[PATCH v3] USB: serial: option: add Telit Cinterion FE910C04 (ECM) composition

[PATCH v3] USB: serial: option: add Telit Cinterion FE910C04 (ECM) composition

[Fabio Porcedda]

Add Telit Cinterion FE910C04 (ECM) composition:
0x10c7: ECM + tty (AT) + tty (AT) + tty (diag)

usb-devices output:
T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  7 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1bc7 ProdID=10c7 Rev=05.15
S:  Manufacturer=Telit Cinterion
S:  Product=FE910
S:  SerialNumber=f71b8b32
C:  #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=06 Prot=00 Driver=cdc_ether
E:  Ad=82(I) Atr=03(Int.) MxPS=  16 Ivl=32ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=84(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=86(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

Cc: stable@vger.kernel.org
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
---
v3:
* Add missing change history

v2:
* https://lore.kernel.org/linux-usb/20250710115952.120835-1-fabio.porcedda@gmail.com/
* NCTRL_ALL -> NCTRL(4)

v1:
* https://lore.kernel.org/linux-usb/20250708120004.100254-1-fabio.porcedda@gmail.com/

 drivers/usb/serial/option.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index c0c44e594d36..147ca50c94be 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -1415,6 +1415,9 @@ static const struct usb_device_id option_ids[] = {
 	  .driver_info = NCTRL(5) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10d0, 0xff, 0xff, 0x40) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10d0, 0xff, 0xff, 0x60) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10c7, 0xff, 0xff, 0x30),	/* Telit FE910C04 (ECM) */
+	  .driver_info = NCTRL(4) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10c7, 0xff, 0xff, 0x40) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10d1, 0xff, 0xff, 0x30),	/* Telit FN990B (MBIM) */
 	  .driver_info = NCTRL(6) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10d1, 0xff, 0xff, 0x40) },
-- 
2.49.0

Re: [PATCH v3] USB: serial: option: add Telit Cinterion FE910C04 (ECM) composition

[Johan Hovold]

On Thu, Jul 10, 2025 at 02:16:38PM +0200, Fabio Porcedda wrote:
> Add Telit Cinterion FE910C04 (ECM) composition:
> 0x10c7: ECM + tty (AT) + tty (AT) + tty (diag)

> Cc: stable@vger.kernel.org
> Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
> ---
> v3:
> * Add missing change history
> 
> v2:
> * https://lore.kernel.org/linux-usb/20250710115952.120835-1-fabio.porcedda@gmail.com/
> * NCTRL_ALL -> NCTRL(4)
> 
> v1:
> * https://lore.kernel.org/linux-usb/20250708120004.100254-1-fabio.porcedda@gmail.com/

Applied, thanks.

Johan