[PATCH v7 0/2] usb: dt-bindings: ti,twlxxxx-usb: convert to DT schema

[PATCH v7 0/2] usb: dt-bindings: ti,twlxxxx-usb: convert to DT schema

[Jihed Chaibi]

Hello,

This series converts the legacy TXT bindings for the TI TWL4030
and TWL6030 USB modules to the modern YAML DT schema format.

Thank you,
Jihed

---
Changes in v7:
 - Patch (1/2) removed the corresponding twl4030 section from the
   old .txt binding file. Patch (2/2) which deletes the remaining
   twl6030 section; removes the file.

Changes in v6:
 - Reworked 'interrupts' property in both patches to use a list of
   items with descriptions, per reviewer feedback.

Changes in v5:
 - Split combined twlxxxx-usb binding into two dedicated files
   for TWL4030 and TWL6030 per maintainer feedback.
 - Used more accurate header file for interrupt macros.
 - Improved formatting in the examples.
 - Patch 2/2 removes the old .txt file.

Changes in v4:
 - This patch is split from larger series per maintainer feedback.
 - v3 link:
    https://lore.kernel.org/all/20250816021523.167049-1-jihed.chaibi.dev@gmail.com/
 - Removed i2c node as it wasn't required by the old binding file.
 - Updated node names to 'usb' and 'usb-phy' in the examples to follow
   generic naming conventions per the Device Tree specification.
 - Replaced raw interrupt values with standard defines for clarity.
 - Improved formatting in the examples for clarity and consistency.

Changes in v3:
 - No changes.

Changes in v2:
 - Added '#phy-cells' property to support PHY framework integration.

Jihed Chaibi (2):
  usb: dt-bindings: ti,twl4030-usb: convert to DT schema
  usb: dt-bindings: ti,twl6030-usb: convert to DT schema

 .../bindings/usb/ti,twl4030-usb.yaml          | 74 +++++++++++++++++++
 .../bindings/usb/ti,twl6030-usb.yaml          | 48 ++++++++++++
 .../devicetree/bindings/usb/twlxxxx-usb.txt   | 43 -----------
 3 files changed, 122 insertions(+), 43 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/usb/ti,twl4030-usb.yaml
 create mode 100644 Documentation/devicetree/bindings/usb/ti,twl6030-usb.yaml
 delete mode 100644 Documentation/devicetree/bindings/usb/twlxxxx-usb.txt

-- 
2.47.2

[PATCH v7 1/2] usb: dt-bindings: ti,twl4030-usb: convert to DT schema

[Jihed Chaibi]

Convert the legacy TXT binding for the TWL4030 USB module
to the modern YAML DT schema format. This adds formal validation
and improves documentation using a conditional schema.

Remove the twl4030 section from the obsolete .txt binding file

Signed-off-by: Jihed Chaibi <jihed.chaibi.dev@gmail.com>

---
Changes in v7:
 - Removed the twl4030 section from the obsolete .txt binding file

Changes in v6:
 - Reworked 'interrupts' property to use a list of items with
   descriptions instead of a single free-form text block.

Changes in v5:
 - Split combined twlxxxx-usb binding into a dedicated file for
   twl4030-usb per maintainer feedback.
 - Used more accurate header for interrupt macros.
 - Improved formatting in the examples.

Changes in v4:
 - This patch is split from larger series per maintainer feedback.
 - v3 link:
    https://lore.kernel.org/all/20250816021523.167049-1-jihed.chaibi.dev@gmail.com/
 - Removed i2c node as it wasn't required by the old binding file.
 - Updated node names to 'usb' and 'usb-phy' in the examples to follow
   generic naming conventions per the Device Tree specification.
 - Replaced raw interrupt values with standard defines for clarity.
 - Improved formatting in the examples for clarity and consistency.

Changes in v3:
 - No changes.

Changes in v2:
 - Added '#phy-cells' property to support PHY framework integration.
---
 .../bindings/usb/ti,twl4030-usb.yaml          | 74 +++++++++++++++++++
 .../devicetree/bindings/usb/twlxxxx-usb.txt   | 22 ------
 2 files changed, 74 insertions(+), 22 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/usb/ti,twl4030-usb.yaml

diff --git a/Documentation/devicetree/bindings/usb/ti,twl4030-usb.yaml b/Documentation/devicetree/bindings/usb/ti,twl4030-usb.yaml
new file mode 100644
index 000000000000..6ef337507425
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/ti,twl4030-usb.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/ti,twl4030-usb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments TWL4030 USB PHY and Comparator
+
+maintainers:
+  - Peter Ujfalusi <peter.ujfalusi@gmail.com>
+
+description:
+  Bindings for the USB PHY and comparator module found within the
+  TWL4030 family of companion chips. If a sibling node is compatible with
+  "ti,twl4030-bci", the driver for that node will query this device for
+  USB power status.
+
+properties:
+  compatible:
+    const: ti,twl4030-usb
+
+  interrupts:
+    minItems: 1
+    items:
+      - description: OTG interrupt number for ID events.
+      - description: USB interrupt number for VBUS events.
+
+  usb1v5-supply:
+    description: Phandle to the vusb1v5 regulator.
+
+  usb1v8-supply:
+    description: Phandle to the vusb1v8 regulator.
+
+  usb3v1-supply:
+    description: Phandle to the vusb3v1 regulator.
+
+  usb_mode:
+    description: |
+      The mode used by the PHY to connect to the controller:
+        1: ULPI mode
+        2: CEA2011_3PIN mode
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [1, 2]
+
+  '#phy-cells':
+    const: 0
+
+required:
+  - compatible
+  - interrupts
+  - usb1v5-supply
+  - usb1v8-supply
+  - usb3v1-supply
+  - usb_mode
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    usb-phy {
+        compatible = "ti,twl4030-usb";
+
+        interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-parent = <&gic>;
+
+        usb1v5-supply = <&reg_vusb1v5>;
+        usb1v8-supply = <&reg_vusb1v8>;
+        usb3v1-supply  = <&reg_vusb3v1>;
+        usb_mode = <1>;
+
+        #phy-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/usb/twlxxxx-usb.txt b/Documentation/devicetree/bindings/usb/twlxxxx-usb.txt
index 17327a296110..7194c9504b28 100644
--- a/Documentation/devicetree/bindings/usb/twlxxxx-usb.txt
+++ b/Documentation/devicetree/bindings/usb/twlxxxx-usb.txt
@@ -19,25 +19,3 @@ Board specific device node entry
 &twl6030-usb {
 	usb-supply = <&vusb>;
 };
-
-TWL4030 USB PHY AND COMPARATOR
- - compatible : Should be "ti,twl4030-usb"
- - interrupts : The interrupt numbers to the cpu should be specified. First
-   interrupt number is the otg interrupt number that raises ID interrupts
-   and VBUS interrupts. The second interrupt number is optional.
- - <supply-name>-supply : phandle to the regulator device tree node.
-   <supply-name> should be vusb1v5, vusb1v8 and vusb3v1
- - usb_mode : The mode used by the phy to connect to the controller. "1"
-   specifies "ULPI" mode and "2" specifies "CEA2011_3PIN" mode.
-
-If a sibling node is compatible "ti,twl4030-bci", then it will find
-this device and query it for USB power status.
-
-twl4030-usb {
-	compatible = "ti,twl4030-usb";
-	interrupts = < 10 4 >;
-	usb1v5-supply = <&vusb1v5>;
-	usb1v8-supply = <&vusb1v8>;
-	usb3v1-supply = <&vusb3v1>;
-	usb_mode = <1>;
-};
-- 
2.47.2

[PATCH v7 2/2] usb: dt-bindings: ti,twl6030-usb: convert to DT schema

[Jihed Chaibi]

Convert the legacy TXT binding for the TWL6030 USB module
to the modern YAML DT schema format. This adds formal validation
and improves documentation using a conditional schema.

The legacy twlxxxx-usb.txt file is no longer needed and is removed.

Signed-off-by: Jihed Chaibi <jihed.chaibi.dev@gmail.com>

---
Changes in v7:
 - At this point the obsolete .txt binding file only contains
   twl6030 related information, therefore it is deleted.

Changes in v6:
 - Reworked 'interrupts' property to use a list of items with
   descriptions per reviewer feedback.

Changes in v5:
 - Split combined twlxxxx-usb binding into a dedicated file for
   twl6030-usb per maintainer feedback.
 - Used more accurate header for interrupt macros.
 - Improved formatting in the examples.
 - This patch also removes the old .txt file.

Changes in v4:
 - This patch is split from larger series per maintainer feedback.
 - v3 link:
    https://lore.kernel.org/all/20250816021523.167049-1-jihed.chaibi.dev@gmail.com/
 - Removed i2c node as it wasn't required by the old binding file.
 - Updated node names to 'usb' and 'usb-phy' in the examples to follow
   generic naming conventions per the Device Tree specification.
 - Replaced raw interrupt values with standard defines for clarity.
 - Improved formatting in the examples for clarity and consistency.

Changes in v3:
 - No changes.

Changes in v2:
 - Added '#phy-cells' property to support PHY framework integration.
---
 .../bindings/usb/ti,twl6030-usb.yaml          | 48 +++++++++++++++++++
 .../devicetree/bindings/usb/twlxxxx-usb.txt   | 21 --------
 2 files changed, 48 insertions(+), 21 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/usb/ti,twl6030-usb.yaml
 delete mode 100644 Documentation/devicetree/bindings/usb/twlxxxx-usb.txt

diff --git a/Documentation/devicetree/bindings/usb/ti,twl6030-usb.yaml b/Documentation/devicetree/bindings/usb/ti,twl6030-usb.yaml
new file mode 100644
index 000000000000..33b6da50660a
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/ti,twl6030-usb.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/ti,twl6030-usb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments TWL6030 USB Comparator
+
+maintainers:
+  - Peter Ujfalusi <peter.ujfalusi@gmail.com>
+
+description:
+  Bindings for the USB comparator module found within the TWL6030
+  family of companion chips.
+
+properties:
+  compatible:
+    const: ti,twl6030-usb
+
+  interrupts:
+    items:
+      - description: OTG for ID events in host mode
+      - description: USB device mode for VBUS events
+
+  usb-supply:
+    description:
+      Phandle to the VUSB regulator. For TWL6030, this should be the 'vusb'
+      regulator. For TWL6032 subclass, it should be the 'ldousb' regulator.
+
+required:
+  - compatible
+  - interrupts
+  - usb-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    usb {
+        compatible = "ti,twl6030-usb";
+
+        interrupts = <4 IRQ_TYPE_LEVEL_HIGH>, <10 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-parent = <&gic>;
+
+        usb-supply = <&reg_vusb>;
+    };
diff --git a/Documentation/devicetree/bindings/usb/twlxxxx-usb.txt b/Documentation/devicetree/bindings/usb/twlxxxx-usb.txt
deleted file mode 100644
index 7194c9504b28..000000000000
--- a/Documentation/devicetree/bindings/usb/twlxxxx-usb.txt
+++ /dev/null
@@ -1,21 +0,0 @@
-USB COMPARATOR OF TWL CHIPS
-
-TWL6030 USB COMPARATOR
- - compatible : Should be "ti,twl6030-usb"
- - interrupts : Two interrupt numbers to the cpu should be specified. First
-   interrupt number is the otg interrupt number that raises ID interrupts when
-   the controller has to act as host and the second interrupt number is the
-   usb interrupt number that raises VBUS interrupts when the controller has to
-   act as device
- - usb-supply : phandle to the regulator device tree node. It should be vusb
-   if it is twl6030 or ldousb if it is twl6032 subclass.
-
-twl6030-usb {
-	compatible = "ti,twl6030-usb";
-	interrupts = < 4 10 >;
-};
-
-Board specific device node entry
-&twl6030-usb {
-	usb-supply = <&vusb>;
-};
-- 
2.47.2

Re: [PATCH v7 1/2] usb: dt-bindings: ti,twl4030-usb: convert to DT schema

[Krzysztof Kozlowski]

On 24/08/2025 13:23, Jihed Chaibi wrote:
> Convert the legacy TXT binding for the TWL4030 USB module
> to the modern YAML DT schema format. This adds formal validation
> and improves documentation using a conditional schema.
> 
> Remove the twl4030 section from the obsolete .txt binding file
> 
> Signed-off-by: Jihed Chaibi <jihed.chaibi.dev@gmail.com>
> 

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof

Re: [PATCH v7 2/2] usb: dt-bindings: ti,twl6030-usb: convert to DT schema

[Krzysztof Kozlowski]

On 24/08/2025 13:23, Jihed Chaibi wrote:
> Convert the legacy TXT binding for the TWL6030 USB module
> to the modern YAML DT schema format. This adds formal validation
> and improves documentation using a conditional schema.
> 
> The legacy twlxxxx-usb.txt file is no longer needed and is removed.
> 
> Signed-off-by: Jihed Chaibi <jihed.chaibi.dev@gmail.com>
> 

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof