Linux USB
 help / color / mirror / Atom feed
From: Atanas Dinev <atanasd@gmail.com>
To: Jim Lin <jilin@nvidia.com>,
	stern@rowland.harvard.edu, linux-usb@vger.kernel.org
Cc: usb-storage@lists.one-eyed-alien.net
Subject: Re: [PATCH 1/1] usb: storage: Add quirk for Samsung Fit flash
Date: Sat, 2 May 2020 15:56:45 +0200	[thread overview]
Message-ID: <bb4db5cf-60bc-9c0f-e1dc-3047542d2b42@gmail.com> (raw)
In-Reply-To: <1583158895-31342-1-git-send-email-jilin@nvidia.com>

Hello,

Jim Lin wrote on 02.03.20 15:21:
> Current driver has 240 (USB2.0) and 2048 (USB3.0) as max_sectors,
> e.g., /sys/bus/scsi/devices/0:0:0:0/max_sectors
> 
> If data access times out, driver error handling will issue a port
> reset.
> Sometimes Samsung Fit (090C:1000) flash disk will not respond to
> later Set Address or Get Descriptor command.
> 
> Adding this quirk to limit max_sectors to 64 sectors to avoid issue
> occurring.
> 
This may need revisiting as it appears to be a performance killer (3-4 times slower seq reads) for otherwise perfectly working sticks.
Going down from 2048 to 64 seems to cause a pretty significant speed degradation.
Here are a few examples:

# lsusb
Bus 002 Device 012: ID 090c:1000 Silicon Motion, Inc. - Taiwan (formerly Feiya Technology Corp.) Flash Drive
# lsusb -t
/:  Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/6p, 5000M
     |__ Port 3: Dev 12, If 0, Class=Mass Storage, Driver=usb-storage, 5000M

# dmesg
[23153.493726] usb 2-3: Product: Flash Drive FIT
[23153.493729] usb 2-3: Manufacturer: Samsung
[23153.493731] usb 2-3: SerialNumber: 0375119090033353
[23153.575386] usb-storage 2-3:1.0: USB Mass Storage device detected
[23153.575514] usb-storage 2-3:1.0: Quirks match for vid 090c pid 1000: 400
[23153.575559] scsi host2: usb-storage 2-3:1.0
[23153.576529] usbcore: registered new interface driver usb-storage
[23153.578645] usbcore: registered new interface driver uas

# cat /proc/scsi/usb-storage/*
    Host scsi2: usb-storage
        Vendor: Samsung
       Product: Flash Drive FIT
Serial Number: 0375119090033353
      Protocol: Transparent SCSI
     Transport: Bulk
        Quirks: MAX_SECTORS_64 SANE_SENSE

# hdparm -t /dev/sdb
  Timing buffered disk reads: 132 MB in  3.03 seconds = 43.62 MB/sec
# dd if=/dev/sdb of=/dev/null bs=1M count=1000
1048576000 bytes (1,0 GB, 1000 MiB) copied, 22,3564 s, 46,9 MB/s

# rmmod uas usb_storage
# modprobe usb_storage quirks=090c:1000:

# hdparm -t /dev/sdb
  Timing buffered disk reads: 452 MB in  3.01 seconds = 150.33 MB/sec
# dd if=/dev/sdb of=/dev/null bs=1M count=1000
1048576000 bytes (1,0 GB, 1000 MiB) copied, 6,51492 s, 161 MB/s


[23612.690798] usb 2-3: Product: Intenso High Speed Line
[23612.690799] usb 2-3: Manufacturer: SMI
[23612.690801] usb 2-3: SerialNumber: 19112500000332
[23612.780771] usb-storage 2-3:1.0: USB Mass Storage device detected
[23612.780895] usb-storage 2-3:1.0: Quirks match for vid 090c pid 1000: 400
[23612.780940] scsi host2: usb-storage 2-3:1.0
[23612.781093] usbcore: registered new interface driver usb-storage
[23612.783226] usbcore: registered new interface driver uas

# cat /proc/scsi/usb-storage/*
    Host scsi2: usb-storage
        Vendor: SMI
       Product: Intenso High Speed Line
Serial Number: 19112500000332
      Protocol: Transparent SCSI
     Transport: Bulk
        Quirks: MAX_SECTORS_64 SANE_SENSE

# hdparm -t /dev/sdb
  Timing buffered disk reads: 220 MB in  3.00 seconds = 73.22 MB/sec
# dd if=/dev/sdb of=/dev/null bs=1M count=1000
1048576000 bytes (1,0 GB, 1000 MiB) copied, 11,5469 s, 90,8 MB/s

# rmmod uas usb_storage
# modprobe usb_storage quirks=090c:1000:
# hdparm -t /dev/sdb
Timing buffered disk reads: 1016 MB in  3.00 seconds = 338.51 MB/sec
# dd if=/dev/sdb of=/dev/null bs=1M count=1000
1048576000 bytes (1,0 GB, 1000 MiB) copied, 3,31022 s, 317 MB/s


I'm using both sticks as a bootable/emergency media (Debian stable, kernel 4.19/no-quirks with X, XFCE, web browser, etc) and haven't had any issues with timeouts, unresponsiveness or whatsoever.

When tested with recent kernels (e.g. Debian testing/5.5, Ubuntu 20.04 LTS/5.4) it's slow.

Setting "options usb_storage quirks=090c:1000:" in /etc/modprobe.d as a workaround for now.

> Signed-off-by: Jim Lin <jilin@nvidia.com>
> ---
>   drivers/usb/storage/unusual_devs.h | 6 ++++++
>   1 file changed, 6 insertions(+)
> 
> diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
> index 1cd9b6305b06..1880f3e13f57 100644
> --- a/drivers/usb/storage/unusual_devs.h
> +++ b/drivers/usb/storage/unusual_devs.h
> @@ -1258,6 +1258,12 @@ UNUSUAL_DEV( 0x090a, 0x1200, 0x0000, 0x9999,
>   		USB_SC_RBC, USB_PR_BULK, NULL,
>   		0 ),
>   
> +UNUSUAL_DEV(0x090c, 0x1000, 0x1100, 0x1100,
> +		"Samsung",
> +		"Flash Drive FIT",
> +		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
> +		US_FL_MAX_SECTORS_64),
> +
>   /* aeb */
>   UNUSUAL_DEV( 0x090c, 0x1132, 0x0000, 0xffff,
>   		"Feiya",
> 

Thanks,
Atanas

  parent reply	other threads:[~2020-05-02 13:56 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-03-02 14:21 [PATCH 1/1] usb: storage: Add quirk for Samsung Fit flash Jim Lin
2020-03-02 15:46 ` Alan Stern
2020-05-02 13:56 ` Atanas Dinev [this message]
2020-05-02 14:38   ` Jim Lin
2022-09-12 12:58     ` sunghwan jung

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=bb4db5cf-60bc-9c0f-e1dc-3047542d2b42@gmail.com \
    --to=atanasd@gmail.com \
    --cc=jilin@nvidia.com \
    --cc=linux-usb@vger.kernel.org \
    --cc=stern@rowland.harvard.edu \
    --cc=usb-storage@lists.one-eyed-alien.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox