM_POWER_STATE states */
> +#define TPS_SYSTEM_POWER_STATE_S0 0x00
> +#define TPS_SYSTEM_POWER_STATE_S3 0x03
> +#define TPS_SYSTEM_POWER_STATE_S4 0x04
> +#define TPS_SYSTEM_POWER_STATE_S5 0x05
> +
> /* TPS_REG_POWER_STATUS bits */
> #define TPS_POWER_STATUS_CONNECTION(x) TPS_FIELD_GET(BIT(0), (x))
> #define TPS_POWER_STATUS_SOURCESINK(x) TPS_FIELD_GET(BIT(1), (x))
> --
> 2.25.1
--
heikki
next prev parent reply other threads:[~2021-09-30 10:11 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-09-28 15:54 [PATCH v3 0/6] usb: typec: tipd: Add Apple M1 support Sven Peter
2021-09-28 15:54 ` [PATCH v3 1/6] dt-bindings: usb: tps6598x: Add Apple CD321x compatible Sven Peter
2021-09-28 15:54 ` [PATCH v3 2/6] usb: typec: tipd: Split interrupt handler Sven Peter
2021-09-30 10:08 ` Heikki Krogerus
2021-09-28 15:54 ` [PATCH v3 3/6] usb: typec: tipd: Add short-circuit for no irqs Sven Peter
2021-09-28 15:55 ` [PATCH v3 4/6] usb: typec: tipd: Add support for Apple CD321X Sven Peter
2021-09-30 10:09 ` Heikki Krogerus
2021-09-28 15:55 ` [PATCH v3 5/6] usb: typec: tipd: Switch CD321X power state to S0 Sven Peter
2021-09-30 10:10 ` Heikki Krogerus [this message]
2021-09-28 15:55 ` [PATCH v3 6/6] usb: typec: tipd: Remove FIXME about testing with I2C_FUNC_I2C Sven Peter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=YVWNHad3Yubhk81h@kuha.fi.intel.com \
--to=heikki.krogerus@linux.intel.com \
--cc=agx@sigxcpu.org \
--cc=alyssa@rosenzweig.io \
--cc=bryan.odonoghue@linaro.org \
--cc=graf@amazon.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=marcan@marcan.st \
--cc=mark.kettenis@xs4all.nl \
--cc=mohamed.mediouni@caramail.com \
--cc=stan@corellium.com \
--cc=sven@svenpeter.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).