linux-usb.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: bugzilla-daemon@kernel.org
To: linux-usb@vger.kernel.org
Subject: [Bug 215906] New: DMAR fault when connected usb hub (xhci_hcd)
Date: Wed, 27 Apr 2022 20:21:03 +0000	[thread overview]
Message-ID: <bug-215906-208809@https.bugzilla.kernel.org/> (raw)

https://bugzilla.kernel.org/show_bug.cgi?id=215906

            Bug ID: 215906
           Summary: DMAR fault when connected usb hub (xhci_hcd)
           Product: Drivers
           Version: 2.5
    Kernel Version: Tested on 5.15.0-27,  5.17.0-051700-generic (from
                    https://kernel.ubuntu.com/~kernel-ppa/mainline/v5.17/)
          Hardware: x86-64
                OS: Linux
              Tree: Mainline
            Status: NEW
          Severity: normal
          Priority: P1
         Component: USB
          Assignee: drivers_usb@kernel-bugs.kernel.org
          Reporter: qba100@gmail.com
        Regression: Yes

Since kernel 5.15 (with kernel 5.13 I see no problem) I have a problem with my
USB hub. The device stops working shortly after starting the system.
In dmesg log I see DMAR fault on usb controller


[kwi27 22:03] usb 5-1.2: new high-speed USB device number 3 using xhci_hcd
[  +0,100440] usb 5-1.2: New USB device found, idVendor=1a40, idProduct=0101,
bcdDevice= 1.11
[  +0,000004] usb 5-1.2: New USB device strings: Mfr=0, Product=1,
SerialNumber=0
[  +0,000002] usb 5-1.2: Product: USB 2.0 Hub
[  +0,001002] hub 5-1.2:1.0: USB hub found
[  +0,000133] hub 5-1.2:1.0: 4 ports detected
[  +0,702453] usb 5-1.2.2: new full-speed USB device number 4 using xhci_hcd
[  +0,471198] usb 5-1.2.2: New USB device found, idVendor=047f, idProduct=c025,
bcdDevice= 1.35
[  +0,000004] usb 5-1.2.2: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[  +0,000002] usb 5-1.2.2: Product: Plantronics C320-M
[  +0,000001] usb 5-1.2.2: Manufacturer: Plantronics
[  +0,000001] usb 5-1.2.2: SerialNumber: B13D8BE491B04E73AEB4C95E162DBE2B
[  +0,255862] mc: Linux media interface: v0.10
[  +0,001057] input: Plantronics Plantronics C320-M as
/devices/pci0000:00/0000:00:1c.5/0000:04:00.0/usb5/5-1/5-1.2/5-1.2.2/5-1.2.2:1.3/0003:047F:C025.0004/input/input21
[  +0,060275] plantronics 0003:047F:C025.0004: input,hiddev1,hidraw3: USB HID
v1.11 Device [Plantronics Plantronics C320-M] on usb-0000:04:00.0-1.2.2/input3
[  +0,859655] usb 5-1.2.2: Warning! Unlikely big volume range (=8192),
cval->res is probably wrong.
[  +0,000003] usb 5-1.2.2: [11] FU [Sidetone Playback Volume] ch = 1, val =
0/8192/1
[  +0,584234] usbcore: registered new interface driver snd-usb-audio
[  +0,229229] xhci_hcd 0000:04:00.0: WARNING: Host System Error
[  +0,000014] DMAR: DRHD: handling fault status reg 2
[  +0,000004] DMAR: [DMA Read NO_PASID] Request device [04:00.0] fault addr
0xfffca000 [fault reason 0x06] PTE Read access is not set
[  +0,031993] xhci_hcd 0000:04:00.0: Host halt failed, -110
[kwi27 22:04] xhci_hcd 0000:04:00.0: xHCI host not responding to stop endpoint
command.
[  +0,000003] xhci_hcd 0000:04:00.0: USBSTS: HSE EINT
[  +0,032011] xhci_hcd 0000:04:00.0: Host halt failed, -110
[  +0,000002] xhci_hcd 0000:04:00.0: xHCI host controller not responding,
assume dead
[  +0,000017] xhci_hcd 0000:04:00.0: HC died; cleaning up
[  +0,000042] usb 5-1: USB disconnect, device number 2
[  +0,000003] usb 5-1.2: USB disconnect, device number 3
[  +0,000002] usb 5-1.2.2: USB disconnect, device number 4
[  +0,000114] usb 5-1.2.2: 1:0: usb_set_interface failed (-110)
[  +0,000016] usb 5-1.2.2: 1:1: usb_set_interface failed (-19)
[  +0,000011] usb 5-1.2.2: 1:0: usb_set_interface failed (-19)

04:00.0 USB controller: VIA Technologies, Inc. VL805/806 xHCI USB 3.0
Controller (rev 01) (prog-if 30 [XHCI])
        Subsystem: Micro-Star International Co., Ltd. [MSI] VL805/806 xHCI USB
3.0 Controller
        Flags: bus master, fast devsel, latency 0, IRQ 31, IOMMU group 12
        Memory at f7100000 (64-bit, non-prefetchable) [size=4K]
        Capabilities: <access denied>
        Kernel driver in use: xhci_hcd
        Kernel modules: xhci_pci

-- 
You may reply to this email to add a comment.

You are receiving this mail because:
You are watching the assignee of the bug.

             reply	other threads:[~2022-04-27 20:21 UTC|newest]

Thread overview: 31+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-04-27 20:21 bugzilla-daemon [this message]
2022-05-01 12:32 ` [Bug 215906] DMAR fault when connected usb hub (xhci_hcd) bugzilla-daemon
2022-05-05  9:40 ` bugzilla-daemon
2022-05-05 12:30 ` bugzilla-daemon
2022-05-06 15:49 ` bugzilla-daemon
2022-05-09  5:42 ` bugzilla-daemon
2022-05-09  8:11 ` bugzilla-daemon
2022-05-09  9:00 ` bugzilla-daemon
2022-06-20  8:40 ` bugzilla-daemon
2023-10-22 19:19 ` bugzilla-daemon
2023-10-25  9:23 ` bugzilla-daemon
2023-10-29 22:39 ` bugzilla-daemon
2023-10-30 16:21 ` bugzilla-daemon
2023-10-30 16:26 ` bugzilla-daemon
2023-10-30 17:18 ` bugzilla-daemon
2023-10-31  9:10 ` bugzilla-daemon
2023-10-31 15:40 ` bugzilla-daemon
2023-11-02 10:59 ` bugzilla-daemon
2023-11-04  8:06 ` bugzilla-daemon
2024-11-01 14:03 ` bugzilla-daemon
2024-12-22 20:49 ` bugzilla-daemon
2024-12-23  9:57 ` bugzilla-daemon
2024-12-23 10:31 ` bugzilla-daemon
2024-12-23 11:02 ` bugzilla-daemon
2024-12-23 12:02 ` bugzilla-daemon
2024-12-23 12:18 ` bugzilla-daemon
2024-12-23 18:14 ` bugzilla-daemon
2024-12-23 18:29 ` bugzilla-daemon
2025-01-24 14:53 ` bugzilla-daemon
2025-03-09 23:12 ` bugzilla-daemon
2025-04-04 21:26 ` bugzilla-daemon

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=bug-215906-208809@https.bugzilla.kernel.org/ \
    --to=bugzilla-daemon@kernel.org \
    --cc=linux-usb@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).