[PATCH 3/7] net/ethernet: smsc: Drop conditional code for H8/300

[Guenter Roeck <linux@roeck-us.net>]

With the H8/300 architecture gone, this code is no longer necessary.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
---
 drivers/net/ethernet/smsc/smc9194.c |   12 ------------
 1 file changed, 12 deletions(-)

diff --git a/drivers/net/ethernet/smsc/smc9194.c b/drivers/net/ethernet/smsc/smc9194.c
index e85c2e7..814f59b 100644
--- a/drivers/net/ethernet/smsc/smc9194.c
+++ b/drivers/net/ethernet/smsc/smc9194.c
@@ -95,14 +95,6 @@ static const char version[] =
 #define USE_32_BIT 1
 #endif
 
-#if defined(__H8300H__) || defined(__H8300S__)
-#define NO_AUTOPROBE
-#undef insl
-#undef outsl
-#define insl(a,b,l)  io_insl_noswap(a,b,l)
-#define outsl(a,b,l) io_outsl_noswap(a,b,l)
-#endif
-
 /*
  .the SMC9194 can be at any of the following port addresses.  To change,
  .for a slightly different card, you can add it to the array.  Keep in
@@ -651,11 +643,7 @@ static void smc_hardware_send_packet( struct net_device * dev )
 #ifdef USE_32_BIT
 	if ( length & 0x2  ) {
 		outsl(ioaddr + DATA_1, buf,  length >> 2 );
-#if !defined(__H8300H__) && !defined(__H8300S__)
 		outw( *((word *)(buf + (length & 0xFFFFFFFC))),ioaddr +DATA_1);
-#else
-		ctrl_outw( *((word *)(buf + (length & 0xFFFFFFFC))),ioaddr +DATA_1);
-#endif
 	}
 	else
 		outsl(ioaddr + DATA_1, buf,  length >> 2 );
-- 
1.7.9.7