[PATCH 1/2] drivers/watchdog: Document new aspeed optional dev tree properties.

[Christopher Bostic <cbostic@linux.vnet.ibm.com>]

Describe new optional property 'external-signal'.  When present in the
system device tree an exernal signal is generated on watchdog timeout.

Describe new optional property 'no-system-reset'.  When present in the
system device tree no system reset is to occur on watchdog timeout.
System reset in this case is managed by one of the other watchogs
available.

Signed-off-by: Christopher Bostic <cbostic@linux.vnet.ibm.com>
---
 Documentation/devicetree/bindings/watchdog/aspeed-wdt.txt | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/Documentation/devicetree/bindings/watchdog/aspeed-wdt.txt b/Documentation/devicetree/bindings/watchdog/aspeed-wdt.txt
index c5e74d7..4099ea5 100644
--- a/Documentation/devicetree/bindings/watchdog/aspeed-wdt.txt
+++ b/Documentation/devicetree/bindings/watchdog/aspeed-wdt.txt
@@ -8,9 +8,20 @@ Required properties:
  - reg: physical base address of the controller and length of memory mapped
    region
 
+Optional properties:
+ - external-signal: If the property is present then an external signal is to
+   be generated on watchdog timeout.  If absent, external signal is not
+   generated.
+
+ - no-system-reset: If the property is present then system will not be reset
+   on watchdog timeout. In this case one of the other watchdogs will handle
+   reset.  If absent then the watchdog resets the system on timeout.
+
 Example:
 
 	wdt1: watchdog@1e785000 {
 		compatible = "aspeed,ast2400-wdt";
 		reg = <0x1e785000 0x1c>;
+		external-signal;
+		no-system-reset;
 	};
-- 
1.8.2.2