Re: [PATCH v14 1/4] usb: Add support for Intel LJCA device

[Hans de Goede <hdegoede@redhat.com>]

Hi,

On 9/4/23 07:44, Wentong Wu wrote:
> Implements the USB part of Intel USB-I2C/GPIO/SPI adapter device
> named "La Jolla Cove Adapter" (LJCA).
> 
> The communication between the various LJCA module drivers and the
> hardware will be muxed/demuxed by this driver. Three modules (
> I2C, GPIO, and SPI) are supported currently.
> 
> Each sub-module of LJCA device is identified by type field within
> the LJCA message header.
> 
> The sub-modules of LJCA can use ljca_transfer() to issue a transfer
> between host and hardware. And ljca_register_event_cb is exported
> to LJCA sub-module drivers for hardware event subscription.
> 
> The minimum code in ASL that covers this board is
> Scope (\_SB.PCI0.DWC3.RHUB.HS01)
>     {
>         Device (GPIO)
>         {
>             Name (_ADR, Zero)
>             Name (_STA, 0x0F)
>         }
> 
>         Device (I2C)
>         {
>             Name (_ADR, One)
>             Name (_STA, 0x0F)
>         }
> 
>         Device (SPI)
>         {
>             Name (_ADR, 0x02)
>             Name (_STA, 0x0F)
>         }
>     }
> 
> Signed-off-by: Wentong Wu <wentong.wu@intel.com>
> Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
> Tested-by: Hans de Goede <hdegoede@redhat.com>
> ---

<snip>

> +#ifdef CONFIG_ACPI
> +struct ljca_match_ids_walk_data {
> +	const struct acpi_device_id *ids;
> +	const char *uid;
> +	struct acpi_device *adev;
> +};
> +
> +static const struct acpi_device_id ljca_gpio_hids[] = {
> +	{ "INTC1074" },
> +	{ "INTC1096" },
> +	{ "INTC100B" },
> +	{ "INTC10D1" },
> +	{},
> +};
> +
> +static const struct acpi_device_id ljca_i2c_hids[] = {
> +	{ "INTC1075" },
> +	{ "INTC1097" },
> +	{ "INTC100C" },
> +	{ "INTC10D2" },
> +	{},
> +};
> +
> +static const struct acpi_device_id ljca_spi_hids[] = {
> +	{ "INTC1091" },
> +	{ "INTC1098" },
> +	{ "INTC100D" },
> +	{ "INTC10D3" },
> +	{},
> +};
> +
> +static int ljca_match_device_ids(struct acpi_device *adev, void *data)
> +{
> +	struct ljca_match_ids_walk_data *wd = data;
> +	const char *uid = acpi_device_uid(adev);
> +
> +	if (acpi_match_device_ids(adev, wd->ids))
> +		return 0;
> +
> +	if (!wd->uid)
> +		goto match;
> +
> +	if (!uid)
> +		uid = "0";
> +	else
> +		uid = memchr(uid, wd->uid[0], strlen(uid));

Note this line can be simplified to:

		uid = strchr(uid, wd->uid[0]);

Regards,

Hans