Re: [PATCHv3 1/2] dt-bindings: usb: typec: anx7688: start a binding document

[Pavel Machek <pavel@ucw.cz>]

[-- Attachment #1: Type: text/plain, Size: 1199 bytes --]

Hi!

> > Add binding for anx7688 usb type-c bridge. I don't have a datasheet,
> > but I did best I could.
> > 
> > Signed-off-by: Pavel Machek <pavel@ucw.cz>
> 
> ...
> 
> > +  cabledet-gpios:
> > +    maxItems: 1
> > +    description: GPIO controlling CABLE_DET (C3) pin.
> > +
> > +  avdd10-supply:
> > +    description: 1.0V power supply going to AVDD10 (A4, ...) pins
> > +
> > +  dvdd10-supply:
> > +    description: 1.0V power supply going to DVDD10 (D6, ...) pins
> > +
> > +  avdd18-supply:
> > +    description: 1.8V power supply going to AVDD18 (E3, ...) pins
> > +
> > +  dvdd18-supply:
> > +    description: 1.8V power supply going to DVDD18 (G4, ...) pins
> > +
> > +  avdd33-supply:
> > +    description: 3.3V power supply going to AVDD33 (C4, ...) pins
> > +
> > +  i2c-supply: true
> > +  vconn-supply: true
> 
> There are no such supplies like i2c and vconn on the schematics.
> 
> I think this represents some other part of component which was added
> here only for convenience.

Can you give me pointer to documentation you are looking at?

Best regards,
							Pavel
-- 
People of Russia, stop Putin before his war on Ukraine escalates.

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 195 bytes --]