[Bug 220238] Blue Yeti microphone doesn't consistently work after unplugging and plugging back in or reboot.

[bugzilla-daemon@kernel.org]

https://bugzilla.kernel.org/show_bug.cgi?id=220238

--- Comment #9 from Ryan Walker (fewspotty@protonmail.com) ---
(In reply to oneukum from comment #7)
> On 23.06.25 12:03, bugzilla-daemon@kernel.org wrote:
> > https://bugzilla.kernel.org/show_bug.cgi?id=220238
> > 
> > --- Comment #6 from Ryan Walker (fewspotty@protonmail.com) ---
> > (In reply to Oliver Neukum from comment #3)
> >> It is good that you have found a work around. But you were right. This is
> >> supposed to work.
> >>
> >> Could you please post dmesg of working and non-working cases?
> > 
> > I emailed you the working state to you directly because it had a MAC
> address
> > in
> > it.
> > 
> 
> Hi,
> 
> are you referring to SerialNumber?
> You could set it to XXX and indicate that you've done so for privacy reasons
> in the public report.
> 
>       Regards
>               Oliver




dmesg without the USB-A hub. The Blue Yeti mic is plugged directly into a USB-A
port and I unplugged and replugged a few times until it worked. It never works
the first time I plug it in directly. It always takes 3 or more tries plugging
it in.


sudo dmesg[ 4759.516762] usb 1-8: 6:0: failed to get current value for ch 0
(-110)
[ 4763.088699] usb 1-8: 6:0: cannot get min/max values for control 2 (id 6)
[ 4763.108700] usb 1-8: 5:0: failed to get current value for ch 0 (-22)
[ 4763.148698] usb 1-8: 5:0: cannot get min/max values for control 2 (id 5)
[ 4763.149851] usbhid 1-8:1.3: can't add hid device: -71
[ 4763.149919] usbhid 1-8:1.3: probe with driver usbhid failed with error -71
[ 4763.149966] usb 1-8: USB disconnect, device number 50
[ 4765.038713] usb 1-8: new full-speed USB device number 51 using xhci_hcd
[ 4765.163423] usb 1-8: New USB device found, idVendor=046d, idProduct=0ab1,
bcdDevice= 4.0a
[ 4765.163436] usb 1-8: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 4765.163439] usb 1-8: Product: Yeti Nano
[ 4765.163442] usb 1-8: Manufacturer: Blue Microphones
[ 4765.163445] usb 1-8: SerialNumber: 8832D12120041006
[ 4767.856621] usb 1-8: 1:1: cannot set freq 48000 to ep 0x1
[ 4767.859615] usb 1-8: 2:1: cannot set freq 48000 to ep 0x82
[ 4767.879616] usb 1-8: 6:0: failed to get current value for ch 0 (-22)
[ 4767.919637] usb 1-8: 6:0: cannot get min/max values for control 2 (id 6)
[ 4767.939614] usb 1-8: 5:0: failed to get current value for ch 0 (-22)
[ 4767.979614] usb 1-8: 5:0: cannot get min/max values for control 2 (id 5)
[ 4767.980733] usbhid 1-8:1.3: can't add hid device: -71
[ 4767.980848] usbhid 1-8:1.3: probe with driver usbhid failed with error -71
[ 4767.981031] usb 1-8: USB disconnect, device number 51
[ 4769.045676] usb 1-8: new full-speed USB device number 52 using xhci_hcd
[ 4769.170532] usb 1-8: New USB device found, idVendor=046d, idProduct=0ab1,
bcdDevice= 4.0a
[ 4769.170542] usb 1-8: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 4769.170544] usb 1-8: Product: Yeti Nano
[ 4769.170547] usb 1-8: Manufacturer: Blue Microphones
[ 4769.170549] usb 1-8: SerialNumber: 8832D12120041006
[ 4770.241646] usb 1-8: 1:1: cannot set freq 48000 to ep 0x1
[ 4770.245590] usb 1-8: 2:1: cannot set freq 48000 to ep 0x82
[ 4770.265595] usb 1-8: 6:0: failed to get current value for ch 0 (-22)
[ 4770.305574] usb 1-8: 6:0: cannot get min/max values for control 2 (id 6)
[ 4770.325584] usb 1-8: 5:0: failed to get current value for ch 0 (-22)
[ 4770.365572] usb 1-8: 5:0: cannot get min/max values for control 2 (id 5)
[ 4770.366662] usbhid 1-8:1.3: can't add hid device: -71
[ 4770.366710] usbhid 1-8:1.3: probe with driver usbhid failed with error -71
[ 4770.366763] usb 1-8: USB disconnect, device number 52
[ 4780.470461] usb 1-8: new full-speed USB device number 53 using xhci_hcd
[ 4780.595225] usb 1-8: New USB device found, idVendor=046d, idProduct=0ab1,
bcdDevice= 4.0a
[ 4780.595240] usb 1-8: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 4780.595245] usb 1-8: Product: Yeti Nano
[ 4780.595249] usb 1-8: Manufacturer: Blue Microphones
[ 4780.595253] usb 1-8: SerialNumber: 8832D12120041006
[ 4782.501428] usb 1-8: 1:1: cannot set freq 48000 to ep 0x1
[ 4782.504377] usb 1-8: 2:1: cannot set freq 48000 to ep 0x82
[ 4782.524372] usb 1-8: 6:0: failed to get current value for ch 0 (-22)
[ 4782.564364] usb 1-8: 6:0: cannot get min/max values for control 2 (id 6)
[ 4782.584473] usb 1-8: 5:0: failed to get current value for ch 0 (-22)
[ 4782.624438] usb 1-8: 5:0: cannot get min/max values for control 2 (id 5)
[ 4782.625659] usbhid 1-8:1.3: can't add hid device: -71
[ 4782.625709] usbhid 1-8:1.3: probe with driver usbhid failed with error -71
[ 4782.625746] usb 1-8: USB disconnect, device number 53
[ 4783.217486] usb 1-8: new full-speed USB device number 54 using xhci_hcd
[ 4783.342170] usb 1-8: New USB device found, idVendor=046d, idProduct=0ab1,
bcdDevice= 4.0a
[ 4783.342185] usb 1-8: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 4783.342190] usb 1-8: Product: Yeti Nano
[ 4783.342194] usb 1-8: Manufacturer: Blue Microphones
[ 4783.342198] usb 1-8: SerialNumber: 8832D12120041006
[ 4783.988415] usb 1-8: 1:1: cannot set freq 48000 to ep 0x1
[ 4783.992172] usb 1-8: 2:1: cannot set freq 48000 to ep 0x82
[ 4784.012333] usb 1-8: 6:0: failed to get current value for ch 0 (-22)
[ 4784.054333] usb 1-8: 6:0: cannot get min/max values for control 2 (id 6)
[ 4784.074333] usb 1-8: 5:0: failed to get current value for ch 0 (-22)
[ 4784.114332] usb 1-8: 5:0: cannot get min/max values for control 2 (id 5)
[ 4784.115555] usbhid 1-8:1.3: can't add hid device: -71
[ 4784.115605] usbhid 1-8:1.3: probe with driver usbhid failed with error -71
[ 4784.115643] usb 1-8: USB disconnect, device number 54
[ 4784.627368] usb 1-8: new full-speed USB device number 55 using xhci_hcd
[ 4784.752357] usb 1-8: New USB device found, idVendor=046d, idProduct=0ab1,
bcdDevice= 4.0a
[ 4784.752375] usb 1-8: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 4784.752384] usb 1-8: Product: Yeti Nano
[ 4784.752391] usb 1-8: Manufacturer: Blue Microphones
[ 4784.752397] usb 1-8: SerialNumber: 8832D12120041006
[ 4785.516321] usb 1-8: 1:1: cannot set freq 48000 to ep 0x1
[ 4785.519319] usb 1-8: 2:1: cannot set freq 48000 to ep 0x82
[ 4785.539308] usb 1-8: 6:0: failed to get current value for ch 0 (-22)
[ 4785.578316] usb 1-8: 6:0: cannot get min/max values for control 2 (id 6)
[ 4785.598424] usb 1-8: 5:0: failed to get current value for ch 0 (-22)
[ 4785.638307] usb 1-8: 5:0: cannot get min/max values for control 2 (id 5)
[ 4785.639440] usbhid 1-8:1.3: can't add hid device: -71
[ 4785.639455] usbhid 1-8:1.3: probe with driver usbhid failed with error -71
[ 4785.639499] usb 1-8: USB disconnect, device number 55
[ 4786.080400] usb 1-8: new full-speed USB device number 56 using xhci_hcd
[ 4786.205344] usb 1-8: New USB device found, idVendor=046d, idProduct=0ab1,
bcdDevice= 4.0a
[ 4786.205359] usb 1-8: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 4786.205363] usb 1-8: Product: Yeti Nano
[ 4786.205367] usb 1-8: Manufacturer: Blue Microphones
[ 4786.205371] usb 1-8: SerialNumber: 8832D12120041006
[ 4786.302696] input: Blue Microphones Yeti Nano Consumer Control as
/devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.3/0003:046D:0AB1.0021/input/input122
[ 4786.354610] input: Blue Microphones Yeti Nano as
/devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.3/0003:046D:0AB1.0021/input/input123
[ 4786.354802] hid-generic 0003:046D:0AB1.0021: input,hiddev99,hidraw8: USB HID
v1.11 Device [Blue Microphones Yeti Nano] on usb-0000:00:14.0-8/input3

~

-- 
You may reply to this email to add a comment.

You are receiving this mail because:
You are watching the assignee of the bug.