From: bugzilla-daemon@kernel.org
To: linux-usb@vger.kernel.org
Subject: [Bug 218118] New: USB3 port does not work on Chromebook XE303C12 with Linux kernel 6.5.11
Date: Wed, 08 Nov 2023 21:38:40 +0000 [thread overview]
Message-ID: <bug-218118-208809@https.bugzilla.kernel.org/> (raw)
https://bugzilla.kernel.org/show_bug.cgi?id=218118
Bug ID: 218118
Summary: USB3 port does not work on Chromebook XE303C12 with
Linux kernel 6.5.11
Product: Drivers
Version: 2.5
Hardware: ARM
OS: Linux
Status: NEW
Severity: normal
Priority: P3
Component: USB
Assignee: drivers_usb@kernel-bugs.kernel.org
Reporter: quark@disroot.org
Regression: No
With kernel 6.5.11 usb3 does not work at all.
With kernel 6.3.8, the usb3 port works if the device was connected before
powering on the laptop; after reconnecting, the usb3 port stops working.
There are no such problems with Linux kernel 5.15
Linux kernel 6.5.11, dmesg | grep usb:
[ 1.612078] usbcore: registered new interface driver usbfs
[ 1.612102] usbcore: registered new interface driver hub
[ 1.612126] usbcore: registered new device driver usb
[ 1.705362] samsung-usb2-phy 12130000.phy: supply vbus not found, using
dummy regulator
[ 1.705912] exynos5_usb3drd_phy 12100000.phy: supply vbus-boost not found,
using dummy regulator
[ 1.737006] exynos-ehci 12110000.usb: EHCI Host Controller
[ 1.737108] exynos-ehci 12110000.usb: new USB bus registered, assigned bus
number 1
[ 1.737362] exynos-ehci 12110000.usb: irq 130, io mem 0x12110000
[ 1.757630] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00
[ 1.757808] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002,
bcdDevice= 6.05
[ 1.757818] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.757825] usb usb1: Product: EHCI Host Controller
[ 1.757830] usb usb1: Manufacturer: Linux 6.5.11 ehci_hcd
[ 1.757835] usb usb1: SerialNumber: 12110000.usb
[ 1.758868] exynos-ohci 12120000.usb: USB Host Controller
[ 1.758972] exynos-ohci 12120000.usb: new USB bus registered, assigned bus
number 2
[ 1.759045] exynos-ohci 12120000.usb: irq 130, io mem 0x12120000
[ 1.831869] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001,
bcdDevice= 6.05
[ 1.831878] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.831884] usb usb2: Product: USB Host Controller
[ 1.831889] usb usb2: Manufacturer: Linux 6.5.11 ohci_hcd
[ 1.831894] usb usb2: SerialNumber: 12120000.usb
[ 1.832951] usbcore: registered new interface driver cdc_acm
[ 1.832982] usbcore: registered new interface driver usblp
[ 1.833006] usbcore: registered new interface driver cdc_wdm
[ 1.833152] usbcore: registered new interface driver uas
[ 1.833190] usbcore: registered new interface driver usb-storage
[ 1.833211] usbcore: registered new interface driver ums-cypress
[ 1.833232] usbcore: registered new interface driver ums_eneub6250
[ 1.833253] usbcore: registered new interface driver ums-freecom
[ 1.833274] usbcore: registered new interface driver ums-isd200
[ 2.114593] usbcore: registered new interface driver vub300
[ 2.114624] usbcore: registered new interface driver ushc
[ 2.115336] usbcore: registered new interface driver usbhid
[ 2.115344] usbhid: USB HID core driver
[ 2.258696] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002,
bcdDevice= 6.05
[ 2.258705] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 2.258713] usb usb3: Product: xHCI Host Controller
[ 2.258718] usb usb3: Manufacturer: Linux 6.5.11 xhci-hcd
[ 2.258723] usb usb3: SerialNumber: xhci-hcd.7.auto
[ 2.259384] usb usb4: We don't know the algorithms for LPM for this host,
disabling LPM.
[ 2.259514] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003,
bcdDevice= 6.05
[ 2.259522] usb usb4: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 2.259528] usb usb4: Product: xHCI Host Controller
[ 2.259533] usb usb4: Manufacturer: Linux 6.5.11 xhci-hcd
[ 2.259538] usb usb4: SerialNumber: xhci-hcd.7.auto
[ 2.377724] usb 2-1: new low-speed USB device number 2 using exynos-ohci
[ 2.668653] usb 2-1: New USB device found, idVendor=0458, idProduct=003a,
bcdDevice= 1.00
[ 2.668667] usb 2-1: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 2.668674] usb 2-1: Product: USB Optical Mouse
[ 2.668679] usb 2-1: Manufacturer: Genius
[ 2.675394] input: Genius USB Optical Mouse as
/devices/platform/soc/12120000.usb/usb2/2-1/2-1:1.0/0003:0458:003A.0001/input/input3
[ 2.675572] hid-generic 0003:0458:003A.0001: input,hidraw0: USB HID v1.11
Mouse [Genius USB Optical Mouse] on usb-12120000.usb-1/input0
[ 4.398510] usb usb3-port1: attempt power cycle
[ 6.428387] usb usb3-port1: unable to enumerate USB device
Linux kernel 6.3.8, dmesg | grep usb:
[ 1.591836] usbcore: registered new interface driver usbfs
[ 1.591856] usbcore: registered new interface driver hub
[ 1.591877] usbcore: registered new device driver usb
[ 1.658666] samsung-usb2-phy 12130000.phy: supply vbus not found, using
dummy regulator
[ 1.659101] exynos5_usb3drd_phy 12100000.phy: supply vbus-boost not found,
using dummy regulator
[ 1.701360] exynos-ehci 12110000.usb: EHCI Host Controller
[ 1.701451] exynos-ehci 12110000.usb: new USB bus registered, assigned bus
number 1
[ 1.701604] exynos-ehci 12110000.usb: irq 131, io mem 0x12110000
[ 1.726696] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00
[ 1.726898] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002,
bcdDevice= 6.03
[ 1.726907] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.726914] usb usb1: Product: EHCI Host Controller
[ 1.726919] usb usb1: Manufacturer: Linux 6.3.8 ehci_hcd
[ 1.726924] usb usb1: SerialNumber: 12110000.usb
[ 1.727933] exynos-ohci 12120000.usb: USB Host Controller
[ 1.728028] exynos-ohci 12120000.usb: new USB bus registered, assigned bus
number 2
[ 1.728098] exynos-ohci 12120000.usb: irq 131, io mem 0x12120000
[ 1.800917] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001,
bcdDevice= 6.03
[ 1.800926] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.800932] usb usb2: Product: USB Host Controller
[ 1.800937] usb usb2: Manufacturer: Linux 6.3.8 ohci_hcd
[ 1.800942] usb usb2: SerialNumber: 12120000.usb
[ 1.802519] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002,
bcdDevice= 6.03
[ 1.802528] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.802534] usb usb3: Product: xHCI Host Controller
[ 1.802539] usb usb3: Manufacturer: Linux 6.3.8 xhci-hcd
[ 1.802543] usb usb3: SerialNumber: xhci-hcd.1.auto
[ 1.803101] usb usb4: We don't know the algorithms for LPM for this host,
disabling LPM.
[ 1.803232] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003,
bcdDevice= 6.03
[ 1.803240] usb usb4: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.803245] usb usb4: Product: xHCI Host Controller
[ 1.803250] usb usb4: Manufacturer: Linux 6.3.8 xhci-hcd
[ 1.803255] usb usb4: SerialNumber: xhci-hcd.1.auto
[ 1.803794] usbcore: registered new interface driver cdc_acm
[ 1.803825] usbcore: registered new interface driver usblp
[ 1.803845] usbcore: registered new interface driver cdc_wdm
[ 1.803993] usbcore: registered new interface driver uas
[ 1.804037] usbcore: registered new interface driver usb-storage
[ 1.804057] usbcore: registered new interface driver ums-cypress
[ 1.804076] usbcore: registered new interface driver ums_eneub6250
[ 1.804094] usbcore: registered new interface driver ums-freecom
[ 1.804112] usbcore: registered new interface driver ums-isd200
[ 2.086726] usb 3-1: new high-speed USB device number 2 using xhci-hcd
[ 2.095970] usbcore: registered new interface driver vub300
[ 2.096002] usbcore: registered new interface driver ushc
[ 2.096477] usbcore: registered new interface driver usbhid
[ 2.096483] usbhid: USB HID core driver
[ 2.278519] usb 3-1: New USB device found, idVendor=090c, idProduct=1000,
bcdDevice=11.00
[ 2.278531] usb 3-1: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 2.278537] usb 3-1: Product: Silicon-Power4G
[ 2.278542] usb 3-1: Manufacturer: UFD 2.0
[ 2.278548] usb 3-1: SerialNumber: 11111111111111
[ 2.279485] usb-storage 3-1:1.0: USB Mass Storage device detected
[ 2.279934] scsi host0: usb-storage 3-1:1.0
[ 2.346703] usb 2-1: new low-speed USB device number 2 using exynos-ohci
[ 2.617740] usb 2-1: New USB device found, idVendor=0458, idProduct=003a,
bcdDevice= 1.00
[ 2.617755] usb 2-1: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 2.617762] usb 2-1: Product: USB Optical Mouse
[ 2.617767] usb 2-1: Manufacturer: Genius
[ 2.624432] input: Genius USB Optical Mouse as
/devices/platform/soc/12120000.usb/usb2/2-1/2-1:1.0/0003:0458:003A.0001/input/input3
[ 2.625043] hid-generic 0003:0458:003A.0001: input,hidraw0: USB HID v1.11
Mouse [Genius USB Optical Mouse] on usb-12120000.usb-1/input0
[ 67.531278] usb 3-1: USB disconnect, device number 2
[ 71.667630] usb usb3-port1: connect-debounce failed
--
You may reply to this email to add a comment.
You are receiving this mail because:
You are watching the assignee of the bug.
next reply other threads:[~2023-11-08 21:38 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-11-08 21:38 bugzilla-daemon [this message]
2023-11-09 14:52 ` [Bug 218118] USB3 port does not work on Chromebook XE303C12 with Linux kernel 6.5.11 bugzilla-daemon
2023-11-09 19:06 ` bugzilla-daemon
2023-11-09 19:07 ` bugzilla-daemon
2023-11-09 19:10 ` bugzilla-daemon
2023-11-10 9:24 ` bugzilla-daemon
2023-11-10 9:26 ` bugzilla-daemon
2023-11-10 9:27 ` bugzilla-daemon
2023-11-10 14:37 ` bugzilla-daemon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=bug-218118-208809@https.bugzilla.kernel.org/ \
--to=bugzilla-daemon@kernel.org \
--cc=linux-usb@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox