Re: [PATCH v13 06/10] usb: dwc3: qcom: Enable wakeup for applicable ports of multiport

[Johan Hovold <johan@kernel.org>]

On Sat, Oct 07, 2023 at 09:18:02PM +0530, Krishna Kurapati wrote:
> Currently wakeup is supported by only single port controllers. Read speed
> of each port and accordingly enable IRQ's for those ports.
> 
> Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
> ---
>  drivers/usb/dwc3/dwc3-qcom.c | 65 +++++++++++++++++++-----------------
>  1 file changed, 35 insertions(+), 30 deletions(-)
> 
> diff --git a/drivers/usb/dwc3/dwc3-qcom.c b/drivers/usb/dwc3/dwc3-qcom.c
> index 863892284146..651b9775a0c2 100644
> --- a/drivers/usb/dwc3/dwc3-qcom.c
> +++ b/drivers/usb/dwc3/dwc3-qcom.c
> @@ -90,7 +90,7 @@ struct dwc3_qcom {
>  	 */
>  	int			phy_irq[NUM_PHY_IRQ - 1][DWC3_MAX_PORTS];
>  	int			hs_phy_irq;
> -	enum usb_device_speed	usb2_speed;
> +	enum usb_device_speed	usb2_speed[DWC3_MAX_PORTS];

This also belongs in a new port structure.

>  	struct extcon_dev	*edev;
>  	struct extcon_dev	*host_edev;
> @@ -335,7 +335,8 @@ static bool dwc3_qcom_is_host(struct dwc3_qcom *qcom)
>  	return dwc->xhci;
>  }
>  
> -static enum usb_device_speed dwc3_qcom_read_usb2_speed(struct dwc3_qcom *qcom)
> +static enum usb_device_speed dwc3_qcom_read_usb2_speed(struct dwc3_qcom *qcom,
> +							int port_index)

No need for line break (since it's a function definition).

>  {
>  	struct dwc3 *dwc = platform_get_drvdata(qcom->dwc3);
>  	struct usb_device *udev;
> @@ -348,12 +349,10 @@ static enum usb_device_speed dwc3_qcom_read_usb2_speed(struct dwc3_qcom *qcom)
>  
>  	/*
>  	 * It is possible to query the speed of all children of
> -	 * USB2.0 root hub via usb_hub_for_each_child(). DWC3 code
> -	 * currently supports only 1 port per controller. So
> -	 * this is sufficient.
> +	 * USB2.0 root hub via usb_hub_for_each_child().

This comment no longer makes sense with your current implementation.

But perhaps this should be done using usb_hub_for_each_child() instead
as that may be more efficient. Then you use this function to read out
the speed for all the ports in go (and store it in the port structures I
mentioned). Please determine which alternative is best.

>  	 */
>  #ifdef CONFIG_USB
> -	udev = usb_hub_find_child(hcd->self.root_hub, 1);
> +	udev = usb_hub_find_child(hcd->self.root_hub, port_index + 1);
>  #else
>  	udev = NULL;
>  #endif
> @@ -386,23 +385,29 @@ static void dwc3_qcom_disable_wakeup_irq(int irq)
>  
>  static void dwc3_qcom_disable_interrupts(struct dwc3_qcom *qcom)
>  {
> +	int i;
> +
>  	dwc3_qcom_disable_wakeup_irq(qcom->hs_phy_irq);
>  
> -	if (qcom->usb2_speed == USB_SPEED_LOW) {
> -		dwc3_qcom_disable_wakeup_irq(qcom->phy_irq[DM_HS_PHY_IRQ_INDEX][0]);
> -	} else if ((qcom->usb2_speed == USB_SPEED_HIGH) ||
> -			(qcom->usb2_speed == USB_SPEED_FULL)) {
> -		dwc3_qcom_disable_wakeup_irq(qcom->phy_irq[DP_HS_PHY_IRQ_INDEX][0]);
> -	} else {
> -		dwc3_qcom_disable_wakeup_irq(qcom->phy_irq[DP_HS_PHY_IRQ_INDEX][0]);
> -		dwc3_qcom_disable_wakeup_irq(qcom->phy_irq[DM_HS_PHY_IRQ_INDEX][0]);
> -	}
> +	for (i = 0; i < qcom->num_ports; i++) {
> +		if (qcom->usb2_speed[i] == USB_SPEED_LOW) {
> +			dwc3_qcom_disable_wakeup_irq(qcom->phy_irq[DM_HS_PHY_IRQ_INDEX][i]);
> +		} else if ((qcom->usb2_speed[i] == USB_SPEED_HIGH) ||
> +			(qcom->usb2_speed[i] == USB_SPEED_FULL)) {
> +			dwc3_qcom_disable_wakeup_irq(qcom->phy_irq[DP_HS_PHY_IRQ_INDEX][i]);
> +		} else {
> +			dwc3_qcom_disable_wakeup_irq(qcom->phy_irq[DP_HS_PHY_IRQ_INDEX][i]);
> +			dwc3_qcom_disable_wakeup_irq(qcom->phy_irq[DM_HS_PHY_IRQ_INDEX][i]);
> +		}
>  
> -	dwc3_qcom_disable_wakeup_irq(qcom->phy_irq[SS_PHY_IRQ_INDEX][0]);
> +		dwc3_qcom_disable_wakeup_irq(qcom->phy_irq[SS_PHY_IRQ_INDEX][i]);
> +	}
>  }

The above is hardly readable, partly because of the 2d array that I
think you should drop, and partly because you add the port loop here
instead of in the caller.

A lot of these functions should become port operation where you either
pass in a port structure directly or possibly a port index as I've
mentioned before.

[ I realise that the confusion around hs_phy_irq may be partly to blame
for this but since that one is also a per-port interrupt, that's no
longer an issue. ]
 
>  static int dwc3_qcom_suspend(struct dwc3_qcom *qcom, bool wakeup)
> @@ -454,10 +461,8 @@ static int dwc3_qcom_suspend(struct dwc3_qcom *qcom, bool wakeup)
>  	 * The role is stable during suspend as role switching is done from a
>  	 * freezable workqueue.
>  	 */
> -	if (dwc3_qcom_is_host(qcom) && wakeup) {
> -		qcom->usb2_speed = dwc3_qcom_read_usb2_speed(qcom);

So just let this function update the usb2 speed for all ports unless
there are reasons not to.

> +	if (dwc3_qcom_is_host(qcom) && wakeup)
>  		dwc3_qcom_enable_interrupts(qcom);

And then iterate over the ports and enable the interrupts here as you
did above for the pwr_evnt_irqs.

> -	}
>  
>  	qcom->is_suspended = true;

Johan