Hi Jameson,

On Thu, Apr 02, 2026 at 06:24:38PM +0000, Jameson Thies wrote:
> Currently the partner usb_mode is only set in ucsi_register_partner().
> If the partner enters USB4 operation after it is registered, this is not
> reported to the typec class. The UCSI spec states that the Connector
> Partner Changed bit can represent a Connector Partner Flags change. When
> handling a UCSI partner change, check the partner flags for USB4
> operation.
> 
> Signed-off-by: Jameson Thies <jthies@google.com>

Reviewed-by: Benson Leung <bleung@chromium.org>


> ---
>  drivers/usb/typec/ucsi/ucsi.c | 6 ++++++
>  1 file changed, 6 insertions(+)
> 
> diff --git a/drivers/usb/typec/ucsi/ucsi.c b/drivers/usb/typec/ucsi/ucsi.c
> index fe1fb8a68a1d..e6fd2e2eba94 100644
> --- a/drivers/usb/typec/ucsi/ucsi.c
> +++ b/drivers/usb/typec/ucsi/ucsi.c
> @@ -1182,6 +1182,12 @@ static void ucsi_partner_change(struct ucsi_connector *con)
>  			if (UCSI_CONSTAT(con, PARTNER_FLAG_USB))
>  				typec_set_mode(con->port, TYPEC_STATE_USB);
>  		}
> +
> +		if (((con->ucsi->version >= UCSI_VERSION_3_0 &&
> +		    UCSI_CONSTAT(con, PARTNER_FLAG_USB4_GEN4)) ||
> +		    (con->ucsi->version >= UCSI_VERSION_2_0 &&
> +		    UCSI_CONSTAT(con, PARTNER_FLAG_USB4_GEN3))) && con->partner)
> +			typec_partner_set_usb_mode(con->partner, USB_MODE_USB4);
>  	}
>  
>  	if ((!UCSI_CONSTAT(con, PARTNER_FLAG_USB)) &&
> 
> base-commit: 81ebd43cc0d6d106ce7b6ccbf7b5e40ca7f5503d
> -- 
> 2.53.0.1213.gd9a14994de-goog
>