[PATCH v3] USB: serial: option: add support for SIMCom SIM8260C

[Zhao Dongdong <winter91@foxmail.com>]

From: Zhao Dongdong <zhaodongdong@kylinos.cn>

Add support for SIMCom SIM8260C (1e0e:902b).

T:  Bus=08 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=5000 MxCh= 0
D:  Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs=  1
P:  Vendor=1e0e ProdID=902b Rev= 5.04
S:  Manufacturer=SIMCOM
S:  Product=SDXLEMUR-LITE-MTP _SN:120696AB
S:  SerialNumber=0123456789ABCDEF
C:* #Ifs= 8 Cfg#= 1 Atr=a0 MxPwr=896mA
A:  FirstIf#= 5 IfCount= 3 Cls=01(audio) Sub=00 Prot=20
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E:  Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option
E:  Ad=83(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=85(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=84(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=87(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=86(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan_simcom
E:  Ad=88(I) Atr=03(Int.) MxPS=   8 Ivl=32ms
E:  Ad=8e(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=0f(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 5 Alt= 0 #EPs= 0 Cls=01(audio) Sub=01 Prot=20 Driver=snd-usb-audio
I:* If#= 6 Alt= 0 #EPs= 0 Cls=01(audio) Sub=02 Prot=20 Driver=snd-usb-audio
I:  If#= 6 Alt= 1 #EPs= 1 Cls=01(audio) Sub=02 Prot=20 Driver=snd-usb-audio
E:  Ad=05(O) Atr=0d(Isoc) MxPS=  34 Ivl=1ms
I:* If#= 7 Alt= 0 #EPs= 0 Cls=01(audio) Sub=02 Prot=20 Driver=option
I:  If#= 7 Alt= 1 #EPs= 1 Cls=01(audio) Sub=02 Prot=20 Driver=option
E:  Ad=89(I) Atr=0d(Isoc) MxPS=  34 Ivl=1ms

Signed-off-by: Zhao Dongdong <zhaodongdong@kylinos.cn>
---
v3: Use USB_DEVICE_INTERFACE_CLASS.
v2: https://lore.kernel.org/all/tencent_E58647B4DE1D2583D785AFDDE58EB278FD05@qq.com/
v1: https://lore.kernel.org/all/tencent_CDB9F0B44FDD051447DCF48862B8E764E80A@qq.com/
---
 drivers/usb/serial/option.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 580f06f5ce5e..06a8e26afdff 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -2168,6 +2168,8 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_INTERFACE_CLASS(0x1e0e, 0x9003, 0xff) },	/* Simcom SIM7500/SIM7600 MBIM mode */
 	{ USB_DEVICE_INTERFACE_CLASS(0x1e0e, 0x9011, 0xff),	/* Simcom SIM7500/SIM7600 RNDIS mode */
 	  .driver_info = RSVD(7) },
+	{ USB_DEVICE_INTERFACE_CLASS(0x1e0e, 0x902b, 0xff),
+	  .driver_info = RSVD(4) },
 	{ USB_DEVICE(0x1e0e, 0x9071),				/* Simcom SIM8230 RMNET mode */
 	  .driver_info = RSVD(3) | RSVD(4) },
 	{ USB_DEVICE_INTERFACE_CLASS(0x1e0e, 0x9078, 0xff),	/* Simcom SIM8230 ECM mode */
-- 
2.25.1