Re: [PATCH 3/7] dt-bindings: usb: add SpacemiT K1 DWC3 glue

[Krzysztof Kozlowski <krzk@kernel.org>]

On 07/04/2025 14:38, Ze Huang wrote:
> Add support for SpacemiT DWC3 glue driver, which manages interrupt,
> reset and clock resource.
> 
> Signed-off-by: Ze Huang <huangze@whut.edu.cn>
> ---
>  .../devicetree/bindings/usb/spacemit,k1-dwc3.yaml  | 78 ++++++++++++++++++++++
>  1 file changed, 78 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/usb/spacemit,k1-dwc3.yaml b/Documentation/devicetree/bindings/usb/spacemit,k1-dwc3.yaml

Combining 3 subsystems into one patchset is a poor idea.

> new file mode 100644
> index 0000000000000000000000000000000000000000..40ce3fd1330d5f371ec69155c237e10a65a9d8f4
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/usb/spacemit,k1-dwc3.yaml
> @@ -0,0 +1,78 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/usb/spacemit,k1-dwc3.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: SpacemiT K1 SuperSpeed DWC3 USB SoC Controller Glue
> +
> +maintainers:
> +  - Ze Huang <huangze@whut.edu.cn>
> +
> +properties:
> +  compatible:
> +    const: spacemit,k1-dwc3
> +
> +  ranges:
> +    maxItems: 1
> +
> +  clocks:
> +    maxItems: 1
> +
> +  resets:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  interconnects:

Missing maxItems

> +    description:
> +      On SpacemiT K1, USB performs DMA through bus other than parent DT node.
> +      The 'interconnects' property explicitly describes this path, ensuring
> +      correct address translation.
> +
> +  interconnect-names:
> +    const: dma-mem
> +
> +  # optional

Drop, Don't repeat constraints in free form text.

> +  vbus-supply:
> +    description: A phandle to the regulator supplying the VBUS voltage.
> +
> +patternProperties:
> +  '^usb@':
> +    $ref: snps,dwc3.yaml#

No, rather fold child into the parent.

> +
> +additionalProperties: false

This goes after required:, always.

> +
> +required:
> +  - compatible
> +  - ranges
> +  - clocks
> +  - resets
> +  - interrupts
> +  - interconnects
> +  - interconnect-names
> +
> +examples:
> +  - |
> +    usb@c0a00000 {
> +        compatible = "spacemit,k1-dwc3";
> +        clocks = <&syscon_apmu 16>;
> +        interrupts = <149>;
> +        interconnects = <&dram_range0>;
> +        interconnect-names = "dma-mem";
> +        ranges = <0x0 0xc0a00000 0x10000>;
> +        resets = <&syscon_apmu 8>;
> +        #address-cells = <1>;
> +        #size-cells = <1>;
> +        status = "disabled";

Nope, drop.



Best regards,
Krzysztof