public inbox for linux-watchdog@vger.kernel.org
 help / color / mirror / Atom feed
From: Guenter Roeck <linux@roeck-us.net>
To: "Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>,
	"Wim Van Sebroeck" <wim@iguana.be>
Cc: kernel@pengutronix.de, linux-watchdog@vger.kernel.org
Subject: Re: [PATCH v1 2/5] watchdog: mpc8xxx: simplify registration
Date: Fri, 07 Aug 2015 07:55:06 -0700	[thread overview]
Message-ID: <55C4C6CA.2060209@roeck-us.net> (raw)
In-Reply-To: <1438942067-1654-3-git-send-email-u.kleine-koenig@pengutronix.de>

On 08/07/2015 03:07 AM, Uwe Kleine-König wrote:
> Since commit ef90174f8210 ("watchdog: watchdog_core: Add watchdog
> registration deferral mechanism") there is no need to delay the call to
> watchdog_register_device any more. So simplify the registration code
> accordingly.
>
> Resetting wd_base to NULL can the also be dropped because nothing
> depends on it being NULL to signal probe failure any more. (The matching
> wd_base = NULL in .remove was missing, too.)
>
> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>

Reviewed-by: Guenter Roeck <linux@roeck-us.net>

> ---
>   drivers/watchdog/mpc8xxx_wdt.c | 38 +++++++-------------------------------
>   1 file changed, 7 insertions(+), 31 deletions(-)
>
> diff --git a/drivers/watchdog/mpc8xxx_wdt.c b/drivers/watchdog/mpc8xxx_wdt.c
> index 8ad42b83f995..e0acda3282d9 100644
> --- a/drivers/watchdog/mpc8xxx_wdt.c
> +++ b/drivers/watchdog/mpc8xxx_wdt.c
> @@ -51,7 +51,6 @@ struct mpc8xxx_wdt_type {
>   };
>
>   static struct mpc8xxx_wdt __iomem *wd_base;
> -static int mpc8xxx_wdt_init_late(void);
>
>   static u16 timeout = 0xffff;
>   module_param(timeout, ushort, 0);
> @@ -174,11 +173,14 @@ static int mpc8xxx_wdt_probe(struct platform_device *ofdev)
>   	timeout_sec = (timeout * wdt_type->prescaler) / freq;
>
>   	mpc8xxx_wdt_dev.timeout = timeout_sec;
> -#ifdef MODULE
> -	ret = mpc8xxx_wdt_init_late();
> -	if (ret)
> +
> +	watchdog_set_nowayout(&mpc8xxx_wdt_dev, nowayout);
> +
> +	ret = watchdog_register_device(&mpc8xxx_wdt_dev);
> +	if (ret) {
> +		pr_err("cannot register watchdog device (err=%d)\n", ret);
>   		goto err_unmap;
> -#endif
> +	}
>
>   	pr_info("WDT driver for MPC8xxx initialized. mode:%s timeout=%d (%d seconds)\n",
>   		reset ? "reset" : "interrupt", timeout, timeout_sec);
> @@ -193,7 +195,6 @@ static int mpc8xxx_wdt_probe(struct platform_device *ofdev)
>   	return 0;
>   err_unmap:
>   	iounmap(wd_base);
> -	wd_base = NULL;
>   	return ret;
>   }
>
> @@ -242,31 +243,6 @@ static struct platform_driver mpc8xxx_wdt_driver = {
>   	},
>   };
>
> -/*
> - * We do wdt initialization in two steps: arch_initcall probes the wdt
> - * very early to start pinging the watchdog (misc devices are not yet
> - * available), and later module_init() just registers the misc device.
> - */
> -static int mpc8xxx_wdt_init_late(void)
> -{
> -	int ret;
> -
> -	if (!wd_base)
> -		return -ENODEV;
> -
> -	watchdog_set_nowayout(&mpc8xxx_wdt_dev, nowayout);
> -
> -	ret = watchdog_register_device(&mpc8xxx_wdt_dev);
> -	if (ret) {
> -		pr_err("cannot register watchdog device (err=%d)\n", ret);
> -		return ret;
> -	}
> -	return 0;
> -}
> -#ifndef MODULE
> -module_init(mpc8xxx_wdt_init_late);
> -#endif
> -
>   static int __init mpc8xxx_wdt_init(void)
>   {
>   	return platform_driver_register(&mpc8xxx_wdt_driver);
>


  reply	other threads:[~2015-08-07 14:55 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-08-07 10:07 [PATCH v1 0/5] watchdog: mpc8xxx: several cleanups Uwe Kleine-König
2015-08-07 10:07 ` [PATCH v1 1/5] watchdog: mpc8xxx: remove dead code Uwe Kleine-König
2015-08-07 14:52   ` Guenter Roeck
2015-08-07 10:07 ` [PATCH v1 2/5] watchdog: mpc8xxx: simplify registration Uwe Kleine-König
2015-08-07 14:55   ` Guenter Roeck [this message]
2015-08-07 10:07 ` [PATCH v1 3/5] watchdog: mpc8xxx: make use of of_device_get_match_data Uwe Kleine-König
2015-08-07 14:56   ` Guenter Roeck
2015-08-10  7:24     ` Uwe Kleine-König
2015-08-10 17:33       ` Guenter Roeck
2015-08-10  7:25   ` Uwe Kleine-König
2015-08-10 17:33     ` Guenter Roeck
2015-08-07 10:07 ` [PATCH v1 4/5] watchdog: mpc8xxx: use dynamic memory for device specific data Uwe Kleine-König
2015-08-07 14:59   ` Guenter Roeck
2015-08-07 10:07 ` [PATCH v1 5/5] watchdog: mpc8xxx: allow to compile for MPC512x Uwe Kleine-König
2015-08-07 15:00   ` Guenter Roeck

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=55C4C6CA.2060209@roeck-us.net \
    --to=linux@roeck-us.net \
    --cc=kernel@pengutronix.de \
    --cc=linux-watchdog@vger.kernel.org \
    --cc=u.kleine-koenig@pengutronix.de \
    --cc=wim@iguana.be \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox