[REGRESSION] ax88179_178a assigns the same MAC address to all USB network interfaces

[REGRESSION] ax88179_178a assigns the same MAC address to all USB network interfaces

[Jarkko Palviainen]

Hi,

Starting from kernel version 6.7.4 I hit the following problem: when I
connect two or more USB-to-ethernet adapters to the computer they get
assigned the same MAC address. Furthermore, the address is not the one
specified in any of the device labels but is selected seemingly at
random on boot.

This becomes a blocking issue when trying to use SYSTEMD.LINK(5) to
match the interfaces.

6.7.3 is OK, 6.7.4 introduces this behavior in the following upstream commit:
d2689b6a86b9 net: usb: ax88179_178a: avoid two consecutive device resets
Reverting this commit in 6.7.4 fixes the issue.

The behavior is also present in LTS 6.6.23. The commit has been
backported in 6.6.16.

Example system log when connecting two adapters. Both interfaces are
assigned address 02:a5:ab:80:e6:94.

kernel: usb 2-5.4: new SuperSpeed USB device number 3 using xhci_hcd
kernel: usb 2-5.4: New USB device found, idVendor=2001, idProduct=4a00, bcdDevice= 1.00
kernel: usb 2-5.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
kernel: usb 2-5.4: Product: D-Link DUB-1312
kernel: usb 2-5.4: Manufacturer: D-Link Elec. Corp.
kernel: usb 2-5.4: SerialNumber: 00000000001D4D
mtp-probe[2431]: checking bus 2, device 3: "/sys/devices/pci0000:00/0000:00:14.0/usb2/2-5/2-5.4"
mtp-probe[2431]: bus: 2, device: 3 was not an MTP device
kernel: ax88179_178a 2-5.4:1.0 eth0: register 'ax88179_178a' at usb-0000:00:14.0-5.4, D-Link DUB-1312 USB 3.0 to Gigabit Ethernet Adapter, 02:a5:ab:80:e6:94
kernel: usbcore: registered new interface driver ax88179_178a
mtp-probe[2436]: checking bus 2, device 3: "/sys/devices/pci0000:00/0000:00:14.0/usb2/2-5/2-5.4"
mtp-probe[2436]: bus: 2, device: 3 was not an MTP device
kernel: ax88179_178a 2-5.4:1.0 enp0s20f0u5u4: renamed from eth0
systemd-networkd[469]: eth0: Interface name change detected, renamed to enp0s20f0u5u4.

kernel: usb 1-5.3: new high-speed USB device number 8 using xhci_hcd
kernel: usb 1-5.3: New USB device found, idVendor=0b95, idProduct=1790, bcdDevice= 1.00
kernel: usb 1-5.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
kernel: usb 1-5.3: Product: AX88179
kernel: usb 1-5.3: Manufacturer: ASIX Elec. Corp.
kernel: usb 1-5.3: SerialNumber: 0000249B2BAEC8
kernel: ax88179_178a 1-5.3:1.0 eth0: register 'ax88179_178a' at usb-0000:00:14.0-5.3, ASIX AX88179 USB 3.0 Gigabit Ethernet, 02:a5:ab:80:e6:94
mtp-probe[2440]: checking bus 1, device 8: "/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.3"
mtp-probe[2440]: bus: 1, device: 8 was not an MTP device
kernel: ax88179_178a 1-5.3:1.0 enp0s20f0u5u3: renamed from eth0
systemd-networkd[469]: eth0: Interface name change detected, renamed to enp0s20f0u5u3.
mtp-probe[2444]: checking bus 1, device 8: "/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.3"
mtp-probe[2444]: bus: 1, device: 8 was not an MTP device

[REGRESSION] ax88179_178a assigns the same MAC address to all USB network interfaces

[Jose Ignacio Tornos Martinez]

Hello Jarkko,

So, you are using two (or more) devices in the same machine and they are
not getting the specific one and even they are getting the same locally
administered address (random).
It is strange that the second reset is affecting, because the read and
previosuly stored address should be the same with one reset or with two.
As the author of the commented commit, let me analyze it to try to fix it.

Best regards
José Ignacio