From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from mail1.bemta5.messagelabs.com ([195.245.231.145]:39486 "EHLO mail1.bemta5.messagelabs.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S965032Ab3E2Iew (ORCPT ); Wed, 29 May 2013 04:34:52 -0400 Date: Wed, 29 May 2013 10:35:27 +0200 From: Johannes Thumshirn To: Wim Van Sebroeck CC: , Subject: Re: [PATCH v4 2/2] watchdog: Add sysfs interface for MEN A21 watchdog Message-ID: <20130529083527.GA12478@jtlinux> References: <20130527090756.GA14258@spo001.leaseweb.com> <1369678434-13515-1-git-send-email-johannes.thumshirn@men.de> <1369678434-13515-2-git-send-email-johannes.thumshirn@men.de> <20130527194154.GE14258@spo001.leaseweb.com> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Disposition: inline In-Reply-To: <20130527194154.GE14258@spo001.leaseweb.com> Sender: linux-watchdog-owner@vger.kernel.org List-Id: linux-watchdog@vger.kernel.org On Mon, May 27, 2013 at 09:41:54PM +0200, Wim Van Sebroeck wrote: > Hi Johannes, > > > This patch adds a sysfs interface for the watchdog device found on MEN A21 > > Boards. > > > > The newly generated files are: > > * rebootcause: > > Can be one of: > > Power on Reset, > > CPU Reset Request, > > Push Button, > > FPGA Reset Request, > > Watchdog, > > Local Power Bad, > > Invalid or > > BDI > > and shows the reason of the boards last reboot. > > Question: why don't you use the detection of the reboot cause in your driver > initialization so that you can: > 1) report the reboot cause at the start of the driver (like we do in most > drivers that support these kind of features) > 2) set the .bootstatus info in the watchdog_device struct data? > (See the WDIOF flags in #include > #define WDIOF_OVERHEAT 0x0001 /* Reset due to CPU overheat */ > #define WDIOF_FANFAULT 0x0002 /* Fan failed */ > #define WDIOF_EXTERN1 0x0004 /* External relay 1 */ > #define WDIOF_EXTERN2 0x0008 /* External relay 2 */ > #define WDIOF_POWERUNDER 0x0010 /* Power bad/power fault */ > #define WDIOF_CARDRESET 0x0020 /* Card previously reset the CPU */ > #define WDIOF_POWEROVER 0x0040 /* Power over voltage */ > #define WDIOF_SETTIMEOUT 0x0080 /* Set timeout (in seconds) */ > #define WDIOF_MAGICCLOSE 0x0100 /* Supports magic close char */ > #define WDIOF_PRETIMEOUT 0x0200 /* Pretimeout (in seconds), get/set */ > #define WDIOF_ALARMONLY 0x0400 /* Watchdog triggers a management or > other external alarm not a reboot */ > #define WDIOF_KEEPALIVEPING 0x8000 /* Keep alive ping reply */ > (Example driver: wdt_pci.c )). > > Kind regards, > Wim. > Ok I'll do. Should I repost this as a change of this patch or the "add driver" patch? Regards, Johannes