Re: [PATCH] watchdog: at91sam9: use endian agnostic IO

[Guenter Roeck <linux@roeck-us.net>]

On Thu, Mar 26, 2015 at 02:34:14PM +0000, Ben Dooks wrote:
> Use endian agnostic IO functions for the watchdog driver for when it
> is enabled on ATSAMA5D36 devices running in big endian.
> 
> Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>

Acked-by: Guenter Roeck <linux@roeck-us.net>

> ---
> CC: Boris Brezillon <boris.brezillon@free-electrons.com>
> CC: Guenter Roeck <linux@roeck-us.net>
> CC: Nicolas Ferre <nicolas.ferre@atmel.com>
> CC: Wim Van Sebroeck <wim@iguana.be>
> CC: linux-watchdog@vger.kernel.org
> CC: Andrew Victor <linux@maxim.org.za>
> CC: Nicolas Ferre <nicolas.ferre@atmel.com>
> CC: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
> ---
>  drivers/watchdog/at91sam9_wdt.c | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/watchdog/at91sam9_wdt.c b/drivers/watchdog/at91sam9_wdt.c
> index 1443b3c..e4698f7 100644
> --- a/drivers/watchdog/at91sam9_wdt.c
> +++ b/drivers/watchdog/at91sam9_wdt.c
> @@ -40,9 +40,9 @@
>  #define DRV_NAME "AT91SAM9 Watchdog"
>  
>  #define wdt_read(wdt, field) \
> -	__raw_readl((wdt)->base + (field))
> +	readl_relaxed((wdt)->base + (field))
>  #define wdt_write(wtd, field, val) \
> -	__raw_writel((val), (wdt)->base + (field))
> +	writel_relaxed((val), (wdt)->base + (field))
>  
>  /* AT91SAM9 watchdog runs a 12bit counter @ 256Hz,
>   * use this to convert a watchdog
> -- 
> 2.1.4
>