From: Guenter Roeck <linux@roeck-us.net>
To: Knud Poulsen <knpo@ieee.org>
Cc: Wim Van Sebroeck <wim@iguana.be>,
Linux Watchdog <linux-watchdog@vger.kernel.org>
Subject: Re: [PATCH] watchdog: f71808e_wdt: Add F81865 support
Date: Thu, 21 Apr 2016 06:48:32 -0700 [thread overview]
Message-ID: <5718DA30.3080003@roeck-us.net> (raw)
In-Reply-To: <5717C2D7.8030902@ieee.org>
On 04/20/2016 10:56 AM, Knud Poulsen wrote:
> Adds watchdog support for Fintek F81865 Super-IO chip to
> Fintek wdt driver (f71808e_wdt)
>
> Tested and verified on Lanner LEC-3030 Industrial PC
>
> Datasheet references:
> http://www.hardwaresecrets.com/datasheets/F81865_V028P.pdf
> http://www.alldatasheet.com/datasheet-pdf/pdf/406317/FINTEK/F81865.html
>
> Signed-off-by: Knud Poulsen <knpo@ieee.org>
> ---
> drivers/watchdog/f71808e_wdt.c | 36 ++++++++++++++++++++++++++++++------
> 1 file changed, 30 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/watchdog/f71808e_wdt.c b/drivers/watchdog/f71808e_wdt.c
> index 016bd93..956f8eb 100644
> --- a/drivers/watchdog/f71808e_wdt.c
> +++ b/drivers/watchdog/f71808e_wdt.c
> @@ -2,6 +2,7 @@
> * Copyright (C) 2006 by Hans Edgington <hans@edgington.nl> *
> * Copyright (C) 2007-2009 Hans de Goede <hdegoede@redhat.com> *
> * Copyright (C) 2010 Giel van Schijndel <me@mortis.eu> *
> + * Copyright (C) 2016 Knud Poulsen <knpo@ieee.org> *
For minor improvements like this really a stretch. Please reconsider.
> * *
> * This program is free software; you can redistribute it and/or modify *
> * it under the terms of the GNU General Public License as published by *
> @@ -38,7 +39,7 @@
>
> #define SIO_F71808FG_LD_WDT 0x07 /* Watchdog timer logical device */
> #define SIO_UNLOCK_KEY 0x87 /* Key to enable Super-I/O */
> -#define SIO_LOCK_KEY 0xAA /* Key to diasble Super-I/O */
> +#define SIO_LOCK_KEY 0xAA /* Key to disable Super-I/O */
Unrelated change - separate patch, please.
>
> #define SIO_REG_LDSEL 0x07 /* Logical device select */
> #define SIO_REG_DEVID 0x20 /* Device ID (2 bytes) */
> @@ -59,6 +60,7 @@
> #define SIO_F71869A_ID 0x1007 /* Chipset ID */
> #define SIO_F71882_ID 0x0541 /* Chipset ID */
> #define SIO_F71889_ID 0x0723 /* Chipset ID */
> +#define SIO_F81865_ID 0x0704 /* Chipset ID */
>
> #define F71808FG_REG_WDO_CONF 0xf0
> #define F71808FG_REG_WDT_CONF 0xf5
> @@ -71,6 +73,10 @@
> #define F71808FG_FLAG_WD_PULSE 4
> #define F71808FG_FLAG_WD_UNIT 3
>
> +#define F81865_REG_WDO_CONF 0xfa
> +#define F81865_FLAG_WDOUT_EN 0
> +#define F81865_FLAG_WDTMOUT_STS 6
> +
> /* Default values */
> #define WATCHDOG_TIMEOUT 60 /* 1 minute default timeout */
> #define WATCHDOG_MAX_TIMEOUT (60 * 255)
> @@ -112,7 +118,7 @@ module_param(start_withtimeout, uint, 0);
> MODULE_PARM_DESC(start_withtimeout, "Start watchdog timer on module load with"
> " given initial timeout. Zero (default) disables this feature.");
>
> -enum chips { f71808fg, f71858fg, f71862fg, f71869, f71882fg, f71889fg };
> +enum chips { f71808fg, f71858fg, f71862fg, f71869, f71882fg, f71889fg, f81865 };
>
> static const char *f71808e_names[] = {
> "f71808fg",
> @@ -121,6 +127,7 @@ static const char *f71808e_names[] = {
> "f71869",
> "f71882fg",
> "f71889fg",
> + "f81865",
> };
>
> /* Super-I/O Function prototypes */
> @@ -360,6 +367,11 @@ static int watchdog_start(void)
> superio_inb(watchdog.sioaddr, SIO_REG_MFUNCT3) & 0xcf);
> break;
>
> + case f81865:
> + /* Set pin 70 to WDTRST# */
> + superio_clear_bit(watchdog.sioaddr, SIO_REG_MFUNCT3, 5);
> + break;
> +
> default:
> /*
> * 'default' label to shut up the compiler and catch
> @@ -371,9 +383,13 @@ static int watchdog_start(void)
>
> superio_select(watchdog.sioaddr, SIO_F71808FG_LD_WDT);
> superio_set_bit(watchdog.sioaddr, SIO_REG_ENABLE, 0);
> - superio_set_bit(watchdog.sioaddr, F71808FG_REG_WDO_CONF,
> - F71808FG_FLAG_WDOUT_EN);
> -
> + if (watchdog.type == f81865) {
> + superio_set_bit(watchdog.sioaddr, F81865_REG_WDO_CONF,
> + F81865_FLAG_WDOUT_EN);
> + } else {
> + superio_set_bit(watchdog.sioaddr, F71808FG_REG_WDO_CONF,
> + F71808FG_FLAG_WDOUT_EN);
> + }
Unnecessary { }.
> superio_set_bit(watchdog.sioaddr, F71808FG_REG_WDT_CONF,
> F71808FG_FLAG_WD_EN);
>
> @@ -655,7 +671,12 @@ static int __init watchdog_init(int sioaddr)
> superio_select(watchdog.sioaddr, SIO_F71808FG_LD_WDT);
>
> wdt_conf = superio_inb(sioaddr, F71808FG_REG_WDT_CONF);
> - watchdog.caused_reboot = wdt_conf & F71808FG_FLAG_WDTMOUT_STS;
> + if (watchdog.type == f81865) {
> + watchdog.caused_reboot = wdt_conf & F81865_FLAG_WDTMOUT_STS;
> + } else {
> + watchdog.caused_reboot = wdt_conf & F71808FG_FLAG_WDTMOUT_STS;
> + }
> +
Unnecessary { }, and please no double empty lines.
>
> superio_exit(sioaddr);
>
> @@ -770,6 +791,9 @@ static int __init f71808e_find(int sioaddr)
> /* Confirmed (by datasheet) not to have a watchdog. */
> err = -ENODEV;
> goto exit;
> + case SIO_F81865_ID:
> + watchdog.type = f81865;
> + break;
> default:
> pr_info("Unrecognized Fintek device: %04x\n",
> (unsigned int)devid);
>
next prev parent reply other threads:[~2016-04-21 13:48 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-04-20 17:56 [PATCH] watchdog: f71808e_wdt: Add F81865 support Knud Poulsen
2016-04-21 13:48 ` Guenter Roeck [this message]
2016-04-21 19:18 ` Knud Poulsen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5718DA30.3080003@roeck-us.net \
--to=linux@roeck-us.net \
--cc=knpo@ieee.org \
--cc=linux-watchdog@vger.kernel.org \
--cc=wim@iguana.be \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).