From: Thomas Pedersen <twp@codeaurora.org>
To: linux-watchdog@vger.kernel.org
Cc: Matthew McClintock <mmcclint@codeaurora.org>,
Thomas Pedersen <twp@codeaurora.org>,
Wim Van Sebroeck <wim@iguana.be>,
Guenter Roeck <linux@roeck-us.net>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Andy Gross <andy.gross@linaro.org>,
David Brown <david.brown@linaro.org>,
Russell King <linux@armlinux.org.uk>
Subject: [PATCH v3 2/3] watchdog: qcom: add option for standalone watchdog not in timer block
Date: Wed, 29 Jun 2016 10:50:01 -0700 [thread overview]
Message-ID: <1467222602-18362-2-git-send-email-twp@codeaurora.org> (raw)
In-Reply-To: <1467222602-18362-1-git-send-email-twp@codeaurora.org>
From: Matthew McClintock <mmcclint@codeaurora.org>
Commit 0dfd582e026a ("watchdog: qcom: use timer devicetree
binding") moved to use the watchdog as a subset timer
register block. Some devices have the watchdog completely
standalone with slightly different register offsets as
well so let's account for the differences here.
The existing "kpss-standalone" compatible string doesn't
make it entirely clear exactly what the device is so
rename to "kpss-wdt" to reflect watchdog timer
functionality. Also update ipq4019 DTS with an SoC
specific compatible.
Signed-off-by: Matthew McClintock <mmcclint@codeaurora.org>
Signed-off-by: Thomas Pedersen <twp@codeaurora.org>
---
v2:
use of_device_get_match_data()
v3:
rename kpss-standalone to kpss-wdt
add ipq4019 specific compatible
---
.../devicetree/bindings/watchdog/qcom-wdt.txt | 2 +
arch/arm/boot/dts/qcom-ipq4019.dtsi | 2 +-
drivers/watchdog/qcom-wdt.c | 64 ++++++++++++++++------
3 files changed, 51 insertions(+), 17 deletions(-)
diff --git a/Documentation/devicetree/bindings/watchdog/qcom-wdt.txt b/Documentation/devicetree/bindings/watchdog/qcom-wdt.txt
index 6b7b5ce..41aeaa2 100644
--- a/Documentation/devicetree/bindings/watchdog/qcom-wdt.txt
+++ b/Documentation/devicetree/bindings/watchdog/qcom-wdt.txt
@@ -7,8 +7,10 @@ Required properties :
"qcom,kpss-wdt-msm8960"
"qcom,kpss-wdt-apq8064"
"qcom,kpss-wdt-ipq8064"
+ "qcom,kpss-wdt-ipq4019"
"qcom,kpss-timer"
"qcom,scss-timer"
+ "qcom,kpss-wdt"
- reg : shall contain base register location and length
- clocks : shall contain the input clock
diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi
index 5c08d19..e625656 100644
--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
@@ -252,7 +252,7 @@
};
watchdog@b017000 {
- compatible = "qcom,kpss-standalone";
+ compatible = "qcom,kpss-wdt", "qcom,kpss-wdt-ipq4019";
reg = <0xb017000 0x40>;
clocks = <&sleep_clk>;
timeout-sec = <10>;
diff --git a/drivers/watchdog/qcom-wdt.c b/drivers/watchdog/qcom-wdt.c
index a043fa4..111e8a7 100644
--- a/drivers/watchdog/qcom-wdt.c
+++ b/drivers/watchdog/qcom-wdt.c
@@ -18,19 +18,42 @@
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/watchdog.h>
+#include <linux/of_device.h>
-#define WDT_RST 0x38
-#define WDT_EN 0x40
-#define WDT_STS 0x44
-#define WDT_BITE_TIME 0x5C
+enum wdt_reg {
+ WDT_RST,
+ WDT_EN,
+ WDT_STS,
+ WDT_BITE_TIME,
+};
+
+static const u32 reg_offset_data_apcs_tmr[] = {
+ [WDT_RST] = 0x38,
+ [WDT_EN] = 0x40,
+ [WDT_STS] = 0x44,
+ [WDT_BITE_TIME] = 0x5C,
+};
+
+static const u32 reg_offset_data_kpss[] = {
+ [WDT_RST] = 0x4,
+ [WDT_EN] = 0x8,
+ [WDT_STS] = 0xC,
+ [WDT_BITE_TIME] = 0x14,
+};
struct qcom_wdt {
struct watchdog_device wdd;
struct clk *clk;
unsigned long rate;
void __iomem *base;
+ const u32 *layout;
};
+static void __iomem *wdt_addr(struct qcom_wdt *wdt, enum wdt_reg reg)
+{
+ return wdt->base + wdt->layout[reg];
+}
+
static inline
struct qcom_wdt *to_qcom_wdt(struct watchdog_device *wdd)
{
@@ -41,10 +64,10 @@ static int qcom_wdt_start(struct watchdog_device *wdd)
{
struct qcom_wdt *wdt = to_qcom_wdt(wdd);
- writel(0, wdt->base + WDT_EN);
- writel(1, wdt->base + WDT_RST);
- writel(wdd->timeout * wdt->rate, wdt->base + WDT_BITE_TIME);
- writel(1, wdt->base + WDT_EN);
+ writel(0, wdt_addr(wdt, WDT_EN));
+ writel(1, wdt_addr(wdt, WDT_RST));
+ writel(wdd->timeout * wdt->rate, wdt_addr(wdt, WDT_BITE_TIME));
+ writel(1, wdt_addr(wdt, WDT_EN));
return 0;
}
@@ -52,7 +75,7 @@ static int qcom_wdt_stop(struct watchdog_device *wdd)
{
struct qcom_wdt *wdt = to_qcom_wdt(wdd);
- writel(0, wdt->base + WDT_EN);
+ writel(0, wdt_addr(wdt, WDT_EN));
return 0;
}
@@ -60,7 +83,7 @@ static int qcom_wdt_ping(struct watchdog_device *wdd)
{
struct qcom_wdt *wdt = to_qcom_wdt(wdd);
- writel(1, wdt->base + WDT_RST);
+ writel(1, wdt_addr(wdt, WDT_RST));
return 0;
}
@@ -83,10 +106,10 @@ static int qcom_wdt_restart(struct watchdog_device *wdd, unsigned long action,
*/
timeout = 128 * wdt->rate / 1000;
- writel(0, wdt->base + WDT_EN);
- writel(1, wdt->base + WDT_RST);
- writel(timeout, wdt->base + WDT_BITE_TIME);
- writel(1, wdt->base + WDT_EN);
+ writel(0, wdt_addr(wdt, WDT_EN));
+ writel(1, wdt_addr(wdt, WDT_RST));
+ writel(timeout, wdt_addr(wdt, WDT_BITE_TIME));
+ writel(1, wdt_addr(wdt, WDT_EN));
/*
* Actually make sure the above sequence hits hardware before sleeping.
@@ -119,9 +142,16 @@ static int qcom_wdt_probe(struct platform_device *pdev)
struct qcom_wdt *wdt;
struct resource *res;
struct device_node *np = pdev->dev.of_node;
+ const u32 *regs;
u32 percpu_offset;
int ret;
+ regs = of_device_get_match_data(&pdev->dev);
+ if (!regs) {
+ dev_err(&pdev->dev, "Unsupported QCOM WDT module\n");
+ return -ENODEV;
+ }
+
wdt = devm_kzalloc(&pdev->dev, sizeof(*wdt), GFP_KERNEL);
if (!wdt)
return -ENOMEM;
@@ -172,6 +202,7 @@ static int qcom_wdt_probe(struct platform_device *pdev)
wdt->wdd.min_timeout = 1;
wdt->wdd.max_timeout = 0x10000000U / wdt->rate;
wdt->wdd.parent = &pdev->dev;
+ wdt->layout = regs;
if (readl(wdt->base + WDT_STS) & 1)
wdt->wdd.bootstatus = WDIOF_CARDRESET;
@@ -208,8 +239,9 @@ static int qcom_wdt_remove(struct platform_device *pdev)
}
static const struct of_device_id qcom_wdt_of_table[] = {
- { .compatible = "qcom,kpss-timer" },
- { .compatible = "qcom,scss-timer" },
+ { .compatible = "qcom,kpss-timer", .data = reg_offset_data_apcs_tmr },
+ { .compatible = "qcom,scss-timer", .data = reg_offset_data_apcs_tmr },
+ { .compatible = "qcom,kpss-wdt", .data = reg_offset_data_kpss },
{ },
};
MODULE_DEVICE_TABLE(of, qcom_wdt_of_table);
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
next prev parent reply other threads:[~2016-06-29 17:50 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-06-29 17:50 [PATCH v3 1/3] watchdog: qcom: update device tree bindings Thomas Pedersen
2016-06-29 17:50 ` Thomas Pedersen [this message]
2016-06-30 13:44 ` [PATCH v3 2/3] watchdog: qcom: add option for standalone watchdog not in timer block Guenter Roeck
2016-07-17 20:21 ` Wim Van Sebroeck
2016-06-29 17:50 ` [PATCH v3 3/3] watchdog: qcom: configure BARK time in addition to BITE time Thomas Pedersen
2016-07-17 20:20 ` Wim Van Sebroeck
2016-06-30 13:42 ` [PATCH v3 1/3] watchdog: qcom: update device tree bindings Guenter Roeck
2016-07-17 20:20 ` Wim Van Sebroeck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1467222602-18362-2-git-send-email-twp@codeaurora.org \
--to=twp@codeaurora.org \
--cc=andy.gross@linaro.org \
--cc=david.brown@linaro.org \
--cc=linux-watchdog@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=linux@roeck-us.net \
--cc=mark.rutland@arm.com \
--cc=mmcclint@codeaurora.org \
--cc=robh+dt@kernel.org \
--cc=wim@iguana.be \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).