From: bugzilla-daemon@bugzilla.kernel.org
To: linux-usb@vger.kernel.org
Subject: [Bug 213839] XHCI 7 port usb hub does not work correctly
Date: Sat, 01 Jan 2022 18:46:44 +0000 [thread overview]
Message-ID: <bug-213839-208809-Q3PvjMM1XS@https.bugzilla.kernel.org/> (raw)
In-Reply-To: <bug-213839-208809@https.bugzilla.kernel.org/>
https://bugzilla.kernel.org/show_bug.cgi?id=213839
--- Comment #16 from Jonathan McDowell (noodles@earth.li) ---
Excellent. Your fix appears to make things work fine. Built it on top of
5.12.12, plugged in the hub, plugged flash drive into a port off the second hub
chip and it gets detected fine:
[ 64.055322] usb 1-1: new full-speed USB device number 2 using xhci_hcd
[ 64.223348] usb 1-1: New USB device found, idVendor=0a05, idProduct=7211,
bcdDevice= 1.00
[ 64.223357] usb 1-1: New USB device strings: Mfr=0, Product=1,
SerialNumber=0
[ 64.223360] usb 1-1: Product: USB2.0 HUB
[ 64.272644] hub 1-1:1.0: USB hub found
[ 64.275305] hub 1-1:1.0: 4 ports detected
[ 64.715299] usb 1-1.4: new full-speed USB device number 3 using xhci_hcd
[ 64.843578] usb 1-1.4: New USB device found, idVendor=0a05, idProduct=7211,
bcdDevice= 1.00
[ 64.843584] usb 1-1.4: New USB device strings: Mfr=0, Product=1,
SerialNumber=0
[ 64.843586] usb 1-1.4: Product: USB2.0 HUB
[ 64.880662] hub 1-1.4:1.0: USB hub found
[ 64.883305] hub 1-1.4:1.0: 4 ports detected
[ 78.843353] usb 1-1.4.2: new full-speed USB device number 4 using xhci_hcd
[ 78.982539] usb 1-1.4.2: not running at top speed; connect to a high speed
hub
[ 79.000617] usb 1-1.4.2: New USB device found, idVendor=0951,
idProduct=1697, bcdDevice= 1.00
[ 79.000626] usb 1-1.4.2: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 79.000629] usb 1-1.4.2: Product: DT Ultimate G3
[ 79.000631] usb 1-1.4.2: Manufacturer: Kingston
[ 79.000633] usb 1-1.4.2: SerialNumber: 0018F30C9F50BE5181712973
[ 79.013499] SCSI subsystem initialized
[ 79.015328] usb-storage 1-1.4.2:1.0: USB Mass Storage device detected
[ 79.015438] scsi host0: usb-storage 1-1.4.2:1.0
[ 79.015492] usbcore: registered new interface driver usb-storage
[ 79.016658] usbcore: registered new interface driver uas
[ 80.026221] scsi 0:0:0:0: Direct-Access Kingston DT Ultimate G3 PMAP
PQ: 0 ANSI: 6
[ 80.029716] scsi 0:0:0:0: Attached scsi generic sg0 type 0
[ 80.032151] sd 0:0:0:0: [sda] 61407232 512-byte logical blocks: (31.4
GB/29.3 GiB)
[ 80.033068] sd 0:0:0:0: [sda] Write Protect is off
[ 80.033070] sd 0:0:0:0: [sda] Mode Sense: 2b 80 00 08
[ 80.033986] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled,
doesn't support DPO or FUA
[ 80.271640] sda: sda1
[ 80.275055] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 82.061123] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts:
errors=remount-ro. Quota mode: none.
--
You may reply to this email to add a comment.
You are receiving this mail because:
You are watching the assignee of the bug.
next prev parent reply other threads:[~2022-01-01 18:46 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-07-24 13:41 [Bug 213839] New: XHCI 7 port usb hub does not work correctly bugzilla-daemon
2021-07-24 14:30 ` [Bug 213839] " bugzilla-daemon
2021-07-24 14:45 ` bugzilla-daemon
2021-07-24 15:45 ` bugzilla-daemon
2021-09-15 22:46 ` bugzilla-daemon
2021-12-30 14:30 ` bugzilla-daemon
2021-12-31 16:32 ` bugzilla-daemon
2021-12-31 16:32 ` bugzilla-daemon
2021-12-31 16:35 ` bugzilla-daemon
2022-01-01 1:49 ` bugzilla-daemon
2022-01-01 10:36 ` bugzilla-daemon
2022-01-01 10:37 ` bugzilla-daemon
2022-01-01 10:38 ` bugzilla-daemon
2022-01-01 10:39 ` bugzilla-daemon
2022-01-01 16:26 ` bugzilla-daemon
2022-01-01 18:46 ` bugzilla-daemon [this message]
2022-01-01 18:51 ` bugzilla-daemon
2022-01-01 19:53 ` bugzilla-daemon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=bug-213839-208809-Q3PvjMM1XS@https.bugzilla.kernel.org/ \
--to=bugzilla-daemon@bugzilla.kernel.org \
--cc=linux-usb@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).