From: Ravi Gunasekaran <r-gunasekaran@ti.com>
To: Peter Chen <peter.chen@kernel.org>
Cc: <pawell@cadence.com>, <rogerq@kernel.org>,
<gregkh@linuxfoundation.org>, <linux-usb@vger.kernel.org>,
<linux-kernel@vger.kernel.org>,
Ravi Gunasekaran <r-gunasekaran@ti.com>
Subject: Re: [PATCH 1/2] usb: cdns3: Add quirk flag to enable suspend residency
Date: Wed, 15 May 2024 09:52:57 +0530 [thread overview]
Message-ID: <dde63edb-9057-2d33-032a-8ee25e981c72@ti.com> (raw)
In-Reply-To: <20240515013838.GA3279984@nchen-desktop>
On 5/15/24 7:08 AM, Peter Chen wrote:
> On 24-05-14 14:54:20, Ravi Gunasekaran wrote:
>> From: Roger Quadros <rogerq@kernel.org>
>>
>> Some platforms (e.g. ti,j721e-usb, ti,am64-usb) require
>> this bit to be set to workaround a lockup issue with PHY
>> short suspend intervals [1]. Add a platform quirk flag
>> to indicate if Suspend Residency should be enabled.
>>
>> [1] - https://www.ti.com/lit/er/sprz457h/sprz457h.pdf
>> i2409 - USB: USB2 PHY locks up due to short suspend
>>
>> Signed-off-by: Roger Quadros <rogerq@kernel.org>
>> Signed-off-by: Ravi Gunasekaran <r-gunasekaran@ti.com>
>> ---
[...]
>> regs = devm_ioremap_resource(cdns->dev, &cdns->otg_res);
>> @@ -439,6 +439,13 @@ int cdns_drd_init(struct cdns *cdns)
>> return -EINVAL;
>> }
>>
>> + if (cdns->pdata &&
>> + (cdns->pdata->quirks & CDNS3_DRD_SUSPEND_RESIDENCY_ENABLE)) {
>> + reg = readl(&cdns->otg_v1_regs->susp_ctrl);
>> + reg |= SUSP_CTRL_SUSPEND_RESIDENCY_ENABLE;
>> + writel(reg, &cdns->otg_v1_regs->susp_ctrl);
>> + }
>> +
>
> It is better put this above (just above code cdns->version =
> CDNS3_CONTROLLER_V1;)
>
You mean here, to group it with CDNS3 v1?
else if (OTG_CDNS3_CHECK_DID(state)) {
cdns->otg_irq_regs = (struct cdns_otg_irq_regs __iomem *)
&cdns->otg_v1_regs->ien;
writel(1, &cdns->otg_v1_regs->simulate);
+ if (cdns->pdata &&
+ (cdns->pdata->quirks & CDNS3_DRD_SUSPEND_RESIDENCY_ENABLE)) {
+ reg = readl(&cdns->otg_v1_regs->susp_ctrl);
+ reg |= SUSP_CTRL_SUSPEND_RESIDENCY_ENABLE;
+ writel(reg, &cdns->otg_v1_regs->susp_ctrl);
+ }
dns->version = CDNS3_CONTROLLER_V1;
} else
> Peter
>> dev_dbg(cdns->dev, "DRD version v1 (ID: %08x, rev: %08x)\n",
>> readl(&cdns->otg_v1_regs->did),
>> readl(&cdns->otg_v1_regs->rid));
>> diff --git a/drivers/usb/cdns3/drd.h b/drivers/usb/cdns3/drd.h
>> index d72370c321d3..1e2aee14d629 100644
>> --- a/drivers/usb/cdns3/drd.h
>> +++ b/drivers/usb/cdns3/drd.h
>> @@ -193,6 +193,9 @@ struct cdns_otg_irq_regs {
>> /* OTGREFCLK - bitmasks */
>> #define OTGREFCLK_STB_CLK_SWITCH_EN BIT(31)
>>
>> +/* SUPS_CTRL - bitmasks */
>> +#define SUSP_CTRL_SUSPEND_RESIDENCY_ENABLE BIT(17)
>> +
>> /* OVERRIDE - bitmasks */
>> #define OVERRIDE_IDPULLUP BIT(0)
>> /* Only for CDNS3_CONTROLLER_V0 version */
>> --
>> 2.17.1
>>
>
--
Regards,
Ravi
next prev parent reply other threads:[~2024-05-15 4:23 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-05-14 9:24 [PATCH 0/2] TI AM64/J7: USB Errata i2409 workaround Ravi Gunasekaran
2024-05-14 9:24 ` [PATCH 1/2] usb: cdns3: Add quirk flag to enable suspend residency Ravi Gunasekaran
2024-05-15 1:38 ` Peter Chen
2024-05-15 4:22 ` Ravi Gunasekaran [this message]
2024-05-16 1:39 ` Peter Chen
2024-05-14 9:24 ` [PATCH 2/2] usb: cdns3-ti: Add workaround for Errata i2409 Ravi Gunasekaran
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=dde63edb-9057-2d33-032a-8ee25e981c72@ti.com \
--to=r-gunasekaran@ti.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=pawell@cadence.com \
--cc=peter.chen@kernel.org \
--cc=rogerq@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox