Linux USB
 help / color / mirror / Atom feed
From: sashiko-bot@kernel.org
To: "Noah Weinberger" <NoahWeinberger2003@proton.me>
Cc: "linux-usb@vger.kernel.org" <linux-usb@vger.kernel.org>
Subject: Re: [PATCH] usb: gadget: f_hid: free report list on release
Date: Sun, 08 Nov 2026 22:44:46 +0000	[thread overview]
Message-ID: <sashiko-outbox-204126@kernel.org> (raw)
In-Reply-To: <1QsGBy1k7rgvDtVuIrw8wkuScqkmKf-h2yKjARCmaLFH2TFGvlr8izECUG0Pq-FRMo3NqA6bmTOayxrZ8xc0xwSOKjLLpz9flCzQomrlnqk=@proton.me>

Thank you for your contribution! Sashiko AI review found 1 potential
issue to consider:
- [Low] usb: gadget: f_hid: missing Fixes/Signed-off-by tags and
  changelog/style nits
It also noticed 1 related pre-existing issue this patch does not
introduce:
- [Medium] usb: gadget: f_hid: memory leak of hidg->get_req in
  hidg_unbind() [1]
--

commit 6b437be3613ff7b4c0c239461caa731cf0c00ade
Author: Noah Weinberger <NoahWeinberger2003@proton.me>

> usb: gadget: f_hid: free report list on release
>
> Hello,
>
> Entries added to hidg->report_list by the GADGET_HID_WRITE_GET_REPORT
> ioctl are never freed: hidg_release() releases report_desc,
> set_report_buf and hidg itself, but never walks the list (and
> hidg_unbind() does not either). Each distinct report_id used over the
> lifetime of a function instance therefore leaks one entry (~72 bytes),
> which adds up across gadget reconfiguration cycles.
>
> Free the list when the device's last reference is dropped.
>
> Affected version/commit: mainline fa4ad798f6f681031775266044ba1b0cf3c670bd (v7.4-rc1, 2026-11-07), drivers/usb/gadget/function/f_hid.c:679-682 (list add), 121-128 (hidg_release).
> The report-list mechanism is newer; the leak is present at HEAD.
>
> This was found during an assisted (AI-supported) static source review of
> mainline fa4ad798f6f681031775266044ba1b0cf3c670bd (v7.4-rc1, 2026-11-07); every code path cited below was re-verified by the
> reporter against that tree. The patch below has NOT been compiled and has
> NOT been runtime tested, and no reproducer was produced - the triggering
> conditions are described above instead. Please treat this as a report for
> verification rather than a battle-tested fix.
>
> Reported-by: Noah Weinberger <noahweinberger2003@proton.me>

[Severity: Low]
This commit fixes the report_list leak introduced in a139c98f760e ("USB:
gadget: f_hid: Add GET_REPORT via userspace IOCTL"), so it should include:

  Fixes: a139c98f760e ("USB: gadget: f_hid: Add GET_REPORT via userspace IOCTL")

Note that 4e0a88254ad5 ("usb: gadget: f_hid: move list and spinlock inits
from bind to alloc") is a prerequisite for stable backports so that
hidg->report_list is initialized in hidg_alloc() before device_initialize().

The commit message is also missing a Signed-off-by: trailer, and the
greeting and testing disclaimers belong below the "---" tear line rather
than in the permanent changelog.  Finally, the diff adds a second
consecutive blank line after the list_for_each_entry_safe() loop in
hidg_release().

> diff --git a/drivers/usb/gadget/function/f_hid.c b/drivers/usb/gadget/function/f_hid.c
> index 3c6b43d06a6d1..dcf6dce1e1d6c 100644
> --- a/drivers/usb/gadget/function/f_hid.c
> +++ b/drivers/usb/gadget/function/f_hid.c
> @@ -121,6 +121,13 @@ static inline struct f_hidg *func_to_hidg(struct usb_function *f)
>  static void hidg_release(struct device *dev)
>  {
>  	struct f_hidg *hidg = container_of(dev, struct f_hidg, dev);
> +	struct report_entry *entry, *tmp;
> +
> +	list_for_each_entry_safe(entry, tmp, &hidg->report_list, node) {
> +		list_del(&entry->node);
> +		kfree(entry);
> +	}
> +
>  
>  	kfree(hidg->report_desc);
>  	kfree(hidg->set_report_buf);

[Severity: Medium]
This problem wasn't introduced by this patch, but does hidg_unbind() also
leak hidg->get_req when no GET_REPORT request is pending [1]?

hidg_bind() unconditionally allocates hidg->get_req via
usb_ep_alloc_request(c->cdev->gadget->ep0, GFP_ATOMIC), whereas
hidg_disable() only frees it when a GET_REPORT request is in flight:

drivers/usb/gadget/function/f_hid.c:hidg_disable() {
	...
	spin_lock_irqsave(&hidg->get_report_spinlock, flags);
	if (!hidg->get_report_returned) {
		usb_ep_free_request(f->config->cdev->gadget->ep0, hidg->get_req);
		hidg->get_req = NULL;
		hidg->get_report_returned = true;
	}
	spin_unlock_irqrestore(&hidg->get_report_spinlock, flags);
	...
}

When the gadget is unbound while idle, hidg->get_report_returned is true
and hidg_unbind() never frees hidg->get_req, leaking the usb_request on
every bind/unbind cycle.

[1] https://sashiko.dev/#/bug/linux-b7d8a0a0-a788-48be-a1a4-1106b659764e

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/1QsGBy1k7rgvDtVuIrw8wkuScqkmKf-h2yKjARCmaLFH2TFGvlr8izECUG0Pq-FRMo3NqA6bmTOayxrZ8xc0xwSOKjLLpz9flCzQomrlnqk=@proton.me?part=1

      reply	other threads:[~2026-11-08 22:44 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-11-08 22:32 [PATCH] usb: gadget: f_hid: free report list on release Noah Weinberger
2026-11-08 22:44 ` sashiko-bot [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=sashiko-outbox-204126@kernel.org \
    --to=sashiko-bot@kernel.org \
    --cc=NoahWeinberger2003@proton.me \
    --cc=linux-usb@vger.kernel.org \
    --cc=sashiko-reviews@lists.linux.dev \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox