Linux Watchdog driver development
 help / color / mirror / Atom feed
From: Guenter Roeck <linux@roeck-us.net>
To: Wim Van Sebroeck <wim@iguana.be>
Cc: linux-watchdog@vger.kernel.org, linux-kernel@vger.kernel.org,
	Matt Fleming <matt.fleming@intel.com>,
	Guenter Roeck <linux@roeck-us.net>
Subject: [PATCH 2/4] watchdog: iTCO_wdt: Use device managed resources
Date: Tue,  3 Jan 2017 06:39:22 -0800	[thread overview]
Message-ID: <1483454364-28650-2-git-send-email-linux@roeck-us.net> (raw)
In-Reply-To: <1483454364-28650-1-git-send-email-linux@roeck-us.net>

Using device managed resources simplifies error handling and cleanup,
and to reduce the likelyhood of errors.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
---
 drivers/watchdog/iTCO_wdt.c | 80 ++++++++++-----------------------------------
 1 file changed, 17 insertions(+), 63 deletions(-)

diff --git a/drivers/watchdog/iTCO_wdt.c b/drivers/watchdog/iTCO_wdt.c
index a35a9164ccd0..eed1dee6de19 100644
--- a/drivers/watchdog/iTCO_wdt.c
+++ b/drivers/watchdog/iTCO_wdt.c
@@ -401,27 +401,6 @@ static const struct watchdog_ops iTCO_wdt_ops = {
  *	Init & exit routines
  */
 
-static void iTCO_wdt_cleanup(struct iTCO_wdt_private *p)
-{
-	/* Stop the timer before we leave */
-	if (!nowayout)
-		iTCO_wdt_stop(&p->wddev);
-
-	/* Deregister */
-	watchdog_unregister_device(&p->wddev);
-
-	/* release resources */
-	release_region(p->tco_res->start,
-			resource_size(p->tco_res));
-	release_region(p->smi_res->start,
-			resource_size(p->smi_res));
-	if (p->iTCO_version >= 2) {
-		iounmap(p->gcs_pmc);
-		release_mem_region(p->gcs_pmc_res->start,
-				resource_size(p->gcs_pmc_res));
-	}
-}
-
 static int iTCO_wdt_probe(struct platform_device *dev)
 {
 	struct itco_wdt_platform_data *pdata = dev_get_platdata(&dev->dev);
@@ -458,41 +437,28 @@ static int iTCO_wdt_probe(struct platform_device *dev)
 		p->gcs_pmc_res = platform_get_resource(dev,
 						       IORESOURCE_MEM,
 						       ICH_RES_MEM_GCS_PMC);
-
-		if (!p->gcs_pmc_res)
-			return -ENODEV;
-
-		if (!request_mem_region(p->gcs_pmc_res->start,
-					resource_size(p->gcs_pmc_res),
-					dev->name))
-			return -EBUSY;
-
-		p->gcs_pmc = ioremap(p->gcs_pmc_res->start,
-				     resource_size(p->gcs_pmc_res));
-		if (!p->gcs_pmc) {
-			ret = -EIO;
-			goto unreg_gcs_pmc;
-		}
+		p->gcs_pmc = devm_ioremap_resource(&dev->dev, p->gcs_pmc_res);
+		if (IS_ERR(p->gcs_pmc))
+			return PTR_ERR(p->gcs_pmc);
 	}
 
 	/* Check chipset's NO_REBOOT bit */
 	if (iTCO_wdt_unset_NO_REBOOT_bit(p) &&
 	    iTCO_vendor_check_noreboot_on()) {
 		pr_info("unable to reset NO_REBOOT flag, device disabled by hardware/BIOS\n");
-		ret = -ENODEV;	/* Cannot reset NO_REBOOT bit */
-		goto unmap_gcs_pmc;
+		return -ENODEV;	/* Cannot reset NO_REBOOT bit */
 	}
 
 	/* Set the NO_REBOOT bit to prevent later reboots, just for sure */
 	iTCO_wdt_set_NO_REBOOT_bit(p);
 
 	/* The TCO logic uses the TCO_EN bit in the SMI_EN register */
-	if (!request_region(p->smi_res->start,
-			    resource_size(p->smi_res), dev->name)) {
+	if (!devm_request_region(&dev->dev, p->smi_res->start,
+				 resource_size(p->smi_res),
+				 dev->name)) {
 		pr_err("I/O address 0x%04llx already in use, device disabled\n",
 		       (u64)SMI_EN(p));
-		ret = -EBUSY;
-		goto unmap_gcs_pmc;
+		return -EBUSY;
 	}
 	if (turn_SMI_watchdog_clear_off >= p->iTCO_version) {
 		/*
@@ -504,12 +470,12 @@ static int iTCO_wdt_probe(struct platform_device *dev)
 		outl(val32, SMI_EN(p));
 	}
 
-	if (!request_region(p->tco_res->start,
-			    resource_size(p->tco_res), dev->name)) {
+	if (!devm_request_region(&dev->dev, p->tco_res->start,
+				 resource_size(p->tco_res),
+				 dev->name)) {
 		pr_err("I/O address 0x%04llx already in use, device disabled\n",
 		       (u64)TCOBASE(p));
-		ret = -EBUSY;
-		goto unreg_smi;
+		return -EBUSY;
 	}
 
 	pr_info("Found a %s TCO device (Version=%d, TCOBASE=0x%04llx)\n",
@@ -555,37 +521,25 @@ static int iTCO_wdt_probe(struct platform_device *dev)
 			WATCHDOG_TIMEOUT);
 	}
 
-	ret = watchdog_register_device(&p->wddev);
+	ret = devm_watchdog_register_device(&dev->dev, &p->wddev);
 	if (ret != 0) {
 		pr_err("cannot register watchdog device (err=%d)\n", ret);
-		goto unreg_tco;
+		return ret;
 	}
 
 	pr_info("initialized. heartbeat=%d sec (nowayout=%d)\n",
 		heartbeat, nowayout);
 
 	return 0;
-
-unreg_tco:
-	release_region(p->tco_res->start, resource_size(p->tco_res));
-unreg_smi:
-	release_region(p->smi_res->start, resource_size(p->smi_res));
-unmap_gcs_pmc:
-	if (p->iTCO_version >= 2)
-		iounmap(p->gcs_pmc);
-unreg_gcs_pmc:
-	if (p->iTCO_version >= 2)
-		release_mem_region(p->gcs_pmc_res->start,
-				   resource_size(p->gcs_pmc_res));
-	return ret;
 }
 
 static int iTCO_wdt_remove(struct platform_device *dev)
 {
 	struct iTCO_wdt_private *p = platform_get_drvdata(dev);
 
-	if (p->tco_res || p->smi_res)
-		iTCO_wdt_cleanup(p);
+	/* Stop the timer before we leave */
+	if (!nowayout)
+		iTCO_wdt_stop(&p->wddev);
 
 	return 0;
 }
-- 
2.7.4


  reply	other threads:[~2017-01-03 14:39 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-01-03 14:39 [PATCH 1/4] watchdog: iTCO_wdt: Use allocated data structures Guenter Roeck
2017-01-03 14:39 ` Guenter Roeck [this message]
2017-01-03 22:41   ` [PATCH 2/4] watchdog: iTCO_wdt: Use device managed resources Andy Shevchenko
2017-01-03 23:38     ` Guenter Roeck
2017-01-04  2:44     ` Guenter Roeck
2017-01-03 14:39 ` [PATCH 3/4] watchdog: iTCO_wdt: Use pdev for platform device and pci_dev for pci device Guenter Roeck
2017-01-03 22:39   ` Andy Shevchenko
2017-01-03 23:40     ` Guenter Roeck
2017-01-03 23:48       ` Andy Shevchenko
2017-01-03 23:50         ` Andy Shevchenko
2017-01-04  1:38           ` Guenter Roeck
2017-01-03 14:39 ` [PATCH 4/4] watchdog: iTCO_wdt: Simplify module init function Guenter Roeck
2017-01-03 22:38   ` Andy Shevchenko
2017-01-03 22:44 ` [PATCH 1/4] watchdog: iTCO_wdt: Use allocated data structures Andy Shevchenko

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1483454364-28650-2-git-send-email-linux@roeck-us.net \
    --to=linux@roeck-us.net \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-watchdog@vger.kernel.org \
    --cc=matt.fleming@intel.com \
    --cc=wim@iguana.be \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox