Re: [PATCH] dt-bindings: usb: mtu3: Add ports property

[AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>]

Il 22/02/25 09:35, Chunfeng Yun (云春峰) ha scritto:
> On Thu, 2025-02-20 at 22:22 +0800, Macpaul Lin wrote:
>> Define the ports property in the mediatek,mtu3 device tree binding
>> schema.
>> Include definitions for port@0 and port@1, specifying their roles as
>> High Speed (HS) and Super Speed (SS) data buses, respectively.
>>
>> Suggested-by: AngeloGioacchino Del Regno <
>> angelogioacchino.delregno@collabora.com>
>> Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
>> ---
>>   .../devicetree/bindings/usb/mediatek,mtu3.yaml       | 12
>> ++++++++++++
>>   1 file changed, 12 insertions(+)
>>
>> diff --git a/Documentation/devicetree/bindings/usb/mediatek,mtu3.yaml
>> b/Documentation/devicetree/bindings/usb/mediatek,mtu3.yaml
>> index d4e187c78a0b..21fc6bbe954f 100644
>> --- a/Documentation/devicetree/bindings/usb/mediatek,mtu3.yaml
>> +++ b/Documentation/devicetree/bindings/usb/mediatek,mtu3.yaml
>> @@ -155,6 +155,18 @@ properties:
>>         property is used. See graph.txt
>>       $ref: /schemas/graph.yaml#/properties/port
>>   
>> +  ports:
>> +    $ref: /schemas/graph.yaml#/properties/ports
>> +
>> +    properties:
>> +      port@0:
>> +        $ref: /schemas/graph.yaml#/properties/port
>> +        description: High Speed (HS) data bus.
>> +
>> +      port@1:
>> +        $ref: /schemas/graph.yaml#/properties/port
>> +        description: Super Speed (SS) data bus.
>> +
>>     enable-manual-drd:
>>       $ref: /schemas/types.yaml#/definitions/flag
>>       description:
> Reviewed-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
> 
> Thank you
> 

Is everyone okay if I pick this (and the XHCI one [1]) in the MediaTek trees?

This is so that I don't get devicetree warnings when picking the DT patches
that are adding USB MUX/TCPC to the MediaTek boards.

[1]: 
https://lore.kernel.org/r/20250220105514.43107-2-angelogioacchino.delregno@collabora.com

Thanks,
Angelo