From: Guenter Roeck <linux@roeck-us.net>
To: H Hartley Sweeten <hsweeten@visionengravers.com>,
linux-watchdog@vger.kernel.org
Cc: Wim Van Sebroeck <wim@iguana.be>
Subject: Re: [PATCH v2 1/2] watchdog: ep93xx_wdt: cleanup and let the core handle the heartbeat
Date: Tue, 31 Jan 2017 04:16:05 -0800 [thread overview]
Message-ID: <da61b501-331f-e335-d1ea-db1e8f35b5e8@roeck-us.net> (raw)
In-Reply-To: <20170130210109.71699-2-hsweeten@visionengravers.com>
On 01/30/2017 01:01 PM, H Hartley Sweeten wrote:
> Cleanup this driver and remove the 200ms heartbeat timer. The core now
> has the ability to handle the heartbeat.
>
> Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
> Cc: Wim Van Sebroeck <wim@iguana.be>
> Cc: Guenter Roeck <linux@roeck-us.net>
> ---
> drivers/watchdog/ep93xx_wdt.c | 111 ++++++++++++++++--------------------------
> 1 file changed, 43 insertions(+), 68 deletions(-)
>
> diff --git a/drivers/watchdog/ep93xx_wdt.c b/drivers/watchdog/ep93xx_wdt.c
> index 0a4d7cc..04be2de 100644
> --- a/drivers/watchdog/ep93xx_wdt.c
> +++ b/drivers/watchdog/ep93xx_wdt.c
> @@ -19,21 +19,13 @@
> * for us to rely on the user space daemon alone. So we ping the
> * wdt each ~200msec and eventually stop doing it if the user space
> * daemon dies.
> - *
> - * TODO:
> - *
> - * - Test last reset from watchdog status
> - * - Add a few missing ioctls
> */
>
> #include <linux/platform_device.h>
> #include <linux/module.h>
> #include <linux/watchdog.h>
> -#include <linux/timer.h>
> #include <linux/io.h>
>
> -#define WDT_VERSION "0.4"
> -
> /* default timeout (secs) */
> #define WDT_TIMEOUT 30
>
> @@ -43,57 +35,47 @@ MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started");
>
> static unsigned int timeout = WDT_TIMEOUT;
Better would be to initialize this with 0 and initialize wdd->timeout with WDT_TIMEOUT.
This way the core actually looks for a devicetree parameter, has a chance to validate
the provided timeout, and to retain the default if it is bad.
> module_param(timeout, uint, 0);
> -MODULE_PARM_DESC(timeout,
> - "Watchdog timeout in seconds. (1<=timeout<=3600, default="
> +MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds. (default="w
> __MODULE_STRING(WDT_TIMEOUT) ")");
>
> -static void __iomem *mmio_base;
> -static struct timer_list timer;
> -static unsigned long next_heartbeat;
> -
> #define EP93XX_WATCHDOG 0x00
> #define EP93XX_WDSTATUS 0x04
>
> -/* reset the wdt every ~200ms - the heartbeat of the device is 0.250 seconds*/
> -#define WDT_INTERVAL (HZ/5)
> -
> -static void ep93xx_wdt_timer_ping(unsigned long data)
> -{
> - if (time_before(jiffies, next_heartbeat))
> - writel(0x5555, mmio_base + EP93XX_WATCHDOG);
> -
> - /* Re-set the timer interval */
> - mod_timer(&timer, jiffies + WDT_INTERVAL);
> -}
> +struct ep93xx_wdt_priv {
> + void __iomem *mmio;
> + struct watchdog_device wdd;
> +};
>
> static int ep93xx_wdt_start(struct watchdog_device *wdd)
> {
> - next_heartbeat = jiffies + (timeout * HZ);
> + struct ep93xx_wdt_priv *priv = watchdog_get_drvdata(wdd);
>
> - writel(0xaaaa, mmio_base + EP93XX_WATCHDOG);
> - mod_timer(&timer, jiffies + WDT_INTERVAL);
> + writel(0xaaaa, priv->mmio + EP93XX_WATCHDOG);
>
> return 0;
> }
>
> static int ep93xx_wdt_stop(struct watchdog_device *wdd)
> {
> - del_timer_sync(&timer);
> - writel(0xaa55, mmio_base + EP93XX_WATCHDOG);
> + struct ep93xx_wdt_priv *priv = watchdog_get_drvdata(wdd);
> +
> + writel(0xaa55, priv->mmio + EP93XX_WATCHDOG);
>
> return 0;
> }
>
> -static int ep93xx_wdt_keepalive(struct watchdog_device *wdd)
> +static int ep93xx_wdt_ping(struct watchdog_device *wdd)
> {
> - /* user land ping */
> - next_heartbeat = jiffies + (timeout * HZ);
> + struct ep93xx_wdt_priv *priv = watchdog_get_drvdata(wdd);
> +
> + writel(0x5555, priv->mmio + EP93XX_WATCHDOG);
>
> return 0;
> }
>
> static const struct watchdog_info ep93xx_wdt_ident = {
> .options = WDIOF_CARDRESET |
> + WDIOF_SETTIMEOUT |
> WDIOF_MAGICCLOSE |
> WDIOF_KEEPALIVEPING,
> .identity = "EP93xx Watchdog",
> @@ -103,55 +85,50 @@ static struct watchdog_ops ep93xx_wdt_ops = {
> .owner = THIS_MODULE,
> .start = ep93xx_wdt_start,
> .stop = ep93xx_wdt_stop,
> - .ping = ep93xx_wdt_keepalive,
> -};
> -
> -static struct watchdog_device ep93xx_wdt_wdd = {
> - .info = &ep93xx_wdt_ident,
> - .ops = &ep93xx_wdt_ops,
> + .ping = ep93xx_wdt_ping,
> };
>
> static int ep93xx_wdt_probe(struct platform_device *pdev)
> {
> + struct ep93xx_wdt_priv *priv;
> + struct watchdog_device *wdd;
> struct resource *res;
> unsigned long val;
> - int err;
> + int ret;
> +
> + priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
> + if (!priv)
> + return -ENOMEM;
>
> res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> - mmio_base = devm_ioremap_resource(&pdev->dev, res);
> - if (IS_ERR(mmio_base))
> - return PTR_ERR(mmio_base);
> + priv->mmio = devm_ioremap_resource(&pdev->dev, res);
> + if (IS_ERR(priv->mmio))
> + return PTR_ERR(priv->mmio);
>
> - if (timeout < 1 || timeout > 3600) {
> - timeout = WDT_TIMEOUT;
> - dev_warn(&pdev->dev,
> - "timeout value must be 1<=x<=3600, using %d\n",
> - timeout);
> - }
> + val = readl(priv->mmio + EP93XX_WATCHDOG);
>
> - val = readl(mmio_base + EP93XX_WATCHDOG);
> - ep93xx_wdt_wdd.bootstatus = (val & 0x01) ? WDIOF_CARDRESET : 0;
> - ep93xx_wdt_wdd.timeout = timeout;
> - ep93xx_wdt_wdd.parent = &pdev->dev;
> + wdd = &priv->wdd;
> + wdd->bootstatus = (val & 0x01) ? WDIOF_CARDRESET : 0;
> + wdd->info = &ep93xx_wdt_ident;
> + wdd->ops = &ep93xx_wdt_ops;
> + wdd->min_timeout = 1;
> + wdd->max_hw_heartbeat_ms = 200;
> + wdd->parent = &pdev->dev;
>
> - watchdog_set_nowayout(&ep93xx_wdt_wdd, nowayout);
> + watchdog_set_nowayout(wdd, nowayout);
> + watchdog_init_timeout(wdd, timeout, &pdev->dev);
>
> - setup_timer(&timer, ep93xx_wdt_timer_ping, 1);
> + watchdog_set_drvdata(wdd, priv);
>
> - err = watchdog_register_device(&ep93xx_wdt_wdd);
> - if (err)
> - return err;
> + ret = devm_watchdog_register_device(&pdev->dev, wdd);
> + if (ret)
> + return ret;
>
> - dev_info(&pdev->dev,
> - "EP93XX watchdog, driver version " WDT_VERSION "%s\n",
> - (val & 0x08) ? " (nCS1 disable detected)" : "");
> + platform_set_drvdata(pdev, priv);
Now unnecessary.
Thanks,
Guenter
>
> - return 0;
> -}
> + dev_info(&pdev->dev, "EP93XX watchdog driver %s\n",
> + (val & 0x08) ? " (nCS1 disable detected)" : "");
>
> -static int ep93xx_wdt_remove(struct platform_device *pdev)
> -{
> - watchdog_unregister_device(&ep93xx_wdt_wdd);
> return 0;
> }
>
> @@ -160,7 +137,6 @@ static struct platform_driver ep93xx_wdt_driver = {
> .name = "ep93xx-wdt",
> },
> .probe = ep93xx_wdt_probe,
> - .remove = ep93xx_wdt_remove,
> };
>
> module_platform_driver(ep93xx_wdt_driver);
> @@ -170,4 +146,3 @@ MODULE_AUTHOR("Alessandro Zummo <a.zummo@towertech.it>");
> MODULE_AUTHOR("H Hartley Sweeten <hsweeten@visionengravers.com>");
> MODULE_DESCRIPTION("EP93xx Watchdog");
> MODULE_LICENSE("GPL");
> -MODULE_VERSION(WDT_VERSION);
>
next prev parent reply other threads:[~2017-01-31 14:56 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-01-30 21:01 [PATCH v2 0/2] watchdog: cleanup ep93xx platform drivers H Hartley Sweeten
2017-01-30 21:01 ` [PATCH v2 1/2] watchdog: ep93xx_wdt: cleanup and let the core handle the heartbeat H Hartley Sweeten
2017-01-31 12:16 ` Guenter Roeck [this message]
2017-01-30 21:01 ` [PATCH v2 2/2] watchdog: ts72xx_wdt: convert driver to watchdog core H Hartley Sweeten
2017-01-31 12:25 ` Guenter Roeck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=da61b501-331f-e335-d1ea-db1e8f35b5e8@roeck-us.net \
--to=linux@roeck-us.net \
--cc=hsweeten@visionengravers.com \
--cc=linux-watchdog@vger.kernel.org \
--cc=wim@iguana.be \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox