linux-watchdog.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Wolfram Sang <wsa@the-dreams.de>
To: linux-watchdog@vger.kernel.org
Cc: Wolfram Sang <wsa@the-dreams.de>, linux-renesas-soc@vger.kernel.org
Subject: [PATCH v2 1/4] watchdog: renesas-wdt: add driver
Date: Fri,  1 Apr 2016 13:56:23 +0200	[thread overview]
Message-ID: <1459511786-4286-2-git-send-email-wsa@the-dreams.de> (raw)
In-Reply-To: <1459511786-4286-1-git-send-email-wsa@the-dreams.de>

From: Wolfram Sang <wsa+renesas@sang-engineering.com>

Add support for watchdogs (RWDT and SWDT) found on RCar Gen3 based SoCs
from Renesas.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
---
 .../devicetree/bindings/watchdog/renesas-wdt.txt   |  25 +++
 drivers/watchdog/Kconfig                           |   8 +
 drivers/watchdog/Makefile                          |   1 +
 drivers/watchdog/renesas_wdt.c                     | 213 +++++++++++++++++++++
 4 files changed, 247 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/watchdog/renesas-wdt.txt
 create mode 100644 drivers/watchdog/renesas_wdt.c

diff --git a/Documentation/devicetree/bindings/watchdog/renesas-wdt.txt b/Documentation/devicetree/bindings/watchdog/renesas-wdt.txt
new file mode 100644
index 00000000000000..b9512f1eb80a02
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/renesas-wdt.txt
@@ -0,0 +1,25 @@
+Renesas Watchdog Timer (WDT) Controller
+
+Required properties:
+- compatible : Should be "renesas,r8a7795-wdt", or "renesas,rcar-gen3-wdt"
+
+  When compatible with the generic version, nodes must list the SoC-specific
+  version corresponding to the platform first, followed by the generic
+  version.
+
+- reg : Should contain WDT registers location and length
+- clocks : the clock feeding the watchdog timer.
+
+Optional properties:
+- timeout-sec : Contains the watchdog timeout in seconds
+- power-domains : the power domain the WDT belongs to
+
+Examples:
+
+	wdt0: watchdog@e6020000 {
+		compatible = "renesas,r8a7795-wdt", "renesas,rcar-gen3-wdt";
+		reg = <0 0xe6020000 0 0x0c>;
+		clocks = <&cpg CPG_MOD 402>;
+		power-domains = <&cpg>;
+		timeout-sec = <60>;
+	};
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index fb947655badd02..3902c9ca7f099d 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -661,6 +661,14 @@ config ATLAS7_WATCHDOG
 	  To compile this driver as a module, choose M here: the
 	  module will be called atlas7_wdt.
 
+config RENESAS_WDT
+	tristate "Renesas WDT Watchdog"
+	depends on ARCH_RENESAS || COMPILE_TEST
+	select WATCHDOG_CORE
+	help
+	  This driver adds watchdog support for the integrated watchdogs in the
+	  Renesas R-Car and other SH-Mobile SoCs (usually named RWDT or SWDT).
+
 # AVR32 Architecture
 
 config AT32AP700X_WDT
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index feb6270fdbde5f..2cbc9709852d0e 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -73,6 +73,7 @@ obj-$(CONFIG_DIGICOLOR_WATCHDOG) += digicolor_wdt.o
 obj-$(CONFIG_LPC18XX_WATCHDOG) += lpc18xx_wdt.o
 obj-$(CONFIG_BCM7038_WDT) += bcm7038_wdt.o
 obj-$(CONFIG_ATLAS7_WATCHDOG) += atlas7_wdt.o
+obj-$(CONFIG_RENESAS_WDT) += renesas_wdt.o
 
 # AVR32 Architecture
 obj-$(CONFIG_AT32AP700X_WDT) += at32ap700x_wdt.o
diff --git a/drivers/watchdog/renesas_wdt.c b/drivers/watchdog/renesas_wdt.c
new file mode 100644
index 00000000000000..cf61c92f7ecd63
--- /dev/null
+++ b/drivers/watchdog/renesas_wdt.c
@@ -0,0 +1,213 @@
+/*
+ * Watchdog driver for Renesas WDT watchdog
+ *
+ * Copyright (C) 2015-16 Wolfram Sang, Sang Engineering <wsa@sang-engineering.com>
+ * Copyright (C) 2015-16 Renesas Electronics Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#include <linux/bitops.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/watchdog.h>
+
+#define RWTCNT		0
+#define RWTCSRA		4
+#define RWTCSRA_WOVF	BIT(4)
+#define RWTCSRA_WRFLG	BIT(5)
+#define RWTCSRA_TME	BIT(7)
+
+#define RWDT_DEFAULT_TIMEOUT 60U
+
+static const unsigned int clk_divs[] = { 1, 4, 16, 32, 64, 128, 1024 };
+
+static bool nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, bool, 0);
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
+				__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+struct rwdt_priv {
+	void __iomem *base;
+	struct watchdog_device wdev;
+	struct clk *clk;
+	unsigned int clks_per_sec;
+	u8 cks;
+};
+
+static void rwdt_write(struct rwdt_priv *priv, u32 val, unsigned int reg)
+{
+	if (reg == RWTCNT)
+		val |= 0x5a5a0000;
+	else
+		val |= 0xa5a5a500;
+
+	writel_relaxed(val, priv->base + reg);
+}
+
+static int rwdt_init_timeout(struct watchdog_device *wdev)
+{
+	struct rwdt_priv *priv = watchdog_get_drvdata(wdev);
+
+	rwdt_write(priv, 65536 - wdev->timeout * priv->clks_per_sec, RWTCNT);
+
+	return 0;
+}
+
+static int rwdt_start(struct watchdog_device *wdev)
+{
+	struct rwdt_priv *priv = watchdog_get_drvdata(wdev);
+
+	clk_prepare_enable(priv->clk);
+
+	rwdt_write(priv, priv->cks, RWTCSRA);
+	rwdt_init_timeout(wdev);
+
+	while (readb_relaxed(priv->base + RWTCSRA) & RWTCSRA_WRFLG)
+		cpu_relax();
+
+	rwdt_write(priv, priv->cks | RWTCSRA_TME, RWTCSRA);
+
+	return 0;
+}
+
+static int rwdt_stop(struct watchdog_device *wdev)
+{
+	struct rwdt_priv *priv = watchdog_get_drvdata(wdev);
+
+	rwdt_write(priv, priv->cks, RWTCSRA);
+	clk_disable_unprepare(priv->clk);
+
+	return 0;
+}
+
+static unsigned int rwdt_get_timeleft(struct watchdog_device *wdev)
+{
+	struct rwdt_priv *priv = watchdog_get_drvdata(wdev);
+	u16 val = readw_relaxed(priv->base + RWTCNT);
+
+	return DIV_ROUND_CLOSEST(65536 - val, priv->clks_per_sec);
+}
+
+static const struct watchdog_info rwdt_ident = {
+	.options = WDIOF_MAGICCLOSE | WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT,
+	.identity = "Renesas WDT Watchdog",
+};
+
+static const struct watchdog_ops rwdt_ops = {
+	.owner = THIS_MODULE,
+	.start = rwdt_start,
+	.stop = rwdt_stop,
+	.ping = rwdt_init_timeout,
+	.get_timeleft = rwdt_get_timeleft,
+};
+
+static int rwdt_probe(struct platform_device *pdev)
+{
+	struct rwdt_priv *priv;
+	struct resource *res;
+	unsigned long rate;
+	unsigned int clks_per_sec;
+	int ret, i;
+
+	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	priv->base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(priv->base))
+		return PTR_ERR(priv->base);
+
+	priv->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(priv->clk))
+		return PTR_ERR(priv->clk);
+
+	rate = clk_get_rate(priv->clk);
+	if (!rate)
+		return -ENOENT;
+
+	for (i = ARRAY_SIZE(clk_divs) - 1; i >= 0; i--) {
+		clks_per_sec = DIV_ROUND_UP(rate, clk_divs[i]);
+		if (clks_per_sec) {
+			priv->clks_per_sec = clks_per_sec;
+			priv->cks = i;
+			break;
+		}
+	}
+
+	if (!clks_per_sec) {
+		dev_err(&pdev->dev, "Can't find suitable clock divider\n");
+		return -ERANGE;
+	}
+
+	pm_runtime_enable(&pdev->dev);
+	pm_runtime_get_sync(&pdev->dev);
+
+	priv->wdev.info = &rwdt_ident,
+	priv->wdev.ops = &rwdt_ops,
+	priv->wdev.parent = &pdev->dev;
+	priv->wdev.min_timeout = 1;
+	priv->wdev.max_timeout = 65536 / clks_per_sec;
+	priv->wdev.timeout = min(priv->wdev.max_timeout, RWDT_DEFAULT_TIMEOUT);
+
+	platform_set_drvdata(pdev, priv);
+	watchdog_set_drvdata(&priv->wdev, priv);
+	watchdog_set_nowayout(&priv->wdev, nowayout);
+
+	/* This overrides the default timeout only if DT configuration was found */
+	ret = watchdog_init_timeout(&priv->wdev, 0, &pdev->dev);
+	if (ret)
+		dev_warn(&pdev->dev, "Specified timeout value invalid, using default\n");
+
+	ret = watchdog_register_device(&priv->wdev);
+	if (ret < 0) {
+		pm_runtime_put(&pdev->dev);
+		pm_runtime_disable(&pdev->dev);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int rwdt_remove(struct platform_device *pdev)
+{
+	struct rwdt_priv *priv = platform_get_drvdata(pdev);
+
+	watchdog_unregister_device(&priv->wdev);
+	pm_runtime_put(&pdev->dev);
+	pm_runtime_disable(&pdev->dev);
+
+	return 0;
+}
+
+/*
+ * This driver does also fit for R-Car Gen2 (r8a779[0-4]) WDT. However, for SMP
+ * to work there, one also needs a RESET (RST) driver which does not exist yet
+ * due to HW issues. This needs to be solved before adding compatibles here.
+ */
+static const struct of_device_id rwdt_ids[] = {
+	{ .compatible = "renesas,rcar-gen3-wdt", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, rwdt_ids);
+
+static struct platform_driver rwdt_driver = {
+	.driver = {
+		.name = "renesas_wdt",
+		.of_match_table = rwdt_ids,
+	},
+	.probe = rwdt_probe,
+	.remove = rwdt_remove,
+};
+module_platform_driver(rwdt_driver);
+
+MODULE_DESCRIPTION("Renesas WDT Watchdog Driver");
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Wolfram Sang <wsa@sang-engineering.com>");
-- 
2.7.0


  reply	other threads:[~2016-04-01 11:56 UTC|newest]

Thread overview: 31+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-04-01 11:56 [PATCH v2 0/4] watchdog: add driver for Renesas Gen3 WDT watchdogs Wolfram Sang
2016-04-01 11:56 ` Wolfram Sang [this message]
     [not found]   ` <57010C13.7040007@rempel-privat.de>
     [not found]     ` <20160404104508.GA1383@katana>
     [not found]       ` <57025C5A.2060704@de.bosch.com>
2016-04-04 12:36         ` [PATCH v2 1/4] watchdog: renesas-wdt: add driver Wolfram Sang
2016-04-04 14:08           ` Guenter Roeck
     [not found]             ` <57035A6A.3020601@de.bosch.com>
2016-04-05 18:47               ` Guenter Roeck
     [not found]                 ` <5704A10C.10701@de.bosch.com>
2016-04-06 15:36                   ` Guenter Roeck
2016-04-01 11:56 ` [PATCH v2 2/4] arm64: dts: r8a7795: Add RWDT node Wolfram Sang
2016-04-04  8:41   ` Geert Uytterhoeven
2016-04-04 14:00   ` Guenter Roeck
2016-04-04 14:06     ` Wolfram Sang
2016-05-18  9:38     ` Wolfram Sang
2016-05-20  4:13       ` Simon Horman
2016-04-01 11:56 ` [PATCH v2 3/4] arm64: dts: salvator-x: Enable watchdog timer Wolfram Sang
2016-04-04  8:44   ` Geert Uytterhoeven
2016-04-04 14:01   ` Guenter Roeck
2016-05-18  9:39     ` Wolfram Sang
2016-05-20  4:13       ` Simon Horman
2016-04-01 11:56 ` [PATCH v2 4/4] arm64: defconfig: enable Renesas Watchdog Timer Wolfram Sang
2016-04-04  8:45   ` Geert Uytterhoeven
2016-04-04 14:05   ` Guenter Roeck
2016-04-04 14:51 ` [PATCH v2 0/4] watchdog: add driver for Renesas Gen3 WDT watchdogs Geert Uytterhoeven
2016-04-04 14:59   ` Wolfram Sang
2016-04-04 15:21     ` Geert Uytterhoeven
2016-04-04 15:23       ` Wolfram Sang
2016-04-04 15:25       ` Guenter Roeck
2016-04-04 17:02         ` Geert Uytterhoeven
2016-04-04 17:52           ` Guenter Roeck
2016-04-04 18:14             ` Geert Uytterhoeven
2016-04-04 18:23               ` Guenter Roeck
2016-04-04 19:12               ` Wolfram Sang
2016-05-14 16:45 ` Wim Van Sebroeck

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1459511786-4286-2-git-send-email-wsa@the-dreams.de \
    --to=wsa@the-dreams.de \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=linux-watchdog@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).