* Meson gxbb watchdog driver.
@ 2016-06-23 17:22 Anand Moon
0 siblings, 0 replies; only message in thread
From: Anand Moon @ 2016-06-23 17:22 UTC (permalink / raw)
To: Neil Armstrong; +Cc: linux-watchdog
Hi Neil,
I have seen you post on watchdog driver for Meson gxbb_wdt.
I would like to know if this driver can work with watchdog demon.
When I configure this device /dev/watchdog with watchdog demon
It tries to send continuous ping to reset the timer.
On debugging further gxbb_wdt driver reset the control register to zero
So when I try to kill the watchdog demon it triggers following.
[ 85.616779] .....ping continuously to say alive
[ 85.616902] .....ping continuously to say alive
[ 85.616908] .....ping continuously to say alive
[ 85.967005] watchdog watchdog0: watchdog did not stop!
[ 85.967036] .....ping continuously to say alive
[ 86.018820] .....ping continuously to say alive
[ 86.018836] .....ping continuously to say alive
[ 86.028546] .....ping continuously to say alive
[ 87.028586] .....ping continuously to say alive
This dose not trigger watchdog reset and reboot.
Could you help me out how this should work out.
Second question should watchdog demon register to all the cpu cores.
Best Regards
-Anand Moon
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2016-06-23 17:23 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2016-06-23 17:22 Meson gxbb watchdog driver Anand Moon
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).