Re: [PATCH 4/4] usb: typec: intel_pmc_mux: Configure Displayport Alternate mode 2.1

[Sergey Shtylyov <s.shtylyov@omp.ru>]

Hello!

On 8/12/23 12:07 AM, Utkarsh Patel wrote:

> Mux agent driver can configure cable details such as cable type and
> cable speed received as a part of displayport configuration to support
> Displayport Alternate mode 2.1.
> 
> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>

   Hm, I think the R-b tags should follow your signoff...

> Signed-off-by: Utkarsh Patel <utkarsh.h.patel@intel.com>
> ---
>  drivers/usb/typec/mux/intel_pmc_mux.c | 24 ++++++++++++++++++++++++
>  1 file changed, 24 insertions(+)
> 
> diff --git a/drivers/usb/typec/mux/intel_pmc_mux.c b/drivers/usb/typec/mux/intel_pmc_mux.c
> index 888632847a74..218f6e25518d 100644
> --- a/drivers/usb/typec/mux/intel_pmc_mux.c
> +++ b/drivers/usb/typec/mux/intel_pmc_mux.c
[...]
> @@ -282,6 +288,24 @@ pmc_usb_mux_dp(struct pmc_usb_port *port, struct typec_mux_state *state)
>  	req.mode_data |= (state->mode - TYPEC_STATE_MODAL) <<
>  			 PMC_USB_ALTMODE_DP_MODE_SHIFT;
>  
> +	if (!is_pmc_mux_tbt(port->pmc->iom_adev)) {
> +		u8 cable_speed = (data->conf & DP_CONF_SIGNALLING_MASK) >>
> +				  DP_CONF_SIGNALLING_SHIFT;
> +
> +		u8 cable_type = (data->conf & DP_CONF_CABLE_TYPE_MASK) >>
> +				 DP_CONF_CABLE_TYPE_SHIFT;
> +
> +		req.mode_data |= PMC_USB_ALTMODE_CABLE_SPD(cable_speed);
> +
> +		if (cable_type == DP_CONF_CABLE_TYPE_OPTICAL)
> +			req.mode_data |= PMC_USB_ALTMODE_CABLE_TYPE;
> +		else if (cable_type == DP_CONF_CABLE_TYPE_RE_TIMER)
> +			req.mode_data |= PMC_USB_ALTMODE_ACTIVE_CABLE |
> +					 PMC_USB_ALTMODE_RETIMER_CABLE;
> +		else if (cable_type == DP_CONF_CABLE_TYPE_RE_DRIVER)
> +			req.mode_data |= PMC_USB_ALTMODE_ACTIVE_CABLE;

   The chain of the *if* statements above is asking to use *switch* instead...

[...]

MBR, Sergey