[PATCH v7 1/3] dt: bindings: add documentation for zx2967 family watchdog controller

[PATCH v7 1/3] dt: bindings: add documentation for zx2967 family watchdog controller

[Baoyou Xie]

This patch adds dt-binding documentation for zx2967 family
watchdog controller.

Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
---
 .../bindings/watchdog/zte,zx2967-wdt.txt           | 32 ++++++++++++++++++++++
 1 file changed, 32 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/watchdog/zte,zx2967-wdt.txt

diff --git a/Documentation/devicetree/bindings/watchdog/zte,zx2967-wdt.txt b/Documentation/devicetree/bindings/watchdog/zte,zx2967-wdt.txt
new file mode 100644
index 0000000..06ce677
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/zte,zx2967-wdt.txt
@@ -0,0 +1,32 @@
+ZTE zx2967 Watchdog timer
+
+Required properties:
+
+- compatible : should be one of the following.
+       * zte,zx296718-wdt
+- reg : Specifies base physical address and size of the registers.
+- clocks : Pairs of phandle and specifier referencing the controller's clocks.
+- resets : Reference to the reset controller controlling the watchdog
+           controller.
+
+Optional properties:
+
+- timeout-sec : Contains the watchdog timeout in seconds.
+- zte,wdt-reset-sysctrl : Directs how to reset system by the watchdog.
+	if we don't want to restart system when watchdog been triggered,
+	it's not required, vice versa.
+	It should include following fields.
+	  * phandle of aon-sysctrl.
+	  * offset of register that be written, should be 0xb0.
+	  * configure value that be written to aon-sysctrl.
+	  * bit mask, corresponding bits will be affected.
+
+Example:
+
+wdt: watchdog@1465000 {
+	compatible = "zte,zx296718-wdt";
+	reg = <0x1465000 0x1000>;
+	clocks = <&topcrm WDT_WCLK>;
+	resets = <&toprst 35>;
+	zte,wdt-reset-sysctrl = <&aon_sysctrl 0xb0 1 0x115>;
+};
-- 
2.7.4

[PATCH v7 2/3] MAINTAINERS: add zx2967 watchdog controller driver to ARM ZTE architecture

[Baoyou Xie]

Add the zx2967 watchdog controller driver as maintained by ARM ZTE
architecture maintainers, as they're parts of the core IP.

Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org>
---
 MAINTAINERS | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/MAINTAINERS b/MAINTAINERS
index edfdea3..275c434 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1990,11 +1990,13 @@ F:	drivers/clk/zte/
 F:	drivers/reset/reset-zx2967.c
 F:	drivers/soc/zte/
 F:	drivers/thermal/zx*
+F:	drivers/watchdog/zx2967_wdt.c
 F:	Documentation/devicetree/bindings/arm/zte.txt
 F:	Documentation/devicetree/bindings/clock/zx296702-clk.txt
 F:	Documentation/devicetree/bindings/reset/zte,zx2967-reset.txt
 F:	Documentation/devicetree/bindings/soc/zte/
 F:	Documentation/devicetree/bindings/thermal/zx*
+F:	Documentation/devicetree/bindings/watchdog/zte,zx2967-wdt.txt
 F:	include/dt-bindings/soc/zx*.h
 
 ARM/ZYNQ ARCHITECTURE
-- 
2.7.4