[PATCH v2] watchdog: w83627hf: Added NCT6102D support.

[Rob Kramer <rob@solution-space.com>]

As used in (and tested on) the ASRock IMB-150 board. Implementation is
identical to other NCT chips, just with different registers.

Signed-off-by: Rob Kramer <rob@solution-space.com>
---
 drivers/watchdog/Kconfig        |  1 +
 drivers/watchdog/w83627hf_wdt.c | 22 +++++++++++++++++++---
 2 files changed, 20 insertions(+), 3 deletions(-)

diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 4f0e7be..318d8bc 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -1140,6 +1140,7 @@ config W83627HF_WDT
 		NCT6779
 		NCT6791
 		NCT6792
+		NCT6102D/04D/06D
 
 	  This watchdog simply watches your kernel to make sure it doesn't
 	  freeze, and if it does, it reboots your computer after a certain
diff --git a/drivers/watchdog/w83627hf_wdt.c b/drivers/watchdog/w83627hf_wdt.c
index cab14bc..09e8003 100644
--- a/drivers/watchdog/w83627hf_wdt.c
+++ b/drivers/watchdog/w83627hf_wdt.c
@@ -45,10 +45,11 @@
 static int wdt_io;
 static int cr_wdt_timeout;	/* WDT timeout register */
 static int cr_wdt_control;	/* WDT control register */
+static int cr_wdt_csr;		/* WDT control & status register */
 
 enum chips { w83627hf, w83627s, w83697hf, w83697ug, w83637hf, w83627thf,
 	     w83687thf, w83627ehf, w83627dhg, w83627uhg, w83667hg, w83627dhg_p,
-	     w83667hg_b, nct6775, nct6776, nct6779, nct6791, nct6792 };
+	     w83667hg_b, nct6775, nct6776, nct6779, nct6791, nct6792, nct6102 };
 
 static int timeout;			/* in seconds */
 module_param(timeout, int, 0);
@@ -92,15 +93,21 @@ MODULE_PARM_DESC(early_disable, "Disable watchdog at boot time (default=0)");
 #define W83667HG_B_ID		0xb3
 #define NCT6775_ID		0xb4
 #define NCT6776_ID		0xc3
+#define NCT6102_ID		0xc4
 #define NCT6779_ID		0xc5
 #define NCT6791_ID		0xc8
 #define NCT6792_ID		0xc9
 
 #define W83627HF_WDT_TIMEOUT	0xf6
 #define W83697HF_WDT_TIMEOUT	0xf4
+#define NCT6102D_WDT_TIMEOUT	0xf1
 
 #define W83627HF_WDT_CONTROL	0xf5
 #define W83697HF_WDT_CONTROL	0xf3
+#define NCT6102D_WDT_CONTROL	0xf0
+
+#define W836X7HF_WDT_CSR	0xf7
+#define NCT6102D_WDT_CSR	0xf2
 
 static void superio_outb(int reg, int val)
 {
@@ -197,6 +204,7 @@ static int w83627hf_init(struct watchdog_device *wdog, enum chips chip)
 	case nct6779:
 	case nct6791:
 	case nct6792:
+	case nct6102:
 		/*
 		 * These chips have a fixed WDTO# output pin (W83627UHG),
 		 * or support more than one WDTO# output pin.
@@ -229,8 +237,8 @@ static int w83627hf_init(struct watchdog_device *wdog, enum chips chip)
 	superio_outb(cr_wdt_control, t);
 
 	/* reset trigger, disable keyboard & mouse turning off watchdog */
-	t = superio_inb(0xF7) & ~0xD0;
-	superio_outb(0xF7, t);
+	t = superio_inb(cr_wdt_csr) & ~0xD0;
+	superio_outb(cr_wdt_csr, t);
 
 	superio_exit();
 
@@ -322,6 +330,7 @@ static int wdt_find(int addr)
 
 	cr_wdt_timeout = W83627HF_WDT_TIMEOUT;
 	cr_wdt_control = W83627HF_WDT_CONTROL;
+	cr_wdt_csr = W836X7HF_WDT_CSR;
 
 	ret = superio_enter();
 	if (ret)
@@ -387,6 +396,12 @@ static int wdt_find(int addr)
 	case NCT6792_ID:
 		ret = nct6792;
 		break;
+	case NCT6102_ID:
+		ret = nct6102;
+		cr_wdt_timeout = NCT6102D_WDT_TIMEOUT;
+		cr_wdt_control = NCT6102D_WDT_CONTROL;
+		cr_wdt_csr = NCT6102D_WDT_CSR;
+		break;
 	case 0xff:
 		ret = -ENODEV;
 		break;
@@ -422,6 +437,7 @@ static int __init wdt_init(void)
 		"NCT6779",
 		"NCT6791",
 		"NCT6792",
+		"NCT6102",
 	};
 
 	wdt_io = 0x2e;
-- 
2.6.2