From: Guenter Roeck <linux@roeck-us.net>
To: linux-watchdog@vger.kernel.org
Cc: Wim Van Sebroeck <wim@iguana.be>,
linux-kernel@vger.kernel.org, Guenter Roeck <linux@roeck-us.net>
Subject: [PATCH v2 0/8] watchdog: w83627hf: Convert to watchdog infrastructure
Date: Sun, 10 Mar 2013 16:14:53 -0700 [thread overview]
Message-ID: <1362957300-18223-1-git-send-email-linux@roeck-us.net> (raw)
Convert to watchdog infrastructure, cleanup, add support for additional
chips, and merge with W83697HF and W83697UG watchdog drivers.
Tested with W83627UHG, NCT6775, NCT6776. Additional test feedback
for other chips would be appreciated.
Original idea was to prepare the driver for use as a client to an MFD driver,
but I found that requesting memory with request_muxed_region works just as well
and has less impact. v2 includes the knowledge gained from converting the
driver to an MFD client driver, but without the actual conversion.
v2: Tested with W83627UHG
Retain timeout module parameter; use watchdog_init_timeout to set it
Eliminate some cosmetic changes
Drop spinlock.h include
Keep "initialized" message
Don't try to configure WDTO for W83627UHG and W83627EHF
Don't report the nowayout option with the 'initializing' message
Use request_muxed_region to reserve memory range only while needed
Add support for W83627S, W83627DHG-P, W83667HG, and NCT6779
next reply other threads:[~2013-03-10 23:15 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-03-10 23:14 Guenter Roeck [this message]
2013-03-10 23:14 ` [PATCH v2 1/7] watchdog: w83627hf: Convert to watchdog infrastructure Guenter Roeck
2013-03-10 23:14 ` [PATCH v2 2/7] watchdog: w83627hf: Enable watchdog only once Guenter Roeck
2013-03-19 17:26 ` Pádraig Brady
2013-03-19 20:02 ` Guenter Roeck
2013-03-21 18:40 ` Pádraig Brady
2013-03-10 23:14 ` [PATCH v2 3/7] watchdog: w83627hf: Enable watchdog device only if not already enabled Guenter Roeck
2013-03-10 23:14 ` [PATCH v2 4/7] watchdog: w83627hf: Use helper functions to access superio registers Guenter Roeck
2013-03-10 23:14 ` [PATCH v2 5/7] watchdog: w83627hf: Auto-detect IO address and supported chips Guenter Roeck
2013-03-10 23:14 ` [PATCH v2 6/7] watchdog: w83627hf: Add support for W83697HF and W83697UG Guenter Roeck
2013-03-10 23:15 ` [PATCH v2 7/7] watchdog: Remove drivers " Guenter Roeck
2013-03-22 20:52 ` [PATCH v2 0/8] watchdog: w83627hf: Convert to watchdog infrastructure Wim Van Sebroeck
2013-03-22 21:09 ` [RFC] winbond Super-I/O MFD driver Wim Van Sebroeck
2013-03-23 0:28 ` [PATCH v2 0/8] watchdog: w83627hf: Convert to watchdog infrastructure Guenter Roeck
2013-03-23 12:57 ` Wim Van Sebroeck
2013-03-23 15:01 ` Guenter Roeck
2013-03-23 15:15 ` mfd: Core driver for W836{2389}7[T]HF Guenter Roeck
2013-03-23 17:49 ` mfd: Core driver for Winbond chips Guenter Roeck
2013-03-24 2:39 ` Guenter Roeck
2013-04-09 9:37 ` Samuel Ortiz
2013-04-09 11:36 ` Guenter Roeck
2013-04-09 11:45 ` Wim Van Sebroeck
2013-04-09 16:18 ` Guenter Roeck
2013-04-09 17:31 ` Wim Van Sebroeck
2013-04-10 0:36 ` Guenter Roeck
2013-04-10 20:59 ` Wim Van Sebroeck
2013-04-29 15:00 ` Guenter Roeck
2013-04-09 11:37 ` Wim Van Sebroeck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1362957300-18223-1-git-send-email-linux@roeck-us.net \
--to=linux@roeck-us.net \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-watchdog@vger.kernel.org \
--cc=wim@iguana.be \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).