From: Ashish Jangam <ashish.jangam@kpitcummins.com>
To: Wim Van Sebroeck <wim@iguana.be>
Cc: Samuel Ortiz <sameo@linux.intel.com>,
<linux-watchdog@vger.kernel.org>,
David Dajun Chen <dchen@diasemi.com>
Subject: [Patch v1 6/7] DA9055 Watchdog driver
Date: Fri, 14 Sep 2012 19:03:24 +0530 [thread overview]
Message-ID: <1347629604.18587.19.camel@dhruva> (raw)
This is the Watchdog patch for the DA9055 PMIC. This patch has got
dependency on the DA9055 MFD core.
This patch is functionally tested on SMDK6410
Signed-off-by: David Dajun Chen <dchen@diasemi.com>
Signed-off-by: Ashish Jangam <ashish.jangam@kpitcummins.com>
---
drivers/watchdog/Kconfig | 10 ++
drivers/watchdog/Makefile | 1 +
drivers/watchdog/da9055_wdt.c | 227 +++++++++++++++++++++++++++++++++++++++++
3 files changed, 238 insertions(+), 0 deletions(-)
create mode 100644 drivers/watchdog/da9055_wdt.c
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 53d7571..eb51bf2 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -76,6 +76,16 @@ config DA9052_WATCHDOG
Alternatively say M to compile the driver as a module,
which will be called da9052_wdt.
+config DA9055_WATCHDOG
+ tristate "Dialog Semiconductor DA9055 Watchdog"
+ depends on MFD_DA9055
+ help
+ If you say yes here you get support for watchdog on the Dialog
+ Semiconductor DA9055 PMIC.
+
+ This driver can also be built as a module. If so, the module
+ will be called da9055_wdt.
+
config WM831X_WATCHDOG
tristate "WM831x watchdog"
depends on MFD_WM831X
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index 572b39b..97bbdb3 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -164,6 +164,7 @@ obj-$(CONFIG_XEN_WDT) += xen_wdt.o
# Architecture Independent
obj-$(CONFIG_DA9052_WATCHDOG) += da9052_wdt.o
+obj-$(CONFIG_DA9055_WATCHDOG) += da9055_wdt.o
obj-$(CONFIG_WM831X_WATCHDOG) += wm831x_wdt.o
obj-$(CONFIG_WM8350_WATCHDOG) += wm8350_wdt.o
obj-$(CONFIG_MAX63XX_WATCHDOG) += max63xx_wdt.o
diff --git a/drivers/watchdog/da9055_wdt.c b/drivers/watchdog/da9055_wdt.c
new file mode 100644
index 0000000..4cb8689
--- /dev/null
+++ b/drivers/watchdog/da9055_wdt.c
@@ -0,0 +1,227 @@
+/*
+ * System monitoring driver for DA9055 PMICs.
+ *
+ * Copyright(c) 2012 Dialog Semiconductor Ltd.
+ *
+ * Author: David Dajun Chen <dchen@diasemi.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+#include <linux/watchdog.h>
+#include <linux/watchdog.h>
+#include <linux/delay.h>
+
+#include <linux/mfd/da9055/core.h>
+#include <linux/mfd/da9055/reg.h>
+
+static bool nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, bool, 0);
+MODULE_PARM_DESC(nowayout,
+ "Watchdog cannot be stopped once started (default="
+ __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+#define DA9055_DEF_TIMEOUT 4
+#define DA9055_TWDMIN 256
+
+struct da9055_wdt_data {
+ struct watchdog_device wdt;
+ struct da9055 *da9055;
+ struct kref kref;
+};
+
+static const struct {
+ u8 reg_val;
+ int user_time; /* In seconds */
+} da9055_wdt_maps[] = {
+ { 0, 0 },
+ { 1, 2 },
+ { 2, 4 },
+ { 3, 8 },
+ { 4, 16 },
+ { 5, 32 },
+ { 5, 33 }, /* Actual time 32.768s so included both 32s and 33s */
+ { 6, 65 },
+ { 6, 66 }, /* Actual time 65.536s so include both, 65s and 66s */
+ { 7, 131 },
+};
+
+static int da9055_wdt_set_timeout(struct watchdog_device *wdt_dev,
+ unsigned int timeout)
+{
+ struct da9055_wdt_data *driver_data = watchdog_get_drvdata(wdt_dev);
+ struct da9055 *da9055 = driver_data->da9055;
+ int ret, i;
+
+ for (i = 0; i < ARRAY_SIZE(da9055_wdt_maps); i++)
+ if (da9055_wdt_maps[i].user_time == timeout)
+ break;
+
+ if (i == ARRAY_SIZE(da9055_wdt_maps))
+ ret = -EINVAL;
+ else
+ ret = da9055_reg_update(da9055, DA9055_REG_CONTROL_B,
+ DA9055_TWDSCALE_MASK,
+ da9055_wdt_maps[i].reg_val <<
+ DA9055_TWDSCALE_SHIFT);
+ if (ret < 0)
+ dev_err(da9055->dev,
+ "Failed to update timescale bit, %d\n", ret);
+
+ wdt_dev->timeout = timeout;
+
+ return ret;
+}
+
+static int da9055_wdt_ping(struct watchdog_device *wdt_dev)
+{
+ struct da9055_wdt_data *driver_data = watchdog_get_drvdata(wdt_dev);
+ struct da9055 *da9055 = driver_data->da9055;
+ int ret;
+
+ /*
+ * We have a minimum time for watchdog window called TWDMIN. A write
+ * to the watchdog before this elapsed time will cause an error.
