[Bug 220027] USB 3.2 capture cards using incorrect USB speed

[bugzilla-daemon@kernel.org]

https://bugzilla.kernel.org/show_bug.cgi?id=220027

--- Comment #1 from Niko (nrkowalski@gmail.com) ---
I decided to try the 6.14.0-15 Kernel and I'm still having the same issue, but
getting some more information from dmesg.

[  847.836967] usb 8-1: new SuperSpeed Plus Gen 2x1 USB device number 3 using
xhci_hcd
[  853.084344] usb 8-1: unable to get BOS descriptor or descriptor too short
[  853.110389] usb 8-1: unable to read config index 0 descriptor/start: -71
[  853.110406] usb 8-1: can't read configurations, error -71
[  853.293248] usb 8-1: new SuperSpeed USB device number 4 using xhci_hcd
[  853.372723] usb 8-1: LPM exit latency is zeroed, disabling LPM.
[  853.624234] usb 8-1: New USB device found, idVendor=0fd9, idProduct=009c,
bcdDevice= 0.02
[  853.624252] usb 8-1: New USB device strings: Mfr=6, Product=7,
SerialNumber=3
[  853.624259] usb 8-1: Product: Elgato 4K X
[  853.624265] usb 8-1: Manufacturer: Elgato
[  853.624271] usb 8-1: SerialNumber: A7SNB504228NRE
[  853.690719] uvcvideo 8-1:1.1: Unknown video format
30313050-0000-0010-8000-00aa00389b71
[  853.690749] usb 8-1: Found UVC 1.00 device Elgato 4K X (0fd9:009c)
[  853.856379] usb 8-1: 3:2: failed to get current value for ch 0 (-22)
[  854.820221] retire_capture_urb: 15 callbacks suppressed
[  854.836455] usb 8-1: cannot submit urb (err = -19)
[  854.837512] usb 8-1: cannot submit urb 0, error -19: no device
[  855.165030] usb 8-1: reset SuperSpeed USB device number 4 using xhci_hcd
[  855.236908] usb 8-1: LPM exit latency is zeroed, disabling LPM.
[  855.322103] uvcvideo 8-1:1.1: Unknown video format
30313050-0000-0010-8000-00aa00389b71
[  855.322126] usb 8-1: Found UVC 1.00 device Elgato 4K X (0fd9:009c)
[  855.407009] usb 8-1: 3:2: failed to get current value for ch 0 (-22)

-- 
You may reply to this email to add a comment.

You are receiving this mail because:
You are watching the assignee of the bug.