From: bugzilla-daemon@kernel.org
To: linux-usb@vger.kernel.org
Subject: [Bug 221103] xhci_hcd: System lockup under CPU load during usbfs polling of USB devices on AMD platforms
Date: Sat, 21 Feb 2026 01:12:33 +0000 [thread overview]
Message-ID: <bug-221103-208809-jPG8NfJmzC@https.bugzilla.kernel.org/> (raw)
In-Reply-To: <bug-221103-208809@https.bugzilla.kernel.org/>
https://bugzilla.kernel.org/show_bug.cgi?id=221103
--- Comment #15 from Paul Alesius (paul@unnservice.com) ---
(In reply to Alan Stern from comment #14)
> Have you tried disabling runtime PM? Run any of the test scenarios after
> booting with "usbcore.autosuspend=-1" on the boot command line.
Disabling runtime PM for USB has eliminated the freeze, tested with hammering
all devices too for 40 minutes.
---- Other logs:
With runtime PM enabled, I see this in dmesg on every boot:
[ 17.918387] xhci_hcd 0000:78:00.0: WARN: xHC CMD_RUN timeout
[ 17.918508] xhci_hcd 0000:78:00.0: PM: suspend_common(): xhci_pci_suspend
returns -110
[ 17.918586] xhci_hcd 0000:78:00.0: can't suspend (hcd_pci_runtime_suspend
returned -110)
But 0000:78:00.0 is a different controller than the root hub that triggers the
freeze. Here's lsusb with controller information:
0000:0e:00.0 Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
0000:0e:00.0 Bus 001 Device 002: ID 13d3:3588 IMC Networks Wireless_Device
(Internal)
0000:0e:00.0 Bus 001 Device 003: ID 0b05:19af ASUSTek Computer, Inc. AURA LED
Controller (Internal)
0000:0e:00.0 Bus 001 Device 004: ID 046d:c548 Logitech, Inc. Logi Bolt Receiver
(Plugged in)
0000:0e:00.0 Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
0000:10:00.0 Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
0000:10:00.0 Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
0000:78:00.0 Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
(xhci_pci_suspend -110)
0000:78:00.0 Bus 006 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
(xhci_pci_suspend -110)
0000:7a:00.3 Bus 007 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
0000:7a:00.3 Bus 008 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
0000:7a:00.4 Bus 009 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
0000:7a:00.4 Bus 010 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
(Triggers freeze with runtime PM)
0000:7b:00.0 Bus 011 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
--
You may reply to this email to add a comment.
You are receiving this mail because:
You are watching the assignee of the bug.
next prev parent reply other threads:[~2026-02-21 1:12 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-02-18 14:52 [Bug 221103] New: xhci_hcd: System lockup under CPU load during rapid usbfs polling of SuperSpeed root hubs on AMD Ryzen platforms bugzilla-daemon
2026-02-20 7:30 ` [Bug 221103] xhci_hcd: System lockup under CPU load during usbfs polling of USB devices on AMD platforms bugzilla-daemon
2026-02-20 8:31 ` bugzilla-daemon
2026-02-20 9:17 ` Greg KH
2026-02-20 9:16 ` bugzilla-daemon
2026-02-20 9:17 ` bugzilla-daemon
2026-02-20 9:24 ` bugzilla-daemon
2026-02-20 9:26 ` bugzilla-daemon
2026-02-20 9:28 ` bugzilla-daemon
2026-02-20 9:40 ` bugzilla-daemon
2026-02-20 10:07 ` bugzilla-daemon
2026-02-20 10:17 ` Greg KH
2026-02-20 10:17 ` bugzilla-daemon
2026-02-20 10:21 ` bugzilla-daemon
2026-02-20 11:19 ` bugzilla-daemon
2026-02-20 14:07 ` bugzilla-daemon
2026-02-20 17:18 ` bugzilla-daemon
2026-02-21 1:12 ` bugzilla-daemon [this message]
2026-02-23 13:05 ` bugzilla-daemon
2026-02-23 17:52 ` bugzilla-daemon
2026-02-23 22:33 ` bugzilla-daemon
2026-02-24 7:45 ` bugzilla-daemon
2026-02-24 8:52 ` bugzilla-daemon
2026-02-24 10:19 ` bugzilla-daemon
2026-02-24 12:03 ` bugzilla-daemon
2026-02-24 12:21 ` bugzilla-daemon
2026-02-24 15:42 ` bugzilla-daemon
2026-03-08 17:56 ` bugzilla-daemon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=bug-221103-208809-jPG8NfJmzC@https.bugzilla.kernel.org/ \
--to=bugzilla-daemon@kernel.org \
--cc=linux-usb@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox