Re: [PATCH 1/2] dt-bindings: watchdog: Add NXP Software Watchdog Timer

[Daniel Lezcano <daniel.lezcano@linaro.org>]

On 29/03/2025 06:04, Krzysztof Kozlowski wrote:
> On 28/03/2025 16:15, Daniel Lezcano wrote:
>> +description:
>> +  The System Timer Module supports commonly required system and
>> +  application software timing functions. STM includes a 32-bit
>> +  count-up timer and four 32-bit compare channels with a separate
>> +  interrupt source for each channel. The timer is driven by the STM
>> +
>> +allOf:
>> +  - $ref: watchdog.yaml#
>> +
>> +properties:
>> +  compatible:
>> +    enum:
>> +      - nxp,s32g-wdt
> This wasn't tested, so limited review - this also has wrong compatible,
> There is no such soc as s32g in the kernel. If that's a new soc, come
> with proper top-level bindings and some explanation, because I am sure
> previously we talked with NXP that this is not s32g but something else.

If I refer to Documentation/devicetree/bindings/arm/fsl.yaml

We found the entries:

       - description: S32G2 based Boards
         items:
           - enum:
               - nxp,s32g274a-evb
               - nxp,s32g274a-rdb2
           - const: nxp,s32g2

       - description: S32G3 based Boards
         items:
           - enum:
               - nxp,s32g399a-rdb3
           - const: nxp,s32g3

I guess it should nxp,s32g2-wdt and nxp,s32g3-wdt

Right ?


-- 
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog