From: Wim Van Sebroeck <wim@iguana.be>
To: Linus Torvalds <torvalds@linux-foundation.org>
Cc: "Andrew Morton" <akpm@linux-foundation.org>,
LKML <linux-kernel@vger.kernel.org>,
"Linux Watchdog Mailing List" <linux-watchdog@vger.kernel.org>,
"Andreas Färber" <afaerber@suse.de>,
"André Draszik" <git@andred.net>,
"Andrew Jeffery" <andrew@aj.id.au>,
"Arnd Bergmann" <arnd@arndb.de>,
"Benjamin Gaignard" <benjamin.gaignard@linaro.org>,
"Chris Packham" <chris.packham@alliedtelesis.co.nz>,
"Christophe Leroy" <christophe.leroy@c-s.fr>,
"Corentin Labbe" <clabbe@baylibre.com>,
"Corentin Labbe" <clabbe.montjoie@gmail.com>,
"David Lechner" <david@lechnology.com>,
"Eric Long" <eric.long@spreadtrum.com>,
"Geert Uytterhoeven" <geert+renesas@glider.be>,
"Greg Kroah-Hartman" <gregkh@linuxfoundation.org>,
"Guenter Roeck" <linux@roeck-us.net>,
"Gustavo A. R. Silva" <garsilva@embeddedor.com>,
"Jerry Hoemann" <jerry.hoemann@hpe.com>,
"Linus Walleij" <linus.walleij@linaro.org>,
"Martin Kaiser" <martin@kaiser.cx>,
"Mathieu Malaterre" <malat@debian.org>,
"Matt Redfearn" <matt.redfearn@mips.com>,
"Michael Grzeschik" <mgr@pengutronix.de>,
"Michael Grzeschik" <m.grzeschik@pengutronix.de>,
"Oleksij Rempel" <o.rempel@pengutronix.de>,
"Radu Rendec" <rrendec@arista.com>,
"Rasmus Villemoes" <rasmus.villemoes@prevas.dk>,
"Tomas Winkler" <tomas.winkler@intel.com>,
"Wim Van Sebroeck" <wim@iguana.be>,
"Wim Van Sebroeck" <wim@linux-watchdog.org>
Subject: [GIT PULL REQUEST] watchdog - v4.16 merge window
Date: Mon, 5 Feb 2018 11:20:56 +0100 [thread overview]
Message-ID: <20180205102056.GA470@infomag.iguana.be> (raw)
Hi Linus,
The following changes since commit f3b5ad89de16f5d42e8ad36fbdf85f705c1ae051:
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma (2017-12-16 13:43:08 -0800)
are available in the git repository at:
git://www.linux-watchdog.org/linux-watchdog.git
for you to fetch changes up to 592a547adf686dbec7687e816ecdf9101fe227f5:
documentation: watchdog: remove documentation of w83697hf_wdt/w83697ug_wdt (2018-02-03 11:09:54 +0100)
----------------------------------------------------------------
Andreas Färber (2):
dt-bindings: watchdog: Add Realtek RTD1295
watchdog: Add Realtek RTD1295
Andrew Jeffery (4):
watchdog: aspeed: Retain watchdog enabled state
watchdog: aspeed: Fix 'Apseed' typo in Kconfig
watchdog: aspeed: Remove specific reference to AST2400 in Kconfig
watchdog: aspeed: Move init to arch_initcall
André Draszik (2):
watchdog: mt7621: set WDOG_HW_RUNNING bit when appropriate
watchdog: mt7621: switch to using managed devm_watchdog_register_device()
Arnd Bergmann (2):
watchdog: xen: use time64_t for timeouts
watchdog: hpwdt: fix unused variable warning
Benjamin Gaignard (1):
watchdog: stm32: Fix copyright
Chris Packham (1):
watchdog: orion: fix typo
Christophe Leroy (3):
watchdog: mpc8xxx: use the core worker function
watchdog: core: make sure the watchdog worker always works
watchdog: core: make sure the watchdog_worker is not deferred
Corentin Labbe (6):
watchdog: sunxi_wdt: use of_device_get_match_data
watchdog: document watchdog_init_timeout() wdd parameter
watchdog: remove at32ap700x_wdt
documentation: watchdog: remove documentation of at32ap700x_wdt
documentation: watchdog: remove documentation for ixp2000
documentation: watchdog: remove documentation of w83697hf_wdt/w83697ug_wdt
David Lechner (1):
watchdog: davinci_wdt: add restart function
Eric Long (2):
dt-bindings: watchdog: Add Spreadtrum watchdog documentation
watchdog: Add Spreadtrum watchdog driver
Geert Uytterhoeven (1):
dt-bindings: watchdog: renesas-wdt: Add support for the r8a77970 wdt
Greg Kroah-Hartman (1):
watchdog: pcwd_usb: remove unneeded DRIVER_LICENSE #define
Guenter Roeck (15):
watchdog: Fix potential kref imbalance when opening watchdog
watchdog: Fix kref imbalance seen if handle_boot_enabled=0
MAINTAINERS: Add Guenter Roeck as co-maintainer of watchdog subsystem
watchdog: sp5100_tco: Always use SP5100_IO_PM_{INDEX_REG,DATA_REG}
watchdog: sp5100_tco: Fix watchdog disable bit
watchdog: sp5100_tco: Use request_muxed_region where possible
watchdog: sp5100_tco: Use standard error codes
watchdog: sp5100_tco: Clean up sp5100_tco_setupdevice
watchdog: sp5100_tco: Match PCI device early
watchdog: sp5100_tco: Use dev_ print functions where possible
watchdog: sp5100_tco: Clean up function and variable names
watchdog: sp5100_tco: Convert to use watchdog subsystem
watchdog: sp5100_tco: Use bit operations
watchdog: sp5100-tco: Abort if watchdog is disabled by hardware
watchdog: sp5100_tco: Add support for recent FCH versions
Gustavo A. R. Silva (9):
watchdog: advantechwdt: mark expected switch fall-through
watchdog: alim1535_wdt: mark expected switch fall-through
watchdog: f71808e_wdt: mark expected switch fall-throughs
watchdog: pcwd_usb: mark expected switch fall-through
watchdog: pcwd_pci: mark expected switch fall-through
watchdog: watchdog_dev: mark expected switch fall-through
watchdog: wdt_pci: mark expected switch fall-through
watchdog: eurotechwdt: mark expected switch fall-through
watchdog: ib700wdt: mark expected switch fall-through
Jerry Hoemann (2):
watchdog: hpwdt: SMBIOS check
watchdog: hpwdt: Check source of NMI
Linus Walleij (5):
watchdog: gpio: Add some local helper variables
watchdog: gpio: Convert to use GPIO descriptors
watchdog: gemini/ftwdt010: rename DT bindings
watchdog: gemini/ftwdt010: rename driver and symbols
watchdog: ftwdt010: Make interrupt optional
Martin Kaiser (1):
watchdog: imx2_wdt: restore previous timeout after suspend+resume
Mathieu Malaterre (2):
watchdog: jz4740: Add support for the watchdog in jz4780 SoC
dt: watchdog: Document compatibility with JZ4780
Matt Redfearn (1):
watchdog: indydog: Add dependency on SGI_HAS_INDYDOG
Michael Grzeschik (3):
watchdog: da9062: Add restart handler support
watchdog: da9062: Disable and wait before changing timeout
watchdog: da9062: use protection delay mechanism from core
Oleksij Rempel (1):
watchdog: dw_wdt: add stop watchdog operation
Radu Rendec (6):
watchdog: i6300esb: use the watchdog subsystem
watchdog: i6300esb: support multiple devices
watchdog: i6300esb: do not hardcode heartbeat limits
watchdog: i6300esb: remove info message and version number
watchdog: xen_wdt: use the watchdog subsystem
watchdog: xen_wdt: remove info message and version number
Rasmus Villemoes (1):
watchdog: gpio_wdt: set WDOG_HW_RUNNING in gpio_wdt_stop
Tomas Winkler (1):
watchdog: mei_wdt: don't use of variable length array
Wim Van Sebroeck (1):
Change my E-mail address.
.../bindings/watchdog/cortina,gemini-watchdog.txt | 17 -
...ina,gemin-watchdog.txt => faraday,ftwdt010.txt} | 11 +-
.../bindings/watchdog/ingenic,jz4740-wdt.txt | 4 +-
.../bindings/watchdog/realtek,rtd119x.txt | 17 +
.../devicetree/bindings/watchdog/renesas-wdt.txt | 3 +-
.../devicetree/bindings/watchdog/sprd-wdt.txt | 19 +
Documentation/watchdog/watchdog-parameters.txt | 23 -
MAINTAINERS | 4 +-
drivers/watchdog/Kconfig | 41 +-
drivers/watchdog/Makefile | 7 +-
drivers/watchdog/advantechwdt.c | 2 +-
drivers/watchdog/alim1535_wdt.c | 2 +-
drivers/watchdog/aspeed_wdt.c | 21 +-
drivers/watchdog/at32ap700x_wdt.c | 433 -------------
drivers/watchdog/da9062_wdt.c | 48 +-
drivers/watchdog/davinci_wdt.c | 38 ++
drivers/watchdog/dw_wdt.c | 18 +-
drivers/watchdog/eurotechwdt.c | 2 +-
drivers/watchdog/f71808e_wdt.c | 4 +-
drivers/watchdog/ftwdt010_wdt.c | 236 +++++++
drivers/watchdog/gemini_wdt.c | 229 -------
drivers/watchdog/gpio_wdt.c | 58 +-
drivers/watchdog/hpwdt.c | 12 +-
drivers/watchdog/i6300esb.c | 377 ++++-------
drivers/watchdog/ib700wdt.c | 2 +-
drivers/watchdog/imx2_wdt.c | 20 +-
drivers/watchdog/jz4740_wdt.c | 1 +
drivers/watchdog/mei_wdt.c | 7 +-
drivers/watchdog/mpc8xxx_wdt.c | 83 ++-
drivers/watchdog/mt7621_wdt.c | 34 +-
drivers/watchdog/orion_wdt.c | 2 +-
drivers/watchdog/pcwd_pci.c | 2 +-
drivers/watchdog/pcwd_usb.c | 5 +-
drivers/watchdog/rtd119x_wdt.c | 168 +++++
drivers/watchdog/sp5100_tco.c | 710 +++++++++------------
drivers/watchdog/sp5100_tco.h | 57 +-
drivers/watchdog/sprd_wdt.c | 399 ++++++++++++
drivers/watchdog/stm32_iwdg.c | 6 +-
drivers/watchdog/sunxi_wdt.c | 7 +-
drivers/watchdog/watchdog_core.c | 1 +
drivers/watchdog/watchdog_dev.c | 125 ++--
drivers/watchdog/wdt_pci.c | 2 +-
drivers/watchdog/xen_wdt.c | 255 ++------
43 files changed, 1711 insertions(+), 1801 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/watchdog/cortina,gemini-watchdog.txt
rename Documentation/devicetree/bindings/watchdog/{cortina,gemin-watchdog.txt => faraday,ftwdt010.txt} (55%)
create mode 100644 Documentation/devicetree/bindings/watchdog/realtek,rtd119x.txt
create mode 100644 Documentation/devicetree/bindings/watchdog/sprd-wdt.txt
delete mode 100644 drivers/watchdog/at32ap700x_wdt.c
create mode 100644 drivers/watchdog/ftwdt010_wdt.c
delete mode 100644 drivers/watchdog/gemini_wdt.c
create mode 100644 drivers/watchdog/rtd119x_wdt.c
create mode 100644 drivers/watchdog/sprd_wdt.c
next reply other threads:[~2018-02-05 10:31 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-02-05 10:20 Wim Van Sebroeck [this message]
2018-02-05 17:50 ` [GIT PULL REQUEST] watchdog - v4.16 merge window Linus Torvalds
2018-02-05 18:42 ` Guenter Roeck
2018-02-07 2:19 ` Guenter Roeck
-- strict thread matches above, loose matches on Subject: below --
2018-02-07 10:42 Wim Van Sebroeck
2018-02-07 20:02 ` Linus Torvalds
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180205102056.GA470@infomag.iguana.be \
--to=wim@iguana.be \
--cc=afaerber@suse.de \
--cc=akpm@linux-foundation.org \
--cc=andrew@aj.id.au \
--cc=arnd@arndb.de \
--cc=benjamin.gaignard@linaro.org \
--cc=chris.packham@alliedtelesis.co.nz \
--cc=christophe.leroy@c-s.fr \
--cc=clabbe.montjoie@gmail.com \
--cc=clabbe@baylibre.com \
--cc=david@lechnology.com \
--cc=eric.long@spreadtrum.com \
--cc=garsilva@embeddedor.com \
--cc=geert+renesas@glider.be \
--cc=git@andred.net \
--cc=gregkh@linuxfoundation.org \
--cc=jerry.hoemann@hpe.com \
--cc=linus.walleij@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-watchdog@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=m.grzeschik@pengutronix.de \
--cc=malat@debian.org \
--cc=martin@kaiser.cx \
--cc=matt.redfearn@mips.com \
--cc=mgr@pengutronix.de \
--cc=o.rempel@pengutronix.de \
--cc=rasmus.villemoes@prevas.dk \
--cc=rrendec@arista.com \
--cc=tomas.winkler@intel.com \
--cc=torvalds@linux-foundation.org \
--cc=wim@linux-watchdog.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).