+ */
+ mdelay(DA9055_TWDMIN);
+
+ /* Reset the watchdog timer */
+ ret = da9055_reg_update(da9055, DA9055_REG_CONTROL_E,
+ DA9055_WATCHDOG_MASK, 1);
+
+ return ret;
+}
+
+static void da9055_wdt_release_resources(struct kref *r)
+{
+ struct da9055_wdt_data *driver_data =
+ container_of(r, struct da9055_wdt_data, kref);
+
+ kfree(driver_data);
+}
+
+static void da9055_wdt_ref(struct watchdog_device *wdt_dev)
+{
+ struct da9055_wdt_data *driver_data = watchdog_get_drvdata(wdt_dev);
+
+ kref_get(&driver_data->kref);
+}
+
+static void da9055_wdt_unref(struct watchdog_device *wdt_dev)
+{
+ struct da9055_wdt_data *driver_data = watchdog_get_drvdata(wdt_dev);
+
+ kref_put(&driver_data->kref, da9055_wdt_release_resources);
+}
+
+static int da9055_wdt_start(struct watchdog_device *wdt_dev)
+{
+ return da9055_wdt_set_timeout(wdt_dev, wdt_dev->timeout);
+}
+
+static int da9055_wdt_stop(struct watchdog_device *wdt_dev)
+{
+ return da9055_wdt_set_timeout(wdt_dev, 0);
+}
+
+static struct watchdog_info da9055_wdt_info = {
+ .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
+ .identity = "DA9055 Watchdog",
+};
+
+static const struct watchdog_ops da9055_wdt_ops = {
+ .owner = THIS_MODULE,
+ .start = da9055_wdt_start,
+ .stop = da9055_wdt_stop,
+ .ping = da9055_wdt_ping,
+ .set_timeout = da9055_wdt_set_timeout,
+ .ref = da9055_wdt_ref,
+ .unref = da9055_wdt_unref,
+};
+
+static int __devinit da9055_wdt_probe(struct platform_device *pdev)
+{
+ struct da9055 *da9055 = dev_get_drvdata(pdev->dev.parent);
+ struct da9055_wdt_data *driver_data;
+ struct watchdog_device *da9055_wdt;
+ int ret;
+
+ driver_data = devm_kzalloc(&pdev->dev, sizeof(*driver_data),
+ GFP_KERNEL);
+ if (!driver_data) {
+ dev_err(da9055->dev, "Failed to allocate watchdog device\n");
+ return -ENOMEM;
+ }
+
+ driver_data->da9055 = da9055;
+
+ da9055_wdt = &driver_data->wdt;
+
+ da9055_wdt->timeout = DA9055_DEF_TIMEOUT;
+ da9055_wdt->info = &da9055_wdt_info;
+ da9055_wdt->ops = &da9055_wdt_ops;
+ watchdog_set_nowayout(da9055_wdt, nowayout);
+ watchdog_set_drvdata(da9055_wdt, driver_data);
+
+ kref_init(&driver_data->kref);
+
+ ret = da9055_wdt_stop(da9055_wdt);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "Failed to stop watchdog, %d\n", ret);
+ goto err;
+ }
+
+ dev_set_drvdata(&pdev->dev, driver_data);
+
+ ret = watchdog_register_device(&driver_data->wdt);
+ if (ret != 0)
+ dev_err(da9055->dev, "watchdog_register_device() failed: %d\n",
+ ret);
+
+err:
+ return ret;
+}
+
+static int __devexit da9055_wdt_remove(struct platform_device *pdev)
+{
+ struct da9055_wdt_data *driver_data = dev_get_drvdata(&pdev->dev);
+
+ watchdog_unregister_device(&driver_data->wdt);
+ kref_put(&driver_data->kref, da9055_wdt_release_resources);
+
+ return 0;
+}
+
+static struct platform_driver da9055_wdt_driver = {
+ .probe = da9055_wdt_probe,
+ .remove = __devexit_p(da9055_wdt_remove),
+ .driver = {
+ .name = "da9055-watchdog",
+ },
+};
+
+static int __init da9055_wdt_init(void)
+{
+ return platform_driver_register(&da9055_wdt_driver);
+}
+module_init(da9055_wdt_init);
+
+static void __exit da9055_wdt_exit(void)
+{
+ platform_driver_unregister(&da9055_wdt_driver);
+}
+module_exit(da9055_wdt_exit);
+
+MODULE_AUTHOR("David Dajun Chen <dchen@diasemi.com>");
+MODULE_DESCRIPTION("DA9055 watchdog");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:da9055-watchdog");
--
1.7.0.4
next reply other threads:[~2012-09-14 13:23 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-09-14 13:33 Ashish Jangam [this message]
2012-09-24 9:08 ` [Patch v1 6/7] DA9055 Watchdog driver Ashish Jangam
2012-09-24 9:12 ` Wim Van Sebroeck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1347629604.18587.19.camel@dhruva \
--to=ashish.jangam@kpitcummins.com \
--cc=dchen@diasemi.com \
--cc=linux-watchdog@vger.kernel.org \
--cc=sameo@linux.intel.com \
--cc=wim@iguana.be \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox