From: Terry Bowman <terry.bowman@amd.com>
To: <terry.bowman@amd.com>, <linux@roeck-us.net>,
<linux-watchdog@vger.kernel.org>, <jdelvare@suse.com>,
<linux-i2c@vger.kernel.org>, <wsa@kernel.org>,
<andy.shevchenko@gmail.com>, <rafael.j.wysocki@intel.com>
Cc: <linux-kernel@vger.kernel.org>, <wim@linux-watchdog.org>,
<rrichter@amd.com>, <thomas.lendacky@amd.com>,
<sudheesh.mavila@amd.com>, <Nehal-bakulchandra.Shah@amd.com>,
<Basavaraj.Natikar@amd.com>, <Shyam-sundar.S-k@amd.com>,
<Mario.Limonciello@amd.com>
Subject: [PATCH v4 4/9] i2c: piix4: Move SMBus controller base address detect into function
Date: Sun, 30 Jan 2022 12:41:25 -0600 [thread overview]
Message-ID: <20220130184130.176646-5-terry.bowman@amd.com> (raw)
In-Reply-To: <20220130184130.176646-1-terry.bowman@amd.com>
Move SMBus controller base address detection into function. Refactor
is in preparation for following MMIO changes.
Signed-off-by: Terry Bowman <terry.bowman@amd.com>
---
drivers/i2c/busses/i2c-piix4.c | 71 +++++++++++++++++++++-------------
1 file changed, 45 insertions(+), 26 deletions(-)
diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c
index 5a98970ac60a..eab06e9e5fdf 100644
--- a/drivers/i2c/busses/i2c-piix4.c
+++ b/drivers/i2c/busses/i2c-piix4.c
@@ -282,12 +282,52 @@ static int piix4_setup(struct pci_dev *PIIX4_dev,
return piix4_smba;
}
+static int piix4_setup_sb800_smba(struct pci_dev *PIIX4_dev,
+ u8 smb_en,
+ u8 aux,
+ u8 *smb_en_status,
+ unsigned short *piix4_smba)
+{
+ u8 smba_en_lo;
+ u8 smba_en_hi;
+ int retval;
+
+ retval = piix4_sb800_region_request(&PIIX4_dev->dev);
+ if (retval)
+ return retval;
+
+ outb_p(smb_en, SB800_PIIX4_SMB_IDX);
+ smba_en_lo = inb_p(SB800_PIIX4_SMB_IDX + 1);
+ outb_p(smb_en + 1, SB800_PIIX4_SMB_IDX);
+ smba_en_hi = inb_p(SB800_PIIX4_SMB_IDX + 1);
+
+ piix4_sb800_region_release(&PIIX4_dev->dev);
+
+ if (!smb_en) {
+ *smb_en_status = smba_en_lo & 0x10;
+ *piix4_smba = smba_en_hi << 8;
+ if (aux)
+ *piix4_smba |= 0x20;
+ } else {
+ *smb_en_status = smba_en_lo & 0x01;
+ *piix4_smba = ((smba_en_hi << 8) | smba_en_lo) & 0xffe0;
+ }
+
+ if (!*smb_en_status) {
+ dev_err(&PIIX4_dev->dev,
+ "SMBus Host Controller not enabled!\n");
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
static int piix4_setup_sb800(struct pci_dev *PIIX4_dev,
const struct pci_device_id *id, u8 aux)
{
- unsigned short piix4_smba;
- u8 smba_en_lo, smba_en_hi, smb_en, smb_en_status, port_sel;
+ u8 smb_en, smb_en_status, port_sel;
u8 i2ccfg, i2ccfg_offset = 0x10;
+ unsigned short piix4_smba;
int retval;
/* SB800 and later SMBus does not support forcing address */
@@ -310,33 +350,12 @@ static int piix4_setup_sb800(struct pci_dev *PIIX4_dev,
else
smb_en = (aux) ? 0x28 : 0x2c;
- retval = piix4_sb800_region_request(&PIIX4_dev->dev);
+ retval = piix4_setup_sb800_smba(PIIX4_dev, smb_en, aux, &smb_en_status,
+ &piix4_smba);
+
if (retval)
return retval;
- outb_p(smb_en, SB800_PIIX4_SMB_IDX);
- smba_en_lo = inb_p(SB800_PIIX4_SMB_IDX + 1);
- outb_p(smb_en + 1, SB800_PIIX4_SMB_IDX);
- smba_en_hi = inb_p(SB800_PIIX4_SMB_IDX + 1);
-
- piix4_sb800_region_release(&PIIX4_dev->dev);
-
- if (!smb_en) {
- smb_en_status = smba_en_lo & 0x10;
- piix4_smba = smba_en_hi << 8;
- if (aux)
- piix4_smba |= 0x20;
- } else {
- smb_en_status = smba_en_lo & 0x01;
- piix4_smba = ((smba_en_hi << 8) | smba_en_lo) & 0xffe0;
- }
-
- if (!smb_en_status) {
- dev_err(&PIIX4_dev->dev,
- "SMBus Host Controller not enabled!\n");
- return -ENODEV;
- }
-
if (acpi_check_region(piix4_smba, SMBIOSIZE, piix4_driver.name))
return -ENODEV;
--
2.30.2
next prev parent reply other threads:[~2022-01-30 18:43 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-01-30 18:41 [PATCH v4 0/9] i2c: piix4: Replace cd6h/cd7h port I/O accesses with MMIO accesses Terry Bowman
2022-01-30 18:41 ` [PATCH v4 1/9] kernel/resource: Introduce request_mem_region_muxed() Terry Bowman
2022-01-30 18:41 ` [PATCH v4 2/9] i2c: piix4: Replace hardcoded memory map size with a #define Terry Bowman
2022-01-30 18:41 ` [PATCH v4 3/9] i2c: piix4: Move port I/O region request/release code into functions Terry Bowman
2022-02-08 14:45 ` Jean Delvare
2022-02-08 15:15 ` Terry Bowman
2022-01-30 18:41 ` Terry Bowman [this message]
2022-02-08 15:09 ` [PATCH v4 4/9] i2c: piix4: Move SMBus controller base address detect into function Jean Delvare
2022-01-30 18:41 ` [PATCH v4 5/9] i2c: piix4: Move SMBus port selection " Terry Bowman
2022-02-08 15:29 ` Jean Delvare
2022-01-30 18:41 ` [PATCH v4 6/9] i2c: piix4: Add EFCH MMIO support to region request and release Terry Bowman
2022-02-08 15:49 ` Jean Delvare
2022-01-30 18:41 ` [PATCH v4 7/9] i2c: piix4: Add EFCH MMIO support to SMBus base address detect Terry Bowman
2022-01-30 18:41 ` [PATCH v4 8/9] i2c: piix4: Add EFCH MMIO support for SMBus port select Terry Bowman
2022-02-08 16:19 ` Jean Delvare
2022-01-30 18:41 ` [PATCH v4 9/9] i2c: piix4: Enable EFCH MMIO for Family 17h+ Terry Bowman
2022-02-08 16:33 ` Jean Delvare
2022-02-08 20:10 ` Andy Shevchenko
2022-02-08 21:00 ` Terry Bowman
2022-01-31 11:01 ` [PATCH v4 0/9] i2c: piix4: Replace cd6h/cd7h port I/O accesses with MMIO accesses Andy Shevchenko
2022-02-01 15:21 ` Terry Bowman
2022-02-07 12:08 ` Wolfram Sang
2022-02-08 17:11 ` Jean Delvare
2022-02-08 19:36 ` Terry Bowman
2022-02-08 21:46 ` Jean Delvare
2022-02-08 23:03 ` Terry Bowman
2022-02-09 7:04 ` Jean Delvare
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220130184130.176646-5-terry.bowman@amd.com \
--to=terry.bowman@amd.com \
--cc=Basavaraj.Natikar@amd.com \
--cc=Mario.Limonciello@amd.com \
--cc=Nehal-bakulchandra.Shah@amd.com \
--cc=Shyam-sundar.S-k@amd.com \
--cc=andy.shevchenko@gmail.com \
--cc=jdelvare@suse.com \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-watchdog@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=rafael.j.wysocki@intel.com \
--cc=rrichter@amd.com \
--cc=sudheesh.mavila@amd.com \
--cc=thomas.lendacky@amd.com \
--cc=wim@linux-watchdog.org \
--cc=wsa@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox