Re: [PATCH v2 0/4] watchdog: add driver for Renesas Gen3 WDT watchdogs

[Guenter Roeck <linux@roeck-us.net>]

On Mon, Apr 04, 2016 at 07:02:45PM +0200, Geert Uytterhoeven wrote:
> Hi Günter,
> 
> On Mon, Apr 4, 2016 at 5:25 PM, Guenter Roeck <linux@roeck-us.net> wrote:
> > On Mon, Apr 04, 2016 at 05:21:44PM +0200, Geert Uytterhoeven wrote:
> >> On Mon, Apr 4, 2016 at 4:59 PM, Wolfram Sang <wsa@the-dreams.de> wrote:
> >> >> My Salvator-X reboots after timeout from "cat > /dev/watchdog0", but
> >> >> it doesn't reboot through "reboot" or "reboot -f"?
> >> >
> >> > That sadly doesn't work on Gen3. From the RFC v5 cover letter:
> >>
> >> > ===
> >> >
> >> > * drop restart_handler since ARM64 uses PSCI firmware resets which do
> >> >   not call restart handlers
> >> >
> >> > The last point was quite a bummer to me because plain reboot was the
> >> > reason I wrote this driver ;) Well, so is life...
> >>
> >> That's indeed silly. Can't we have it as a low-priority restart handler, to
> >
> > Yes, it is. It defeats the purpose of restart handlers. PSCI reset should have
> > been implemented as a high priority restart handler.
> 
> Unfortunately that won't work: psci_sys_reset() doesn't return on failure.
> 
You mean it just hangs ? That is bad. If that is the case, it is not reliable
and thus should be a low priority (or at best medium priority) restart handler
(which can be replaced with a working higher priority one).

> We can still clear arm_pm_restart in platform code, though ;-)
> 
I had originally planned to replace arm_pm_restart() completely with restart
handlers. Maybe I should revive the effort ?

Guenter