Linux Watchdog driver development
 help / color / mirror / Atom feed
From: Rosen Penev <rosenp@gmail.com>
To: linux-watchdog@vger.kernel.org
Cc: Wim Van Sebroeck <wim@linux-watchdog.org>,
	Guenter Roeck <linux@roeck-us.net>,
	linux-kernel@vger.kernel.org (open list)
Subject: [PATCH] watchdog: orion_wdt: Use devm APIs for clock and watchdog management
Date: Tue, 19 May 2026 14:42:29 -0700	[thread overview]
Message-ID: <20260519214229.16656-1-rosenp@gmail.com> (raw)

Replace clk_get/clk_prepare_enable/clk_put with devm_clk_get_enabled
and devm_clk_get_optional_enabled so the clock lifecycle is managed
automatically. Switch to devm_watchdog_register_device to eliminate
the manual remove callback and the disable_clk error path.

Switching to devm in these functions is fine as the proper
platform_device is passed in.

Assisted-by: Claude:Sonnet-4.6
Signed-off-by: Rosen Penev <rosenp@gmail.com>
---
 drivers/watchdog/orion_wdt.c | 64 +++++++-----------------------------
 1 file changed, 12 insertions(+), 52 deletions(-)

diff --git a/drivers/watchdog/orion_wdt.c b/drivers/watchdog/orion_wdt.c
index a92701ff2653..85e9877de952 100644
--- a/drivers/watchdog/orion_wdt.c
+++ b/drivers/watchdog/orion_wdt.c
@@ -80,14 +80,9 @@ static int orion_wdt_clock_init(struct platform_device *pdev,
 {
 	int ret;
 
-	dev->clk = clk_get(&pdev->dev, NULL);
+	dev->clk = devm_clk_get_enabled(&pdev->dev, NULL);
 	if (IS_ERR(dev->clk))
 		return PTR_ERR(dev->clk);
-	ret = clk_prepare_enable(dev->clk);
-	if (ret) {
-		clk_put(dev->clk);
-		return ret;
-	}
 
 	dev->clk_rate = clk_get_rate(dev->clk);
 	return 0;
@@ -98,14 +93,9 @@ static int armada370_wdt_clock_init(struct platform_device *pdev,
 {
 	int ret;
 
-	dev->clk = clk_get(&pdev->dev, NULL);
+	dev->clk = devm_clk_get_enabled(&pdev->dev, NULL);
 	if (IS_ERR(dev->clk))
 		return PTR_ERR(dev->clk);
-	ret = clk_prepare_enable(dev->clk);
-	if (ret) {
-		clk_put(dev->clk);
-		return ret;
-	}
 
 	/* Setup watchdog input clock */
 	atomic_io_modify(dev->reg + TIMER_CTRL,
@@ -121,14 +111,11 @@ static int armada375_wdt_clock_init(struct platform_device *pdev,
 {
 	int ret;
 
-	dev->clk = of_clk_get_by_name(pdev->dev.of_node, "fixed");
-	if (!IS_ERR(dev->clk)) {
-		ret = clk_prepare_enable(dev->clk);
-		if (ret) {
-			clk_put(dev->clk);
-			return ret;
-		}
+	dev->clk = devm_clk_get_optional_enabled(&pdev->dev, "fixed");
+	if (IS_ERR(dev->clk))
+		return PTR_ERR(dev->clk);
 
+	if (dev->clk) {
 		atomic_io_modify(dev->reg + TIMER_CTRL,
 				WDT_AXP_FIXED_ENABLE_BIT,
 				WDT_AXP_FIXED_ENABLE_BIT);
@@ -138,16 +125,10 @@ static int armada375_wdt_clock_init(struct platform_device *pdev,
 	}
 
 	/* Mandatory fallback for proper devicetree backward compatibility */
-	dev->clk = clk_get(&pdev->dev, NULL);
+	dev->clk = devm_clk_get_enabled(&pdev->dev, NULL);
 	if (IS_ERR(dev->clk))
 		return PTR_ERR(dev->clk);
 
-	ret = clk_prepare_enable(dev->clk);
-	if (ret) {
-		clk_put(dev->clk);
-		return ret;
-	}
-
 	atomic_io_modify(dev->reg + TIMER_CTRL,
 			WDT_A370_RATIO_MASK(WDT_A370_RATIO_SHIFT),
 			WDT_A370_RATIO_MASK(WDT_A370_RATIO_SHIFT));
@@ -162,14 +143,9 @@ static int armadaxp_wdt_clock_init(struct platform_device *pdev,
 	int ret;
 	u32 val;
 
-	dev->clk = of_clk_get_by_name(pdev->dev.of_node, "fixed");
+	dev->clk = devm_clk_get_enabled(&pdev->dev, "fixed");
 	if (IS_ERR(dev->clk))
 		return PTR_ERR(dev->clk);
-	ret = clk_prepare_enable(dev->clk);
-	if (ret) {
-		clk_put(dev->clk);
-		return ret;
-	}
 
 	/* Fix the wdt and timer1 clock frequency to 25MHz */
 	val = WDT_AXP_FIXED_ENABLE_BIT | TIMER1_FIXED_ENABLE_BIT;
@@ -612,7 +588,7 @@ static int orion_wdt_probe(struct platform_device *pdev)
 				       pdev->name, dev);
 		if (ret < 0) {
 			dev_err(&pdev->dev, "failed to request IRQ\n");
-			goto disable_clk;
+			return ret;
 		}
 	}
 
@@ -624,34 +600,19 @@ static int orion_wdt_probe(struct platform_device *pdev)
 				       0, pdev->name, dev);
 		if (ret < 0) {
 			dev_err(&pdev->dev, "failed to request IRQ\n");
-			goto disable_clk;
+			return ret;
 		}
 	}
 
 
 	watchdog_set_nowayout(&dev->wdt, nowayout);
-	ret = watchdog_register_device(&dev->wdt);
+	ret = devm_watchdog_register_device(&pdev->dev, &dev->wdt);
 	if (ret)
-		goto disable_clk;
+		return ret;
 
 	pr_info("Initial timeout %d sec%s\n",
 		dev->wdt.timeout, nowayout ? ", nowayout" : "");
 	return 0;
-
-disable_clk:
-	clk_disable_unprepare(dev->clk);
-	clk_put(dev->clk);
-	return ret;
-}
-
-static void orion_wdt_remove(struct platform_device *pdev)
-{
-	struct watchdog_device *wdt_dev = platform_get_drvdata(pdev);
-	struct orion_watchdog *dev = watchdog_get_drvdata(wdt_dev);
-
-	watchdog_unregister_device(wdt_dev);
-	clk_disable_unprepare(dev->clk);
-	clk_put(dev->clk);
 }
 
 static void orion_wdt_shutdown(struct platform_device *pdev)
@@ -662,7 +623,6 @@ static void orion_wdt_shutdown(struct platform_device *pdev)
 
 static struct platform_driver orion_wdt_driver = {
 	.probe		= orion_wdt_probe,
-	.remove		= orion_wdt_remove,
 	.shutdown	= orion_wdt_shutdown,
 	.driver		= {
 		.name	= "orion_wdt",
-- 
2.54.0


             reply	other threads:[~2026-05-19 21:42 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-05-19 21:42 Rosen Penev [this message]
2026-05-19 22:08 ` [PATCH] watchdog: orion_wdt: Use devm APIs for clock and watchdog management sashiko-bot
2026-05-19 22:33 ` Guenter Roeck
2026-05-19 22:44   ` Rosen Penev
2026-05-19 23:10     ` Guenter Roeck
2026-05-19 23:19       ` Rosen Penev
2026-05-20  0:39         ` Guenter Roeck
2026-05-20  5:10 ` kernel test robot

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260519214229.16656-1-rosenp@gmail.com \
    --to=rosenp@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-watchdog@vger.kernel.org \
    --cc=linux@roeck-us.net \
    --cc=wim@linux-watchdog.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox