From: Guenter Roeck <linux@roeck-us.net>
To: linux-watchdog@vger.kernel.org
Cc: Wim Van Sebroeck <wim@iguana.be>,
Pratyush Anand <panand@redhat.com>,
Hans de Goede <hdegoede@redhat.com>,
Damien Riegel <damien.riegel@savoirfairelinux.com>,
linux-kernel@vger.kernel.org, Guenter Roeck <linux@roeck-us.net>
Subject: [PATCH v2 4/6] watchdog: da9052_wdt: Drop reference counting
Date: Fri, 25 Dec 2015 16:01:43 -0800 [thread overview]
Message-ID: <1451088105-1722-5-git-send-email-linux@roeck-us.net> (raw)
In-Reply-To: <1451088105-1722-1-git-send-email-linux@roeck-us.net>
Reference counting is now implemented in the watchdog core and no longer
required in watchdog drivers.
Since it was implememented a no-op, and since the local memory is allocated
with devm_kzalloc(), the reference counting code in the driver really did
not really work anyway, and this patch effectively fixes a bug which could
cause a crash on unloading if the watchdog device was still open.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
---
v4: Add note that this patch also fixes a bug.
drivers/watchdog/da9052_wdt.c | 24 ------------------------
1 file changed, 24 deletions(-)
diff --git a/drivers/watchdog/da9052_wdt.c b/drivers/watchdog/da9052_wdt.c
index 67e67977bd29..2fc19a32a320 100644
--- a/drivers/watchdog/da9052_wdt.c
+++ b/drivers/watchdog/da9052_wdt.c
@@ -31,7 +31,6 @@
struct da9052_wdt_data {
struct watchdog_device wdt;
struct da9052 *da9052;
- struct kref kref;
unsigned long jpast;
};
@@ -51,10 +50,6 @@ static const struct {
};
-static void da9052_wdt_release_resources(struct kref *r)
-{
-}
-
static int da9052_wdt_set_timeout(struct watchdog_device *wdt_dev,
unsigned int timeout)
{
@@ -104,20 +99,6 @@ static int da9052_wdt_set_timeout(struct watchdog_device *wdt_dev,
return 0;
}
-static void da9052_wdt_ref(struct watchdog_device *wdt_dev)
-{
- struct da9052_wdt_data *driver_data = watchdog_get_drvdata(wdt_dev);
-
- kref_get(&driver_data->kref);
-}
-
-static void da9052_wdt_unref(struct watchdog_device *wdt_dev)
-{
- struct da9052_wdt_data *driver_data = watchdog_get_drvdata(wdt_dev);
-
- kref_put(&driver_data->kref, da9052_wdt_release_resources);
-}
-
static int da9052_wdt_start(struct watchdog_device *wdt_dev)
{
return da9052_wdt_set_timeout(wdt_dev, wdt_dev->timeout);
@@ -170,8 +151,6 @@ static const struct watchdog_ops da9052_wdt_ops = {
.stop = da9052_wdt_stop,
.ping = da9052_wdt_ping,
.set_timeout = da9052_wdt_set_timeout,
- .ref = da9052_wdt_ref,
- .unref = da9052_wdt_unref,
};
@@ -198,8 +177,6 @@ static int da9052_wdt_probe(struct platform_device *pdev)
da9052_wdt->parent = &pdev->dev;
watchdog_set_drvdata(da9052_wdt, driver_data);
- kref_init(&driver_data->kref);
-
ret = da9052_reg_update(da9052, DA9052_CONTROL_D_REG,
DA9052_CONTROLD_TWDSCALE, 0);
if (ret < 0) {
@@ -225,7 +202,6 @@ static int da9052_wdt_remove(struct platform_device *pdev)
struct da9052_wdt_data *driver_data = platform_get_drvdata(pdev);
watchdog_unregister_device(&driver_data->wdt);
- kref_put(&driver_data->kref, da9052_wdt_release_resources);
return 0;
}
--
2.1.4
next prev parent reply other threads:[~2015-12-26 0:01 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-12-26 0:01 [PATCH v2 0/6] watchdog: Replace driver based refcounting Guenter Roeck
2015-12-26 0:01 ` [PATCH v2 1/6] watchdog: Create watchdog device in watchdog_dev.c Guenter Roeck
2015-12-26 0:01 ` [PATCH v2 2/6] watchdog: diag288: Stop re-using watchdog core internal flags Guenter Roeck
2015-12-26 0:01 ` [PATCH v2 3/6] watchdog: Separate and maintain variables based on variable lifetime Guenter Roeck
2015-12-26 0:01 ` Guenter Roeck [this message]
2015-12-26 0:01 ` [PATCH v2 5/6] watchdog: da9055_wdt: Drop reference counting Guenter Roeck
2015-12-26 0:01 ` [PATCH v2 6/6] hwmon: (sch56xx) Drop watchdog driver data reference count callbacks Guenter Roeck
2015-12-29 20:00 ` [PATCH v2 0/6] watchdog: Replace driver based refcounting Wim Van Sebroeck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1451088105-1722-5-git-send-email-linux@roeck-us.net \
--to=linux@roeck-us.net \
--cc=damien.riegel@savoirfairelinux.com \
--cc=hdegoede@redhat.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-watchdog@vger.kernel.org \
--cc=panand@redhat.com \
--cc=wim@iguana.be \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).