From: Guenter Roeck <linux@roeck-us.net>
To: dinguyen@altera.com, dinh.linux@gmail.com
Cc: Jamie Iles <jamie@jamieiles.com>,
Viresh Kumar <viresh.linux@gmail.com>,
Wim Van Sebroeck <wim@iguana.be>, Pavel Machek <pavel@denx.de>,
Rob Herring <rob.herring@calxeda.com>,
Pawel Moll <pawel.moll@arm.com>,
Mark Rutland <mark.rutland@arm.com>,
Stephen Warren <swarren@wwwdotorg.org>,
Ian Campbell <ijc+devicetree@hellion.org.uk>,
devicetree@vger.kernel.org, linux-watchdog@vger.kernel.org
Subject: Re: [PATCHv4] watchdog: dw: Enable OF support for DW watchdog timer
Date: Tue, 22 Oct 2013 06:30:17 -0700 [thread overview]
Message-ID: <52667DE9.2000605@roeck-us.net> (raw)
In-Reply-To: <1382441671-18444-1-git-send-email-dinguyen@altera.com>
On 10/22/2013 04:34 AM, dinguyen@altera.com wrote:
> From: Dinh Nguyen <dinguyen@altera.com>
>
> Add device tree support to the DW watchdog timer.
>
> Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
> Acked-by: Jamie Iles <jamie@jamieiles.com>
> Reviewed-by: Pavel Machek <pavel@denx.de>
> Cc: Guenter Roeck <linux@roeck-us.net>
> Cc: Jamie Iles <jamie@jamieiles.com>
> Cc: Viresh Kumar <viresh.linux@gmail.com>
> Cc: Wim Van Sebroeck <wim@iguana.be>
> Cc: Pavel Machek <pavel@denx.de>
> Cc: Rob Herring <rob.herring@calxeda.com>
> Cc: Pawel Moll <pawel.moll@arm.com>
> Cc: Mark Rutland <mark.rutland@arm.com>
> Cc: Stephen Warren <swarren@wwwdotorg.org>
> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
> Cc: devicetree@vger.kernel.org
> Cc: linux-watchdog@vger.kernel.org
> ---
> v4:
> - Add interrupts as an optional property, use "should contain".
> v3:
> - Clean up documentation
> v2:
> - Use of_match_ptr() for of_match_table
> ---
> .../devicetree/bindings/watchdog/dw_wdt.txt | 19 +++++++++++++++++++
> drivers/watchdog/dw_wdt.c | 8 ++++++++
> 2 files changed, 27 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/watchdog/dw_wdt.txt
>
> diff --git a/Documentation/devicetree/bindings/watchdog/dw_wdt.txt b/Documentation/devicetree/bindings/watchdog/dw_wdt.txt
> new file mode 100644
> index 0000000..8f5948a
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/watchdog/dw_wdt.txt
> @@ -0,0 +1,19 @@
> +Synopsys Designware Watchdog Timer
> +
> +Required Properties:
> +
> +- compatible : Should contain "snps,dw-wdt"
> +- reg : Base address and size of the watchdog timer register.
> +
Still missing 'clocks' here.
Thanks,
Guenter
> +Optional Properties:
> +
> +- interrupts : The interrupt used for the watchdog timeout warning.
> +
> +Example:
> +
> + watchdog0: wd@ffd02000 {
> + compatible = "snps,dw-wdt";
> + reg = <0xffd02000 0x1000>;
> + interrupts = <0 171 4>;
> + clocks = <&per_base_clk>;
> + };
> diff --git a/drivers/watchdog/dw_wdt.c b/drivers/watchdog/dw_wdt.c
> index e621098..261fa42 100644
> --- a/drivers/watchdog/dw_wdt.c
> +++ b/drivers/watchdog/dw_wdt.c
> @@ -29,6 +29,7 @@
> #include <linux/miscdevice.h>
> #include <linux/module.h>
> #include <linux/moduleparam.h>
> +#include <linux/of.h>
> #include <linux/pm.h>
> #include <linux/platform_device.h>
> #include <linux/spinlock.h>
> @@ -340,12 +341,19 @@ static int dw_wdt_drv_remove(struct platform_device *pdev)
> return 0;
> }
>
> +static const struct of_device_id dw_wdt_of_match[] = {
> + { .compatible = "snps,dw-wdt", },
> + { /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(of, dw_wdt_of_match);
> +
> static struct platform_driver dw_wdt_driver = {
> .probe = dw_wdt_drv_probe,
> .remove = dw_wdt_drv_remove,
> .driver = {
> .name = "dw_wdt",
> .owner = THIS_MODULE,
> + .of_match_table = of_match_ptr(dw_wdt_of_match),
> #ifdef CONFIG_PM
> .pm = &dw_wdt_pm_ops,
> #endif /* CONFIG_PM */
>
prev parent reply other threads:[~2013-10-22 13:30 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-10-22 11:34 [PATCHv4] watchdog: dw: Enable OF support for DW watchdog timer dinguyen
2013-10-22 13:30 ` Guenter Roeck [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=52667DE9.2000605@roeck-us.net \
--to=linux@roeck-us.net \
--cc=devicetree@vger.kernel.org \
--cc=dinguyen@altera.com \
--cc=dinh.linux@gmail.com \
--cc=ijc+devicetree@hellion.org.uk \
--cc=jamie@jamieiles.com \
--cc=linux-watchdog@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=pavel@denx.de \
--cc=pawel.moll@arm.com \
--cc=rob.herring@calxeda.com \
--cc=swarren@wwwdotorg.org \
--cc=viresh.linux@gmail.com \
--cc=wim@iguana.be \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).