Linux USB
 help / color / mirror / Atom feed
From: sashiko-bot@kernel.org
To: "Birger Koblitz" <mail@birger-koblitz.de>
Cc: linux-usb@vger.kernel.org
Subject: Re: [PATCH net-next v21 11/13] ax88179_178a: Update driver name and information
Date: Sun, 15 Nov 2026 10:51:57 +0000	[thread overview]
Message-ID: <sashiko-outbox-215424@kernel.org> (raw)
In-Reply-To: <20261114-ax88179a-v21-11-c2d34410bcbe@birger-koblitz.de>

Thank you for your contribution! Sashiko AI review found 1 potential
issue to consider:
- [Medium] net: usb: ax88179: Kconfig rename drops default y and
  disables driver
--

commit a2dd9912da623ded3490ea8a07a91779c220769c
Author: Birger Koblitz <mail@birger-koblitz.de>

ax88179_178a: Update driver name and information

This commit renames Kconfig symbol USB_NET_AX88179_178A to USB_NET_AX88179,
updates the USB driver name to "ax88179", and expands the Kconfig and
module descriptions for newly supported ASIX chips.

> diff --git a/drivers/net/usb/Kconfig b/drivers/net/usb/Kconfig
> index 115990b0d9537..cc8f2e1503399 100644
> --- a/drivers/net/usb/Kconfig
> +++ b/drivers/net/usb/Kconfig
> @@ -195,18 +195,21 @@ config USB_NET_AX8817X
>  	  This driver creates an interface named "ethX", where X depends on
>  	  what other networking devices you have in use.
>  
> -config USB_NET_AX88179_178A
> -	tristate "ASIX AX88179/178A USB 3.0/2.0 to Gigabit Ethernet"
> +config USB_NET_AX88179
> +	tristate "ASIX AX88179/179A/178A USB 2.0/3.0 to 100M/1G/2.5GbE Adapters"
>  	depends on USB_USBNET
> -	select CRC32
>  	select PHYLINK
> -	default y
> +	select AX88796B_PHY
> +	select CRC32

[Severity: Medium]
Does dropping "default y" when renaming USB_NET_AX88179_178A to
USB_NET_AX88179 disable this driver across existing configurations?

Because savedefconfig omits symbols that match their default, the 25 in-tree
defconfigs that enable CONFIG_USB_USBNET relied on "default y" to build this
driver and did not list CONFIG_USB_NET_AX88179_178A explicitly.  Removing
"default y" alongside the symbol rename causes a regression where
CONFIG_USB_NET_AX88179 defaults to n, disabling the driver in those
defconfigs and when updating existing .config files via olddefconfig, while
also making the "# CONFIG_USB_NET_AX88179 is not set" overrides in
loongson32_defconfig and loongson64_defconfig redundant.

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20261114-ax88179a-v21-0-c2d34410bcbe@birger-koblitz.de?part=11

  reply	other threads:[~2026-11-15 10:51 UTC|newest]

Thread overview: 27+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-11-14 10:50 [PATCH net-next v21 00/13] ax88179_178a: Add support for AX88179A-based chips Birger Koblitz
2026-11-14 10:50 ` [PATCH net-next v21 01/13] phylink: Add phylink_mac_interrupt Birger Koblitz
2026-11-15 10:51   ` sashiko-bot
2026-11-14 10:50 ` [PATCH net-next v21 02/13] phylib: Add support for PHYs with broken forced mode Birger Koblitz
2026-11-15 10:51   ` sashiko-bot
2026-11-14 10:50 ` [PATCH net-next v21 03/13] ax88179_178a: Split driver into library and device specific code Birger Koblitz
2026-11-15 10:51   ` sashiko-bot
2026-11-14 10:51 ` [PATCH net-next v21 04/13] ax88179_178a: Add HW support for AX179A-based chips Birger Koblitz
2026-11-15 10:51   ` sashiko-bot
2026-11-14 10:51 ` [PATCH net-next v21 05/13] ax88179_178a: Add EEE configuration support for AX88179A MACs Birger Koblitz
2026-11-15 10:51   ` sashiko-bot
2026-11-14 10:51 ` [PATCH net-next v21 06/13] ax88179_178a: Add EEE configuration support for AX88179A PHYs Birger Koblitz
2026-11-15 10:51   ` sashiko-bot
2026-11-14 10:51 ` [PATCH net-next v21 07/13] ax88179_178a: Add VLAN offload support for AX88179A Birger Koblitz
2026-11-15 10:51   ` sashiko-bot
2026-11-14 10:51 ` [PATCH net-next v21 08/13] ax88179_178a: Add AX179A/AX279 multicast configuration Birger Koblitz
2026-11-15 10:51   ` sashiko-bot
2026-11-14 10:51 ` [PATCH net-next v21 09/13] ax88179_178a: Add Suspend/resume support for AX88179A/772D/279 Birger Koblitz
2026-11-15 10:51   ` sashiko-bot
2026-11-14 10:51 ` [PATCH net-next v21 10/13] ax88179_178a: Add ethtool get_drvinfo Birger Koblitz
2026-11-15 10:51   ` sashiko-bot
2026-11-14 10:51 ` [PATCH net-next v21 11/13] ax88179_178a: Update driver name and information Birger Koblitz
2026-11-15 10:51   ` sashiko-bot [this message]
2026-11-14 10:51 ` [PATCH net-next v21 12/13] ax88179_178a: Add support for AX88179A/772D/279 EEPROM access Birger Koblitz
2026-11-15 10:51   ` sashiko-bot
2026-11-14 10:51 ` [PATCH net-next v21 13/13] ax88796b: Add support for AX88772D, AX88179A and AX88279 Birger Koblitz
2026-11-15 10:51   ` sashiko-bot

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=sashiko-outbox-215424@kernel.org \
    --to=sashiko-bot@kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=mail@birger-koblitz.de \
    --cc=sashiko-reviews@lists.linux.dev \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox