From: Guenter Roeck <linux@roeck-us.net>
To: linux-watchdog@vger.kernel.org
Cc: "Wim Van Sebroeck" <wim@iguana.be>,
linux-kernel@vger.kernel.org,
"Timo Kokkonen" <timo.kokkonen@offcode.fi>,
"Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>,
linux-doc@vger.kernel.org,
"Doug Anderson" <dianders@chromium.org>,
"Jonathan Corbet" <corbet@lwn.net>,
"Guenter Roeck" <linux@roeck-us.net>
Subject: [PATCH v8 06/10] watchdog: dw_wdt: Convert to use watchdog infrastructure
Date: Sun, 28 Feb 2016 13:12:19 -0800 [thread overview]
Message-ID: <1456693943-6876-7-git-send-email-linux@roeck-us.net> (raw)
In-Reply-To: <1456693943-6876-1-git-send-email-linux@roeck-us.net>
Convert driver to use watchdog infrastructure. This includes
infrastructure support to handle watchdog keepalive if the watchdog
is running while the watchdog device is closed.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
---
v8: max_hw_timeout_ms -> max_hw_heartbeat_ms
Rebased to v4.5-rc5
v7: Set max_hw_timeout_ms
Rebased to v4.5-rc1
v6: Added patch
---
drivers/watchdog/Kconfig | 1 +
drivers/watchdog/dw_wdt.c | 323 +++++++++++++++++-----------------------------
2 files changed, 117 insertions(+), 207 deletions(-)
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 0f6d8515ba4f..e9c025fa3fe4 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -330,6 +330,7 @@ config SA1100_WATCHDOG
config DW_WATCHDOG
tristate "Synopsys DesignWare watchdog"
depends on HAS_IOMEM
+ select WATCHDOG_CORE
help
Say Y here if to include support for the Synopsys DesignWare
watchdog timer found in many chips.
diff --git a/drivers/watchdog/dw_wdt.c b/drivers/watchdog/dw_wdt.c
index 8fefa4ad46d4..2acb51cf5504 100644
--- a/drivers/watchdog/dw_wdt.c
+++ b/drivers/watchdog/dw_wdt.c
@@ -12,9 +12,8 @@
* and these are a function of the input clock frequency.
*
* The DesignWare watchdog cannot be stopped once it has been started so we
- * use a software timer to implement a ping that will keep the watchdog alive.
- * If we receive an expected close for the watchdog then we keep the timer
- * running, otherwise the timer is stopped and the watchdog will expire.
+ * do not implement a stop function. The watchdog core will continue to send
+ * heartbeat requests after the watchdog device has been closed.
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
@@ -22,12 +21,9 @@
#include <linux/bitops.h>
#include <linux/clk.h>
#include <linux/delay.h>
-#include <linux/device.h>
#include <linux/err.h>
-#include <linux/fs.h>
#include <linux/io.h>
#include <linux/kernel.h>
-#include <linux/miscdevice.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/notifier.h>
@@ -35,8 +31,6 @@
#include <linux/pm.h>
#include <linux/platform_device.h>
#include <linux/reboot.h>
-#include <linux/timer.h>
-#include <linux/uaccess.h>
#include <linux/watchdog.h>
#define WDOG_CONTROL_REG_OFFSET 0x00
@@ -57,53 +51,50 @@ module_param(nowayout, bool, 0);
MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started "
"(default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
-#define WDT_TIMEOUT (HZ / 2)
-
-static struct {
+struct dw_wdt {
void __iomem *regs;
struct clk *clk;
- unsigned long in_use;
- unsigned long next_heartbeat;
- struct timer_list timer;
- int expect_close;
struct notifier_block restart_handler;
-} dw_wdt;
+ struct watchdog_device wdd;
+};
+
+#define to_dw_wdt(wdd) container_of(wdd, struct dw_wdt, wdd)
-static inline int dw_wdt_is_enabled(void)
+static inline int dw_wdt_is_enabled(struct dw_wdt *dw_wdt)
{
- return readl(dw_wdt.regs + WDOG_CONTROL_REG_OFFSET) &
+ return readl(dw_wdt->regs + WDOG_CONTROL_REG_OFFSET) &
WDOG_CONTROL_REG_WDT_EN_MASK;
}
-static inline int dw_wdt_top_in_seconds(unsigned top)
+static inline int dw_wdt_top_in_seconds(struct dw_wdt *dw_wdt, unsigned top)
{
/*
* There are 16 possible timeout values in 0..15 where the number of
* cycles is 2 ^ (16 + i) and the watchdog counts down.
*/
- return (1U << (16 + top)) / clk_get_rate(dw_wdt.clk);
+ return (1U << (16 + top)) / clk_get_rate(dw_wdt->clk);
}
-static int dw_wdt_get_top(void)
+static int dw_wdt_get_top(struct dw_wdt *dw_wdt)
{
- int top = readl(dw_wdt.regs + WDOG_TIMEOUT_RANGE_REG_OFFSET) & 0xF;
+ int top = readl(dw_wdt->regs + WDOG_TIMEOUT_RANGE_REG_OFFSET) & 0xF;
- return dw_wdt_top_in_seconds(top);
+ return dw_wdt_top_in_seconds(dw_wdt, top);
}
-static inline void dw_wdt_set_next_heartbeat(void)
+static int dw_wdt_ping(struct watchdog_device *wdd)
{
- dw_wdt.next_heartbeat = jiffies + dw_wdt_get_top() * HZ;
-}
+ struct dw_wdt *dw_wdt = to_dw_wdt(wdd);
-static void dw_wdt_keepalive(void)
-{
- writel(WDOG_COUNTER_RESTART_KICK_VALUE, dw_wdt.regs +
+ writel(WDOG_COUNTER_RESTART_KICK_VALUE, dw_wdt->regs +
WDOG_COUNTER_RESTART_REG_OFFSET);
+
+ return 0;
}
-static int dw_wdt_set_top(unsigned top_s)
+static int dw_wdt_set_timeout(struct watchdog_device *wdd, unsigned int top_s)
{
+ struct dw_wdt *dw_wdt = to_dw_wdt(wdd);
int i, top_val = DW_WDT_MAX_TOP;
/*
@@ -111,7 +102,7 @@ static int dw_wdt_set_top(unsigned top_s)
* always look for >=.
*/
for (i = 0; i <= DW_WDT_MAX_TOP; ++i)
- if (dw_wdt_top_in_seconds(i) >= top_s) {
+ if (dw_wdt_top_in_seconds(dw_wdt, i) >= top_s) {
top_val = i;
break;
}
@@ -123,33 +114,43 @@ static int dw_wdt_set_top(unsigned top_s)
* effectively get a pat of the watchdog right here.
*/
writel(top_val | top_val << WDOG_TIMEOUT_RANGE_TOPINIT_SHIFT,
- dw_wdt.regs + WDOG_TIMEOUT_RANGE_REG_OFFSET);
+ dw_wdt->regs + WDOG_TIMEOUT_RANGE_REG_OFFSET);
- /*
- * Add an explicit pat to handle versions of the watchdog that
- * don't have TOPINIT. This won't hurt on versions that have
- * it.
- */
- dw_wdt_keepalive();
+ wdd->timeout = dw_wdt_top_in_seconds(dw_wdt, top_val);
- dw_wdt_set_next_heartbeat();
+ return 0;
+}
+
+static int dw_wdt_start(struct watchdog_device *wdd)
+{
+ struct dw_wdt *dw_wdt = to_dw_wdt(wdd);
+
+ dw_wdt_set_timeout(wdd, wdd->timeout);
- return dw_wdt_top_in_seconds(top_val);
+ set_bit(WDOG_HW_RUNNING, &wdd->status);
+
+ writel(WDOG_CONTROL_REG_WDT_EN_MASK,
+ dw_wdt->regs + WDOG_CONTROL_REG_OFFSET);
+
+ return 0;
}
static int dw_wdt_restart_handle(struct notifier_block *this,
- unsigned long mode, void *cmd)
+ unsigned long mode, void *cmd)
{
+ struct dw_wdt *dw_wdt;
u32 val;
- writel(0, dw_wdt.regs + WDOG_TIMEOUT_RANGE_REG_OFFSET);
- val = readl(dw_wdt.regs + WDOG_CONTROL_REG_OFFSET);
+ dw_wdt = container_of(this, struct dw_wdt, restart_handler);
+
+ writel(0, dw_wdt->regs + WDOG_TIMEOUT_RANGE_REG_OFFSET);
+ val = readl(dw_wdt->regs + WDOG_CONTROL_REG_OFFSET);
if (val & WDOG_CONTROL_REG_WDT_EN_MASK)
- writel(WDOG_COUNTER_RESTART_KICK_VALUE, dw_wdt.regs +
- WDOG_COUNTER_RESTART_REG_OFFSET);
+ writel(WDOG_COUNTER_RESTART_KICK_VALUE,
+ dw_wdt->regs + WDOG_COUNTER_RESTART_REG_OFFSET);
else
writel(WDOG_CONTROL_REG_WDT_EN_MASK,
- dw_wdt.regs + WDOG_CONTROL_REG_OFFSET);
