[v2][PATCH] watchdog: core: stop watchdog when executing poweroff command

[Meng Li <Meng.Li@windriver.com>]

From: Meng Li <meng.li@windriver.com>

On some platforms, for example, Intel SoC FPGA platform, the watchdog
is started in u-boot, and so kernel will create a timer and work to
keep watchdog alive. But when user executes commands "poweroff" or
"shutdown -h", the system is reset when watchdog triggers timeout even
if WDOG_STOP_ON_REBOOT is set in watchdog driver. The root cause is
that the watchdog is not stopped properly because the SYS_POWER_OFF case
is not supported in notify callback function. So, add this case to stop
watchdog when executing poweroff command.

Signed-off-by: Meng Li <Meng.Li@windriver.com>
---

v2:
 - fix typos in commit log

---
 drivers/watchdog/watchdog_core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/watchdog/watchdog_core.c b/drivers/watchdog/watchdog_core.c
index d4c5a736fdcb..5b55ccae06d4 100644
--- a/drivers/watchdog/watchdog_core.c
+++ b/drivers/watchdog/watchdog_core.c
@@ -161,7 +161,7 @@ static int watchdog_reboot_notifier(struct notifier_block *nb,
 	struct watchdog_device *wdd;
 
 	wdd = container_of(nb, struct watchdog_device, reboot_nb);
-	if (code == SYS_DOWN || code == SYS_HALT) {
+	if (code == SYS_DOWN || code == SYS_HALT || code == SYS_POWER_OFF) {
 		if (watchdog_hw_running(wdd)) {
 			int ret;
 
-- 
2.17.1