linux-watchdog.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Viresh Kumar <viresh.kumar@linaro.org>
To: Sandeep Tripathy <tripathy@broadcom.com>
Cc: wim@iguana.be, linux-watchdog@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	bcm-kernel-feedback-list@broadcom.com
Subject: Re: [PATCH 1/1] watchdog: sp805: ping fails to abort wdt reset
Date: Tue, 19 Jan 2016 12:23:13 +0530	[thread overview]
Message-ID: <20160119065313.GA22443@vireshk> (raw)
In-Reply-To: <1453183462-27577-1-git-send-email-tripathy@broadcom.com>

On 19-01-16, 11:34, Sandeep Tripathy wrote:
>  sp805 wdt asserts interrupt for the first expiry and

Why an extra space before sp805 ?

> reloads the counter. If wdt interrupt is set and count
> reaches zero then wdt reset event is generated.To get

Add space after full-stop.

> wdt reset at t timeout the driver loads wdt counter

Keep t and t/2 in single quotes, its hardly readable otherwise.

> with t/2. A ping before t second *should* prevent wdt
> reset. Currently if ping is done after t/2 sec then
> wdt interrupt condition gets set. On the next countdown
> of loadval wdt reset event occurs eventhough wdt was
> reloaded before the set timeout t.
> 
>  This patch clears the interrupt condition on ping.

Why extra spaces before 'This'? 

> 
> Signed-off-by: Sandeep Tripathy <tripathy@broadcom.com>
> ---
>  drivers/watchdog/sp805_wdt.c |    5 ++---
>  1 file changed, 2 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/watchdog/sp805_wdt.c b/drivers/watchdog/sp805_wdt.c
> index 01d8162..e7a715e 100644
> --- a/drivers/watchdog/sp805_wdt.c
> +++ b/drivers/watchdog/sp805_wdt.c
> @@ -139,12 +139,11 @@ static int wdt_config(struct watchdog_device *wdd, bool ping)
>  
>  	writel_relaxed(UNLOCK, wdt->base + WDTLOCK);
>  	writel_relaxed(wdt->load_val, wdt->base + WDTLOAD);
> +	writel_relaxed(INT_MASK, wdt->base + WDTINTCLR);
>  
> -	if (!ping) {
> -		writel_relaxed(INT_MASK, wdt->base + WDTINTCLR);
> +	if (!ping)
>  		writel_relaxed(INT_ENABLE | RESET_ENABLE, wdt->base +
>  				WDTCONTROL);
> -	}
>  
>  	writel_relaxed(LOCK, wdt->base + WDTLOCK);

If I read the TRM properly, then you don't need to load the WDTLOAD
register on ping and so your change can be written as:

diff --git a/drivers/watchdog/sp805_wdt.c b/drivers/watchdog/sp805_wdt.c
index 01d816251302..42e1ec86532d 100644
--- a/drivers/watchdog/sp805_wdt.c
+++ b/drivers/watchdog/sp805_wdt.c
@@ -138,10 +138,10 @@ static int wdt_config(struct watchdog_device *wdd, bool ping)
        spin_lock(&wdt->lock);
 
        writel_relaxed(UNLOCK, wdt->base + WDTLOCK);
-       writel_relaxed(wdt->load_val, wdt->base + WDTLOAD);
+       writel_relaxed(INT_MASK, wdt->base + WDTINTCLR);
 
        if (!ping) {
-               writel_relaxed(INT_MASK, wdt->base + WDTINTCLR);
+               writel_relaxed(wdt->load_val, wdt->base + WDTLOAD);
                writel_relaxed(INT_ENABLE | RESET_ENABLE, wdt->base +
                                WDTCONTROL);
        }


Please try if this works or not.

-- 
viresh

  reply	other threads:[~2016-01-19  6:53 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-01-19  6:04 [PATCH 1/1] watchdog: sp805: ping fails to abort wdt reset Sandeep Tripathy
2016-01-19  6:53 ` Viresh Kumar [this message]
2016-01-19  7:11   ` Guenter Roeck
2016-01-19  7:17     ` Viresh Kumar

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20160119065313.GA22443@vireshk \
    --to=viresh.kumar@linaro.org \
    --cc=bcm-kernel-feedback-list@broadcom.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-watchdog@vger.kernel.org \
    --cc=tripathy@broadcom.com \
    --cc=wim@iguana.be \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).