+ dw_wdt->regs + WDOG_CONTROL_REG_OFFSET);
/* wait for reset to assert... */
mdelay(500);
@@ -157,74 +158,12 @@ static int dw_wdt_restart_handle(struct notifier_block *this,
return NOTIFY_DONE;
}
-static void dw_wdt_ping(unsigned long data)
+static unsigned int dw_wdt_get_timeleft(struct watchdog_device *wdd)
{
- if (time_before(jiffies, dw_wdt.next_heartbeat) ||
- (!nowayout && !dw_wdt.in_use)) {
- dw_wdt_keepalive();
- mod_timer(&dw_wdt.timer, jiffies + WDT_TIMEOUT);
- } else
- pr_crit("keepalive missed, machine will reset\n");
-}
-
-static int dw_wdt_open(struct inode *inode, struct file *filp)
-{
- if (test_and_set_bit(0, &dw_wdt.in_use))
- return -EBUSY;
-
- /* Make sure we don't get unloaded. */
- __module_get(THIS_MODULE);
-
- if (!dw_wdt_is_enabled()) {
- /*
- * The watchdog is not currently enabled. Set the timeout to
- * something reasonable and then start it.
- */
- dw_wdt_set_top(DW_WDT_DEFAULT_SECONDS);
- writel(WDOG_CONTROL_REG_WDT_EN_MASK,
- dw_wdt.regs + WDOG_CONTROL_REG_OFFSET);
- }
-
- dw_wdt_set_next_heartbeat();
-
- return nonseekable_open(inode, filp);
-}
-
-static ssize_t dw_wdt_write(struct file *filp, const char __user *buf,
- size_t len, loff_t *offset)
-{
- if (!len)
- return 0;
-
- if (!nowayout) {
- size_t i;
-
- dw_wdt.expect_close = 0;
-
- for (i = 0; i < len; ++i) {
- char c;
-
- if (get_user(c, buf + i))
- return -EFAULT;
-
- if (c == 'V') {
- dw_wdt.expect_close = 1;
- break;
- }
- }
- }
+ struct dw_wdt *dw_wdt = to_dw_wdt(wdd);
- dw_wdt_set_next_heartbeat();
- dw_wdt_keepalive();
- mod_timer(&dw_wdt.timer, jiffies + WDT_TIMEOUT);
-
- return len;
-}
-
-static u32 dw_wdt_time_left(void)
-{
- return readl(dw_wdt.regs + WDOG_CURRENT_COUNT_REG_OFFSET) /
- clk_get_rate(dw_wdt.clk);
+ return readl(dw_wdt->regs + WDOG_CURRENT_COUNT_REG_OFFSET) /
+ clk_get_rate(dw_wdt->clk);
}
static const struct watchdog_info dw_wdt_ident = {
@@ -233,78 +172,33 @@ static const struct watchdog_info dw_wdt_ident = {
.identity = "Synopsys DesignWare Watchdog",
};
-static long dw_wdt_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
-{
- unsigned long val;
- int timeout;
-
- switch (cmd) {
- case WDIOC_GETSUPPORT:
- return copy_to_user((void __user *)arg, &dw_wdt_ident,
- sizeof(dw_wdt_ident)) ? -EFAULT : 0;
-
- case WDIOC_GETSTATUS:
- case WDIOC_GETBOOTSTATUS:
- return put_user(0, (int __user *)arg);
-
- case WDIOC_KEEPALIVE:
- dw_wdt_set_next_heartbeat();
- return 0;
-
- case WDIOC_SETTIMEOUT:
- if (get_user(val, (int __user *)arg))
- return -EFAULT;
- timeout = dw_wdt_set_top(val);
- return put_user(timeout , (int __user *)arg);
-
- case WDIOC_GETTIMEOUT:
- return put_user(dw_wdt_get_top(), (int __user *)arg);
-
- case WDIOC_GETTIMELEFT:
- /* Get the time left until expiry. */
- if (get_user(val, (int __user *)arg))
- return -EFAULT;
- return put_user(dw_wdt_time_left(), (int __user *)arg);
-
- default:
- return -ENOTTY;
- }
-}
-
-static int dw_wdt_release(struct inode *inode, struct file *filp)
-{
- clear_bit(0, &dw_wdt.in_use);
-
- if (!dw_wdt.expect_close) {
- del_timer(&dw_wdt.timer);
-
- if (!nowayout)
- pr_crit("unexpected close, system will reboot soon\n");
- else
- pr_crit("watchdog cannot be disabled, system will reboot soon\n");
- }
-
- dw_wdt.expect_close = 0;
-
- return 0;
-}
+static const struct watchdog_ops dw_wdt_ops = {
+ .owner = THIS_MODULE,
+ .start = dw_wdt_start,
+ .ping = dw_wdt_ping,
+ .set_timeout = dw_wdt_set_timeout,
+ .get_timeleft = dw_wdt_get_timeleft,
+};
#ifdef CONFIG_PM_SLEEP
static int dw_wdt_suspend(struct device *dev)
{
- clk_disable_unprepare(dw_wdt.clk);
+ struct dw_wdt *dw_wdt = dev_get_drvdata(dev);
+
+ clk_disable_unprepare(dw_wdt->clk);
return 0;
}
static int dw_wdt_resume(struct device *dev)
{
- int err = clk_prepare_enable(dw_wdt.clk);
+ struct dw_wdt *dw_wdt = dev_get_drvdata(dev);
+ int err = clk_prepare_enable(dw_wdt->clk);
if (err)
return err;
- dw_wdt_keepalive();
+ dw_wdt_ping(&dw_wdt->wdd);
return 0;
}
@@ -312,67 +206,82 @@ static int dw_wdt_resume(struct device *dev)
static SIMPLE_DEV_PM_OPS(dw_wdt_pm_ops, dw_wdt_suspend, dw_wdt_resume);
-static const struct file_operations wdt_fops = {
- .owner = THIS_MODULE,
- .llseek = no_llseek,
- .open = dw_wdt_open,
- .write = dw_wdt_write,
- .unlocked_ioctl = dw_wdt_ioctl,
- .release = dw_wdt_release
-};
-
-static struct miscdevice dw_wdt_miscdev = {
- .fops = &wdt_fops,
- .name = "watchdog",
- .minor = WATCHDOG_MINOR,
-};
-
static int dw_wdt_drv_probe(struct platform_device *pdev)
{
+ struct device *dev = &pdev->dev;
+ struct watchdog_device *wdd;
+ struct dw_wdt *dw_wdt;
+ struct resource *mem;
int ret;
- struct resource *mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- dw_wdt.regs = devm_ioremap_resource(&pdev->dev, mem);
- if (IS_ERR(dw_wdt.regs))
- return PTR_ERR(dw_wdt.regs);
+ dw_wdt = devm_kzalloc(dev, sizeof(*dw_wdt), GFP_KERNEL);
+ if (!dw_wdt)
+ return -ENOMEM;
+
+ mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ dw_wdt->regs = devm_ioremap_resource(dev, mem);
+ if (IS_ERR(dw_wdt->regs))
+ return PTR_ERR(dw_wdt->regs);
- dw_wdt.clk = devm_clk_get(&pdev->dev, NULL);
- if (IS_ERR(dw_wdt.clk))
- return PTR_ERR(dw_wdt.clk);
+ dw_wdt->clk = devm_clk_get(dev, NULL);
+ if (IS_ERR(dw_wdt->clk))
+ return PTR_ERR(dw_wdt->clk);
- ret = clk_prepare_enable(dw_wdt.clk);
+ ret = clk_prepare_enable(dw_wdt->clk);
if (ret)
return ret;
- ret = misc_register(&dw_wdt_miscdev);
+ wdd = &dw_wdt->wdd;
+ wdd->info = &dw_wdt_ident;
+ wdd->ops = &dw_wdt_ops;
+ wdd->min_timeout = 1;
+ wdd->max_hw_heartbeat_ms =
+ dw_wdt_top_in_seconds(dw_wdt, DW_WDT_MAX_TOP) * 1000;
+ wdd->parent = dev;
+
+ watchdog_set_drvdata(wdd, dw_wdt);
+ watchdog_set_nowayout(wdd, nowayout);
+ watchdog_init_timeout(wdd, 0, dev);
+
+ /*
+ * If the watchdog is already running, use its already configured
+ * timeout. Otherwise use the default or the value provided through
+ * devicetree.
