From: Kevin Hilman <khilman@deeprootsystems.com>
To: wim@iguana.be
Cc: tony@atomide.com, linux-watchdog@vger.kernel.org, paul@pwsan.com,
b-cousson@ti.com, rnayak@ti.com, p-basak2@ti.com,
linux-omap@vger.kernel.org, "Varadarajan\,
Charulatha" <charu@ti.com>
Subject: Re: [PATCH v5 6/6] OMAP: WDT: Use PM runtime APIs instead of clk FW APIs
Date: Wed, 15 Sep 2010 07:45:42 -0700 [thread overview]
Message-ID: <87fwxbgj55.fsf@deeprootsystems.com> (raw)
In-Reply-To: <1284528403-6494-7-git-send-email-charu@ti.com> (Charulatha Varadarajan's message of "Wed, 15 Sep 2010 10:56:43 +0530")
Hi Wim,
"Varadarajan, Charulatha" <charu@ti.com> writes:
> Call runtime pm APIs pm_runtime_put_sync() and pm_runtime_get_sync()
> for enabling/disabling the clocks, sysconfig settings instead of using
> clock FW APIs.
>
> Signed-off-by: Charulatha V <charu@ti.com>
With your ack, I'll be glad to merge this via the OMAP tree since it
depends on the rest of the series for the OMAP platform specific
changes.
Kevin
> ---
> drivers/watchdog/omap_wdt.c | 42 +++++++-----------------------------------
> 1 files changed, 7 insertions(+), 35 deletions(-)
>
> diff --git a/drivers/watchdog/omap_wdt.c b/drivers/watchdog/omap_wdt.c
> index 76b58ab..dbbc580 100644
> --- a/drivers/watchdog/omap_wdt.c
> +++ b/drivers/watchdog/omap_wdt.c
> @@ -38,11 +38,11 @@
> #include <linux/err.h>
> #include <linux/platform_device.h>
> #include <linux/moduleparam.h>
> -#include <linux/clk.h>
> #include <linux/bitops.h>
> #include <linux/io.h>
> #include <linux/uaccess.h>
> #include <linux/slab.h>
> +#include <linux/pm_runtime.h>
> #include <mach/hardware.h>
> #include <plat/prcm.h>
>
> @@ -61,8 +61,6 @@ struct omap_wdt_dev {
> void __iomem *base; /* physical */
> struct device *dev;
> int omap_wdt_users;
> - struct clk *ick;
> - struct clk *fck;
> struct resource *mem;
> struct miscdevice omap_wdt_miscdev;
> };
> @@ -146,8 +144,7 @@ static int omap_wdt_open(struct inode *inode, struct file *file)
> if (test_and_set_bit(1, (unsigned long *)&(wdev->omap_wdt_users)))
> return -EBUSY;
>
> - clk_enable(wdev->ick); /* Enable the interface clock */
> - clk_enable(wdev->fck); /* Enable the functional clock */
> + pm_runtime_get_sync(wdev->dev);
>
> /* initialize prescaler */
> while (__raw_readl(base + OMAP_WATCHDOG_WPS) & 0x01)
> @@ -177,8 +174,7 @@ static int omap_wdt_release(struct inode *inode, struct file *file)
>
> omap_wdt_disable(wdev);
>
> - clk_disable(wdev->ick);
> - clk_disable(wdev->fck);
> + pm_runtime_put_sync(wdev->dev);
> #else
> printk(KERN_CRIT "omap_wdt: Unexpected close, not stopping!\n");
> #endif
> @@ -292,19 +288,7 @@ static int __devinit omap_wdt_probe(struct platform_device *pdev)
>
> wdev->omap_wdt_users = 0;
> wdev->mem = mem;
> -
> - wdev->ick = clk_get(&pdev->dev, "ick");
> - if (IS_ERR(wdev->ick)) {
> - ret = PTR_ERR(wdev->ick);
> - wdev->ick = NULL;
> - goto err_clk;
> - }
> - wdev->fck = clk_get(&pdev->dev, "fck");
> - if (IS_ERR(wdev->fck)) {
> - ret = PTR_ERR(wdev->fck);
> - wdev->fck = NULL;
> - goto err_clk;
> - }
> + wdev->dev = &pdev->dev;
>
> wdev->base = ioremap(res->start, resource_size(res));
> if (!wdev->base) {
> @@ -314,8 +298,8 @@ static int __devinit omap_wdt_probe(struct platform_device *pdev)
>
> platform_set_drvdata(pdev, wdev);
>
> - clk_enable(wdev->ick);
> - clk_enable(wdev->fck);
> + pm_runtime_enable(wdev->dev);
> + pm_runtime_get_sync(wdev->dev);
>
> omap_wdt_disable(wdev);
> omap_wdt_adjust_timeout(timer_margin);
> @@ -333,11 +317,7 @@ static int __devinit omap_wdt_probe(struct platform_device *pdev)
> __raw_readl(wdev->base + OMAP_WATCHDOG_REV) & 0xFF,
> timer_margin);
>
> - /* autogate OCP interface clock */
> - __raw_writel(0x01, wdev->base + OMAP_WATCHDOG_SYS_CONFIG);
> -
> - clk_disable(wdev->ick);
> - clk_disable(wdev->fck);
> + pm_runtime_put_sync(wdev->dev);
>
> omap_wdt_dev = pdev;
>
> @@ -349,12 +329,6 @@ err_misc:
>
> err_ioremap:
> wdev->base = NULL;
> -
> -err_clk:
> - if (wdev->ick)
> - clk_put(wdev->ick);
> - if (wdev->fck)
> - clk_put(wdev->fck);
> kfree(wdev);
>
> err_kzalloc:
> @@ -386,8 +360,6 @@ static int __devexit omap_wdt_remove(struct platform_device *pdev)
> release_mem_region(res->start, resource_size(res));
> platform_set_drvdata(pdev, NULL);
>
> - clk_put(wdev->ick);
> - clk_put(wdev->fck);
> iounmap(wdev->base);
>
> kfree(wdev);
next prev parent reply other threads:[~2010-09-15 14:45 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-09-15 5:26 [PATCH v5 0/6] OMAP: WDT: Implement WDT in hwmod way Varadarajan, Charulatha
2010-09-15 5:26 ` [PATCH v5 1/6] OMAP3: hwmod data: Add watchdog timer Varadarajan, Charulatha
2010-09-15 5:26 ` [PATCH v5 2/6] OMAP2420: " Varadarajan, Charulatha
2010-09-15 5:26 ` [PATCH v5 3/6] OMAP2430: " Varadarajan, Charulatha
2010-09-15 5:26 ` [PATCH v5 4/6] OMAP4: " Varadarajan, Charulatha
2010-09-15 5:26 ` [PATCH v5 5/6] OMAP2PLUS: WDT: use omap_device_build for device registration Varadarajan, Charulatha
2010-09-15 17:52 ` Tony Lindgren
2010-09-15 5:26 ` [PATCH v5 6/6] OMAP: WDT: Use PM runtime APIs instead of clk FW APIs Varadarajan, Charulatha
2010-09-15 14:45 ` Kevin Hilman [this message]
2010-09-15 17:55 ` Tony Lindgren
2010-09-15 19:31 ` Kevin Hilman
2010-09-15 18:40 ` Wim Van Sebroeck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87fwxbgj55.fsf@deeprootsystems.com \
--to=khilman@deeprootsystems.com \
--cc=b-cousson@ti.com \
--cc=charu@ti.com \
--cc=linux-omap@vger.kernel.org \
--cc=linux-watchdog@vger.kernel.org \
--cc=p-basak2@ti.com \
--cc=paul@pwsan.com \
--cc=rnayak@ti.com \
--cc=tony@atomide.com \
--cc=wim@iguana.be \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox