From: Sakari Ailus <sakari.ailus@linux.intel.com>
To: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Cc: linux-usb@vger.kernel.org, Wentong Wu <wentong.wu@intel.com>
Subject: Re: [PATCH 3/3] usb: misc: ljca: print firmware version
Date: Mon, 4 Nov 2024 22:32:26 +0000 [thread overview]
Message-ID: <ZylLevdnD60TziGe@kekkonen.localdomain> (raw)
In-Reply-To: <20241104085056.652294-3-stanislaw.gruszka@linux.intel.com>
Hi Stanislaw,
Thanks for the patch.
On Mon, Nov 04, 2024 at 09:50:56AM +0100, Stanislaw Gruszka wrote:
> For diagnostics purposes read firmware version from device
> and print it to dmesg during initialization.
>
> Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
> ---
> drivers/usb/misc/usb-ljca.c | 28 ++++++++++++++++++++++++++++
> 1 file changed, 28 insertions(+)
>
> diff --git a/drivers/usb/misc/usb-ljca.c b/drivers/usb/misc/usb-ljca.c
> index 062b7fb47114..0f8751c51bf6 100644
> --- a/drivers/usb/misc/usb-ljca.c
> +++ b/drivers/usb/misc/usb-ljca.c
> @@ -43,6 +43,7 @@ enum ljca_client_type {
>
> /* MNG client commands */
> enum ljca_mng_cmd {
> + LJCA_MNG_GET_VERSION = 1,
> LJCA_MNG_RESET = 2,
> LJCA_MNG_ENUM_GPIO = 4,
> LJCA_MNG_ENUM_I2C = 5,
> @@ -68,6 +69,13 @@ struct ljca_msg {
> u8 data[] __counted_by(len);
> } __packed;
>
> +struct ljca_fw_version {
> + u8 major;
> + u8 minor;
> + __le16 patch;
> + __le16 build;
> +} __packed;
> +
> struct ljca_i2c_ctr_info {
> u8 id;
> u8 capacity;
> @@ -694,6 +702,24 @@ static int ljca_reset_handshake(struct ljca_adapter *adap)
> return 0;
> }
>
> +static void ljca_print_fw_version(struct ljca_adapter *adap)
> +{
> + struct ljca_fw_version version = {};
> + int ret;
> +
> + ret = ljca_send(adap, LJCA_CLIENT_MNG, LJCA_MNG_GET_VERSION, NULL, 0,
> + (u8 *)&version, sizeof(version), true, LJCA_WRITE_ACK_TIMEOUT_MS);
This would be nicer wrapped to up to 80 chars per line.
> +
> + if (ret != sizeof(version)) {
> + dev_err(adap->dev, "Get version failed, ret: %d\n", ret);
> + return;
> + }
> +
> + dev_info(adap->dev, "Firmware version: %d.%d.%d.%d\n",
> + version.major, version.minor,
> + le16_to_cpu(version.patch), le16_to_cpu(version.build));
> +}
> +
> static int ljca_enumerate_clients(struct ljca_adapter *adap)
> {
> struct ljca_client *client, *next;
> @@ -810,6 +836,8 @@ static int ljca_probe(struct usb_interface *interface,
> if (ret)
> goto err_free;
>
> + ljca_print_fw_version(adap);
> +
> pm_runtime_set_autosuspend_delay(&usb_dev->dev, 10);
> usb_enable_autosuspend(usb_dev);
>
--
Regards,
Sakari Ailus
next prev parent reply other threads:[~2024-11-04 22:32 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-11-04 8:50 [PATCH 1/3] usb: misc: ljca: move usb_autopm_put_interface() after wait for response Stanislaw Gruszka
2024-11-04 8:50 ` [PATCH 2/3] usb: misc: ljca: set small runtime autosuspend delay Stanislaw Gruszka
2024-11-04 13:50 ` Hans de Goede
2024-11-05 14:42 ` Stanislaw Gruszka
2024-11-04 15:13 ` Sakari Ailus
2024-11-05 6:41 ` Stanislaw Gruszka
2024-11-04 8:50 ` [PATCH 3/3] usb: misc: ljca: print firmware version Stanislaw Gruszka
2024-11-04 13:51 ` Hans de Goede
2024-11-04 22:32 ` Sakari Ailus [this message]
2024-11-04 13:39 ` [PATCH 1/3] usb: misc: ljca: move usb_autopm_put_interface() after wait for response Hans de Goede
2024-11-04 14:37 ` Stanislaw Gruszka
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ZylLevdnD60TziGe@kekkonen.localdomain \
--to=sakari.ailus@linux.intel.com \
--cc=linux-usb@vger.kernel.org \
--cc=stanislaw.gruszka@linux.intel.com \
--cc=wentong.wu@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).