+ */
+ if (dw_wdt_is_enabled(dw_wdt)) {
+ wdd->timeout = dw_wdt_get_top(dw_wdt);
+ set_bit(WDOG_HW_RUNNING, &wdd->status);
+ } else {
+ wdd->timeout = DW_WDT_DEFAULT_SECONDS;
+ watchdog_init_timeout(wdd, 0, dev);
+ }
+
+ platform_set_drvdata(pdev, dw_wdt);
+
+ ret = watchdog_register_device(wdd);
if (ret)
goto out_disable_clk;
- dw_wdt.restart_handler.notifier_call = dw_wdt_restart_handle;
- dw_wdt.restart_handler.priority = 128;
- ret = register_restart_handler(&dw_wdt.restart_handler);
+ dw_wdt->restart_handler.notifier_call = dw_wdt_restart_handle;
+ dw_wdt->restart_handler.priority = 128;
+ ret = register_restart_handler(&dw_wdt->restart_handler);
if (ret)
pr_warn("cannot register restart handler\n");
- dw_wdt_set_next_heartbeat();
- setup_timer(&dw_wdt.timer, dw_wdt_ping, 0);
- mod_timer(&dw_wdt.timer, jiffies + WDT_TIMEOUT);
-
return 0;
out_disable_clk:
- clk_disable_unprepare(dw_wdt.clk);
-
+ clk_disable_unprepare(dw_wdt->clk);
return ret;
}
static int dw_wdt_drv_remove(struct platform_device *pdev)
{
- unregister_restart_handler(&dw_wdt.restart_handler);
-
- misc_deregister(&dw_wdt_miscdev);
+ struct dw_wdt *dw_wdt = platform_get_drvdata(pdev);
- clk_disable_unprepare(dw_wdt.clk);
+ unregister_restart_handler(&dw_wdt->restart_handler);
+ watchdog_unregister_device(&dw_wdt->wdd);
+ clk_disable_unprepare(dw_wdt->clk);
return 0;
}
--
2.5.0
next prev parent reply other threads:[~2016-02-28 21:12 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-28 21:12 [PATCH v8 0/10] watchdog: Add support for keepalives triggered by infrastructure Guenter Roeck
2016-02-28 21:12 ` [PATCH v8 01/10] watchdog: Make set_timeout function optional Guenter Roeck
2016-02-28 21:12 ` [PATCH v8 02/10] watchdog: Introduce hardware maximum heartbeat in watchdog core Guenter Roeck
2016-02-28 21:12 ` [PATCH v8 03/10] watchdog: Introduce WDOG_HW_RUNNING flag Guenter Roeck
2016-02-28 21:12 ` [PATCH v8 04/10] watchdog: Make stop function optional Guenter Roeck
2016-02-28 21:12 ` [PATCH v8 05/10] watchdog: Add support for minimum time between heartbeats Guenter Roeck
2016-02-28 21:12 ` Guenter Roeck [this message]
2016-03-01 22:59 ` [PATCH v8 06/10] watchdog: dw_wdt: Convert to use watchdog infrastructure Doug Anderson
2016-03-02 19:39 ` Guenter Roeck
2016-02-28 21:12 ` [PATCH v8 07/10] watchdog: imx2: Convert to use infrastructure triggered keepalives Guenter Roeck
2016-02-28 21:12 ` [RFC PATCH v8 08/10] watchdog: retu: " Guenter Roeck
2016-02-28 21:12 ` [RFC PATCH v8 09/10] watchdog: at91sam9: " Guenter Roeck
2016-02-28 21:12 ` [RFC PATCH v8 10/10] watchdog: gpio: " Guenter Roeck
2016-03-06 10:49 ` [PATCH v8 0/10] watchdog: Add support for keepalives triggered by infrastructure Wim Van Sebroeck
2016-03-07 17:37 ` Guenter Roeck
2016-03-07 18:50 ` Wim Van Sebroeck
2016-03-08 0:39 ` Guenter Roeck
2016-03-07 3:03 ` Guenter Roeck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1456693943-6876-7-git-send-email-linux@roeck-us.net \
--to=linux@roeck-us.net \
--cc=corbet@lwn.net \
--cc=dianders@chromium.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-watchdog@vger.kernel.org \
--cc=timo.kokkonen@offcode.fi \
--cc=u.kleine-koenig@pengutronix.de \
--cc=wim@iguana.be \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).